2013 SSANGYONG KORANDO Service Manual

8010-01
Operations for power supply in STD
The operation input before the LCD backlight is illuminated, right after the ignition is turned OFF or ON,
is ignored.
detected.
The LCD display, LCD backlight, dial lamp and indicator lamp are turned on or off by the ignition
switch ON/OFF operation. -
-
-

Brightness in SVC
(2) Illumination Level
Brightness in STD
Operating power Illumination levelMain LCD, dial point
Day Night
B+
(B-CAN Wake UP) - OFF OFF
IGN 1 Level 1 100% 20%
Level 2 100% 30%
Level 3 100% 40%
Level 4 100% 50%
Level 5 100% 60%
Level 6 100% 70%
Illumination
levelDOT LCDODO, gauge LCD, dial pointer
Day Night Day Night
B+(B-CAN
Wake UP) Initial
time
-Level 6 Level 6OFF (however, level 6 for initial
operation with B+ & IGN1 ON)
After
initial
timeMaintain
previous
levelMaintain
previous
levelOFF (however, maintains
previous level for initial operation
with B+ & IGN1 ON)
IGN 1 Level 1 25% 5% 25% 5%
Level 2 40% 12% 40% 12%
Level 3 55% 19% 55% 19%
Level 4 70% 26% 70% 26%
Level 5 85% 33% 85% 33%
Level 6 100% 40% 100% 40% Operating power
IGN 1

8010-01
(1) SVC
Symbols in SVC
5) System Analysis

Symbols in SVC (via CAN)

8010-01
The pre-warning of the MICOM control warning is performed 400 ms after turning the ignition switch to
ON position.
IGN ON detecting time: 40~80 ms after turning ignition switch to ON position -
- The pre-warning is performed for 4 seconds after turning the ignition switch to ON position. BCM checks
that the warning lamps (ABS, ESP, ESP OFF, 4WD CHECK, 4WD LOCK) are matched with CAN
signals.
The pre-warning is performed by the variant code.

(2) STD
Symbols in STD

8010-01
The pre-warning of the MICOM control warning is performed 400 ms after turning the ignition switch
to ON position.
IGN ON detecting time: 40~80 ms after turning ignition switch to ON position -
- The pre-warning is performed for 4 seconds after turning the ignition switch to ON position. BCM checks
that the warning lamps (ABS, ESP, ESP OFF, 4WD CHECK, 4WD LOCK) are matched with CAN
signals.
The pre-warning is performed by the variant code.

Symbols in STD (via CAN)