Page 489 of 828
03-117010-06
Principal of induced electromotive force
Primary magnetic induction coil
(for charging battery)Secondary magnetic
induction coil
1. If the current flows into the secondary coil, a magnetic field is formed as above.
Primary magnetic induction coil
(for charging battery)Secondary magnetic
induction coil
The magnetic field occurred in the secondary coil interrupts the magnetic field in
the primary coil. 2.
The magnetic field induced in the primary coil in this way creates the
electromotive force by letting the current flow through the coil. 3.
Page 490 of 828
Page 491 of 828
03-137010-06
5. REKES OPERATION LOGIC
1) Remote Door Lock
When briefly pressing the door lock switch on the remote control key for less than 0.5
seconds, all doors are locked.
The system outputs the "LOCK" signal immediately after receiving the door lock message from
the remote control key. If the vehicle is locked while all doors including engine hood are
closed, the theft deterrent mode is activated (hazard warning lamps are blinking twice). 1.
2.
Page 492 of 828
03-14
2) Door Unlock
When briefly pressing the door unlock switch on the remote control key for less than 0.5
seconds, all doors are unlocked.
When receiving the DOOR UNLOCK message from the remote control key, the door unlock
relay is turned on for 0.5 seconds.
The hazard warning lamps blink once only when all the doors unlocked successfuly. 1.
2.
3.
Page 493 of 828
03-157010-06
3) Remote Escort
When you press and hold the PANIC button (more than 0.5 seconds) the escort function is
activated.
The headlamp comes on for 20 seconds and goes off automatically, when the escort
message is received from the remote control key. 1.
2.
4) Remote Panic
When pressing and holding the PANIC button on the remote control key for more than 2
seconds, the panic function is activated.
The vehicle activates the panic alarm by using the horn for 27 seconds when receiving the
panic message from the remote control key. 1.
2.
Page 494 of 828
04-38210-01
1. SPECIFICATIONS
Item Specification
Rated voltage DC 13.5 V
Operating voltage DC 9 V ~ 16 V
Checking voltage DC 13.5 V
Operating temperature-30℃ ~ +80℃
Storage temperature-40℃ ~ +85℃
Illumination color Dial White
Pointer Red
LCD Red
Gear position display in A/T
(Left hand of LCD display)P, R, N, D, 1, 2, 3, 4, 5 and 6
Page 495 of 828

04-4
1. DESCRIPTIONS OF INDICATOR DISPLAY
Tachometer
ESP indicator/warning light
Immobilizer indicator
Glow indicator
Front fog light indicator
High beam indicator
ESP OFF indicator
Seat belt reminder (driver’s seat)
Seat belt reminder (passenger’s seat)
Engine oil pressure warning light
LCD Display
Engine overheat warning light
Engine check warning light
Auto cruise indicator
Light indicator
Winter mode indicator 1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.Engine hood open warning light
Battery charge warning light
Hazard Indicator
Water separator warning light
Air bag warning light
4WD CHECK warning light
4WD LOW indicator
4WD HIGH indicator
Speedometer
Turn signal indicator
Coolant temperature gauge
Brake warning light
Door ajar warning light
ABS warning light
Fuel gauge
Low fuel level warning light 17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32. It sends and receives information to/from each unit through CAN communication line. The LCD
display and separate ESP ON/OFF indicator are newly added.
Page 496 of 828
04-58210-01
B. Sub connector (gray)A. Main connector (white)
System Layout ▶
Front view
Rear view
NO.1 NO.10
NO.11
NO.20NO.1
NO.20 NO.10
NO.11