2006 LAND ROVER FRELANDER 2 charging

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Torque Converter SealI6 3.2L Petrol
Removal and Inst all ati on
Special T ool(s) 307-597
Inst all er, Torque Converter Seal 307-613
Hol di ng Pins , Torque Converter
Removal 1. W ARNING: Make sure t o s upport the vehicle wit h axle
s tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
2.
Remove t he transmis si on and convert er.
Refer t o: Transmis s ion - I6 3.2L Pet rol (307-01 Automat ic
Trans mi ss ion/Transaxle, Removal).
3.
Remove t he torque convert er retai ner.
4. 5.
CAUTIONS: Be prepared t o collect es caping oi l.
Make s ure that all openings are sealed.
Remove t he torque convert er.
Speci al Tool (s ): 307-613 5.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Torque Converter SealTD4 2.2L Diesel
Removal and Inst all ati on
Special T ool(s) 307-597
Inst all er, Torque Converter Seal 307-613
Hol di ng Pins , Torque Converter
Removal 1. W ARNING: Make sure t o s upport the vehicle wit h axle
s tands .
Rais e and s upport t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
2.
Remove t he transmis si on and convert er.
Refer t o: Transmis s ion - TD4 2.2L Dies el (307-01 Aut omati c
Trans mi ss ion/Transaxle, Inst all ati on).
3.
Remove t he torque convert er retai ner.
4. 5.
CAUTIONS: Be prepared t o collect es caping oi l.
Make s ure that all openings are sealed.
Remove t he torque convert er.
Speci al Tool (s ): 307-613 5.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Fluid Pan, Gasket and
Filter
Removal and Inst all ati on
Removal
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
1.
2. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
2.
Drai n t he t ransmis s ion fluid.
Refer t o: Transmis s ion Flui d Drai n and Refi ll - I6 3.2L Pet rol (307-01Automat ic Transmis si on/Trans axl e, General Procedures ).
3.
Remove t he front subframe as s embly.
Refer t o: Front Subframe (502-00 Uni -Body, Subframe and Mount ingSyst em, Removal and Ins tall ati on).
4.
5. CAUTION: Be prepared to col lect escaping oil .5.
Remove t he gas ket.6.
Installation
For seal ant s peci fi cat ion, refer to t he s peci fi cat ions s ect ion.
Refer t o: Specificati ons (307-01 Aut omati c Trans mis s ion/Trans axle,Speci fi cat ions ).
1.

Apply a bead of s ealant, 3 mm diamet er, to the area
i ndi cat ed.
2.
Inst all t he fl uid pan.
T orque: 14 Nm 3.
Inst all t he front subframe.
Refer t o: Front Subframe (502-00 Uni -Body, Subframe and Mount ing
Syst em, Removal and Ins tall ati on).
4.
Connect t he batt ery ground cable and ins tall t he cover.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
5.
Refi ll t he transmis s ion wi th flui d.
Refer t o: Transmis s ion Flui d Drai n and Refi ll - I6 3.2L Pet rol (307-01
Automat ic Transmis si on/Trans axl e, General Procedures ).
6.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Main Control Valve Body
Removal and Inst all ati on
Removal
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
1.
2. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
2.
Remove t he oil pan.
Refer t o: Transmis s ion Flui d Pan (307-01 Automat icTrans mi ss ion/Transaxle, Removal and Ins tal lati on).
3.
Remove the oi l temperat ure sens or.4.
5. CAUTIONS:
Take ext ra care not t o damage the wiring harnes ses .
Not e the fi tt ed posi ti on of the component prior t oremoval.
Release the trans mi ss i on wiring harnes s .
5.
Remove the sucti on cover and dis card t he gas ket .6.

T orque:
10 Nm Inst all t he oil pan.
Refer t o: Transmis s ion Flui d Pan (307-01 Automat ic
Trans mi ss ion/Transaxle, Removal and Ins tal lati on).
6.
Connect t he batt ery ground cable and ins tall t he cover.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
7.

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - TransmissionI6 3.2L Petrol
Removal
Special T ool(s) 205-857
Remover, Halfs haft 303-021
Engine s upport bracket 303-1219
Locki ng Tool , Crankshaft 303-662
Support Beam Arm and Hook As s embly, Engi ne
General Equipment Powert rai n Jack
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
1.
2. W ARNING: Make sure t o s upport the vehicle wit h axle
s tands .
Rais e and s upport t he vehi cl e.
2.
Remove t he s tart er mot or.
Refer t o: Start er Motor (303-06A Starti ng Sys t em - I6 3.2L Pet rol ,
Removal and Ins tall ati on).
3.
Drai n t he t ransmis s ion fluid.
Refer t o: Transmis s ion Flui d Drai n and Refi ll - I6 3.2L Pet rol (307-01
Automat ic Transmis si on/Trans axl e, General Procedures ).
4.
Drai n t he cool ant .
5.

Inst all t he acces sory dri ve pul ley.
Refer t o: Acces sory Dri ve Pulley (303-05A Acces s ory Drive - I6 3.2LPetrol, Removal and Ins tall ati on).
27.
Inst all t he s tart er mot or.
Refer t o: Start er Motor (303-06A Starti ng Sys t em - I6 3.2L Pet rol ,Removal and Ins tall ati on).
28.
Connect t he batt ery ground cable and ins tall t he cover.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
29.
Fil l and bl eed the cooli ng s ys t em.
Refer t o: Cool ing Sys tem Drai ni ng, Fi lli ng and Bleeding (303-03AEngine Cooli ng - I6 3.2L Petrol, General Procedures).
30.
Refi ll t he transmis s ion wi th flui d.
Refer t o: Transmis s ion Flui d Drai n and Refi ll - I6 3.2L Pet rol (307-01Automat ic Transmis si on/Trans axl e, General Procedures ).
31.
If a new component i s t o be ins t al led, configure usi ng Land Roverapproved diagnos t ic equipment .32.
33. NOTE: For NAS vehicles onl y.
If fi tt ing new or exchange component s , carry out l ong drive cycl e.
Refer t o: Powertrain Cont rol Modul e (PCM) Long Drive Cycle Sel f-Tes t(303-14A, General Procedures ).
33.