2003 MITSUBISHI SHOGUN Owner's Manual (in English)

Folding the rear seat
(3-door models)/
second seat (5-door models)
EG24COI
To create luggage space, you can fold the
rear seat.
On 5-door models, by folding the second
seat, you can get in and out easier.
Refer to“To get in and out of the third seat”
on page 3-13.
G47B007E
To fold1. On vehicle equipped with a rear shelf,
pull the 4 clips (A) on the front of the
rear shelf to separate them from the
attachment points on the rear seat.
NOTE
Be sure to hold the clips (A) when remov-
ing the clips.
G23F071A
2. Lift up the knob (B) behind the seat-
back, then tilt the seatback forward.
Seat and seat belts
3-17
Div:
Out put date:

G23F038A
3. Lift the seat until you hear a“click”.
G23F072A
To replace
1. Hold the seat with your hand, then return
the seat to its original position while
pushing the stopper (C).
G23F040A
2. Push the seat until you hear a“click”and
the seat locks securely.
Seat and seat belts
3-18Div:
Out put date:

G23F041A
3. Raise the seatback until it locks securelyinto place.
Push lightly on the seatback to con-
firm that it has actually been secured.
G24E028A
Storage of the third seat
EG24E-Ic
By folding the third seat into the luggage
floor box, large articles can be stored in the
vehicle.
To store
1. Remove the luggage floor board (A) andhead restraints (B).
Refer to “Luggage floor box ”on page
6-66 an d“Hea drestraints ”on page
3-28.
G24E096A
2. Store the head restraints in the lug- gage net.
Install the head restraints stay into the
bands (C), and secure the head
restraints the with bands (D).
NOTE
Tighten the bands (D) securely but gen-
tly. If the bands are too tight, the head
restraints may get wrinkled.
Seat and seat belts
3-19
Div:
Out put date:

G24E030A
3. Pull up the knob (E) on the side of the
seatback, then tilt the seatback for-
ward.
G24E031A
4. Push the lever (F) forward, then tilt the
seatback forward until the seatback
touches the seat cushion.
G24E032A
5. Pull the lever (G), fold the seat back-
ward, and store it into the luggage floor
box.
Seat and seat belts
3-20Div:
Out put date:

G24F014A
CAUTION
(1) When folding the seat away into
the luggage floor box, hold the
seat by hand and fold it slowly.
If the seat is not held properly, it
might fall under its own weight
during folding and pinch your
hand.
(2) Ensure that the lever (G) is not
operated while the seat is occu-
pied. The folding action of the
seat in such a situation could
result in an unexpected acci-
dent.
(3) When folding the seat, be sure
not to trap your hands between
seat and luggage floor box.
G24E033A
6. Fold down the stand (H).
7. Refit the luggage floor board.
G24E024A
To replace
1. Remove the luggage floor board. And
then raise the stand.
2. Raise the seat forward until you hear a
“click”and the seat locks securely.
Seat and seat belts
3-21
Div:
Out put date:

G24E034A
3. Push the knob (I) forward, and raise the
seatback until it locks securely into
place.
After the operation, push lightly on the
seatback to confirm that it has actually
been secured.
4. Refit the luggage floor board and head
restraints.
Removal of the third seat
EG24F-Gb
To create more luggage space, you can
remove the third seat.
CAUTION
(1) For safety, do not allow chil-
dren to remove or refit the seat.
(2) Be careful not to trap your hands
or feet when removing or refit-
ting the seat. Also, be careful not
to drop or trip over the seat. If
necessary, have someone help
you to remove it.
G24E061A
Removal procedure
1. Pull up the knob (A) on the side of the
seatback, then tilt the seatback for-
ward.
Seat and seat belts
3-22Div:
Out put date:

G24F032A
2. Push the lever (B) forward, then tilt the
seatback forward until the seatback
touches the seat cushion.
G24F029A
3. Pull the seat lock lever (C).
G24F030A
4. Fold the stands (D) towards you from
the seat side, while lifting the front end
of the seat.
Seat and seat belts
3-23
Div:
Out put date:

G24F028A
5. Put down the front end of the seat to the
floor. In this situation, the seat locking
system is unlocked automatically.
G24F025E
GH EE FF
6. Remove the covers (E) by turning the
knob (F) anticlockwise.
G- Unlock
H- Lock
G24F024E
7. Hold the seat as shown in the illustra-
tion and remove the seat by sliding it
backward.
Seat and seat belts
3-24Div:
Out put date: