2006 LAND ROVER FRELANDER 2 charging

Publi s hed: 11-May-2011
Electronic Engine Controls - TD4 2.2L Diesel - Clutch Pedal Position (CPP)
SwitchLHD AWD
Removal and Inst all ati on
Removal
Di sconnect t he bat t ery ground cable.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
1.
Remove t he dri ver l ower ai r bag.
Refer t o: Dri ver Lower Air Bag Module (501-20B SupplementalRes traint Sys t em, Removal and Inst all at ion).
2.
3.
Installation
To i nst all , revers e t he removal procedure.1.

Publi s hed: 11-May-2011
Electronic Engine Controls - TD4 2.2L Diesel - Clutch Pedal Position (CPP)
SwitchRHD AWD
Removal and Inst all ati on
Removal
Di sconnect t he bat t ery ground cable.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
1.
Remove t he dri ver l ower ai r bag.
Refer t o: Dri ver Lower Air Bag Module (501-20B Supplemental
Res traint Sys t em, Removal and Inst all at ion).
2. 3.
4.
Installation To i nst all , revers e t he removal procedure.
1.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Selector Shaft SealI6 3.2L Petrol
Removal and Inst all ati on
Removal
• NOTE: Removal s t eps in t his procedure may cont ain i nst all ati on det ail s.
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he transmis si on cont rol module (TCM).
Refer t o: Transmis s ion Control Modul e (TCM) - I6 3.2L Petrol (307-01Automat ic Transmis si on/Trans axl e, Removal and Ins t allat ion).
3.
4. CAUTIONS:
Take extra care not t o damage t he mati ng faces .
"Make s ure t hat a new component i s ins t al led. "
4.
Installation
1. CAUTIONS:
Make s ure that t he mat ing faces are clean and free of foreignmat eri al .
Ins tall t he s eal , fl ush wit h t he transmis s ion case.
To i nst all , revers e t he removal procedure.
1.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Selector Shaft SealTD4 2.2L Diesel
Removal and Inst all ati on
Removal
• NOTE: Removal s t eps in t his procedure may cont ain i nst all ati on det ail s.
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he transmis si on cont rol module (TCM).
Refer t o: Transmis s ion Control Modul e (TCM) - TD4 2.2L Di es el(307-01 Automat ic Trans mi s si on/Trans axl e, Removal andInst all at ion).
3.
4. CAUTIONS:
Take extra care not t o damage t he mati ng faces .
"Make s ure t hat a new component i s ins t al led. "
4.
Installation
1. CAUTIONS:
Make s ure that t he mat ing faces are clean and free of foreignmat eri al .
Ins tall t he s eal , fl ush wit h t he transmis s ion case.
To i nst all , revers e t he removal procedure.
1.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Control Module (TCM)I6
3.2L Petrol
Removal and Inst all ati on
Removal
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he A/C compress or mounti ng bracket .
Refer t o: Acces sory Dri ve Component Bracket (303-05A Access oryDrive - I6 3.2L Pet rol , Removal and Ins t al lat ion).
3.
Releas e and dis connect the sel ect or l ever cable.4.
Releas e t he s upport bracket.5.

Remove t he transmis si on s elector lever.
6. 7.
Installation Inst all t he TCM.
T orque: 24 Nm 1.
Inst all t he transmis si on s elector lever.
T orque: 13 Nm 2.
Secure and connect the sel ect or lever cable.
3.
Inst all t he s upport bracket.
T orque: 25 Nm 4.
Inst all t he A/C compress or mounti ng bracket .
Refer t o: Acces sory Dri ve Component Bracket (303-05A Access ory
Drive - I6 3.2L Pet rol , Removal and Ins t al lat ion).
5.
Connect t he batt ery ground cable and ins tall t he cover.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
6.
If a new component has been ins t al led, configure usi ng Land Rover
approved diagnos t ic equipment .
7.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Control Module
(TCM)TD4 2.2L Diesel
Removal and Inst all ati on
Removal
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he air cleaner as s embly.
Refer t o: Air Cleaner (303-12A Intake Ai r Dis tribut ion and Fil tering -I6 3.2L Pet rol, Removal and Ins t al lat ion).
3.
Releas e and dis connect the sel ect or l ever cable.4.
Remove t he transmis si on s elector lever.5.

Remove t he transmis si on cont rol module (TCM).
6.
Installation Inst all t he TCM.
T orque: 24 Nm 1.
Inst all t he transmis si on s elector lever.
T orque: 13 Nm 2.
Secure and connect the sel ect or lever cable.
3.
Inst all t he air cleaner as s embly.
Refer t o: Air Cleaner (303-12A Intake Ai r Dis tribut ion and Fil tering -
I6 3.2L Pet rol, Removal and Ins t al lat ion).
4.
Connect t he batt ery ground cable.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
5.
If a new component has been ins t al led, configure usi ng Land Rover
approved diagnos t ic equipment .
6.