2003 MITSUBISHI SHOGUN Owner's Manual (in English)

H11A392D
Radio data system (RDS)
EH30COH
1- PWR (On-off) switch
2- TP (Traffic program) button
3- PTY (Program type) button
4- U/M/L (UKW/MW/LW selection) button
5- TUNE/SEEK (Down-step/Down-seek) button
6- TUNE/SEEK (Up-step/Up-seek) button
7- Memory select buttons
8- Frequency display window
9- RDS (Radio data system) indicator
10- REG (Regional program) indicator
11- TP (Traffic program identification) indicator
12- PTY (Program type) indicator
13- AF (Alternative frequencies) indicator
For pleasant driving
6-21
Div:
Out put date:

RDS uses PI (program identification) sig-
nal and AF (alternative frequency) list trans-
mitted in addition to the normal UKW
broadcasting programs, and picks up the
UKW stations that are transmitting the
same program from the EON (enhanced
other network) and automatically tunes to
the station with the strongest signal inten-
sity.
Therefore, you can continue listening to
one program in, for example, a long dis-
tance driving without returning to other sta-
tion transmitting the same program when
you are leaving the service area of the cur-
rently receiving station.
The RDS radio also features the limited
reception of the program types, the break-in
reception of the traffic announcement and
emergency broadcast, and the limited
/unlimited reception of the regional pro-
grams.AF (Alternative Frequencies) function
The AF function finds a station broadcast-
ing the same program, and selects sta-
tion with the strongest signal of AF lists.
The AF function is tuned on (with the AF
indicator (13) shown on the display) at all
times unless you manually switch off.
To turn the function off, at first, switch off
the power from UKW mode, and while
pressing the No.5 of the memory select
buttons (7), press the PWR switch (1) until
it beeps. The AF indicator (13) on the dis-
play will turn off.
To turn the function on, use the same pro-
cedure.
REG (Regional) function
REG function limits to receive the sta-
tions broadcasting regional programs.
Regional programming and regional net-
works are organized differently depend-
ing on the country or area (they may be
changed according to the hour, state, or
broadcast area), so if you don’t want to
receive the regional programs automati-
cally, you can set up REG ON not to
receive regional programs.
To turn the function on, switch off the power
from UKW mode, and while pressing the
side of the TUNE/SEEK button (5),
press the PWR switch (1) until it beeps.
The“REG ON”will be shown on the dis-
play.To turn the function off, use the same pro-
cedure.
PI (Program Identification) search func-
tion
When traveling long distance and the
recalled preset station is weak, radio
searches another frequency broadcast-
ing the same programming with the same
PI code in AF list.
If there are no frequencies broadcasting the
same programming, the radio searches a
frequency broadcasting the regional pro-
gramming. The radio succeeds in search-
ing the regional programming, then the
display shows the REG indicator (10).
If the radio does not succeed in search-
ing the regional programming, the radio
returns to the recalled preset station.
For pleasant driving
6-22Div:
Out put date:

PTY (Program type)
RDS broadcasts are classified according to
program type (PTY) as follows. Use the
TUNE/SEEK button (5 or 6) to select your
desired PTY.
1. NEWS
2. AFFAIRS (Current affairs)
3. INFO (Information)
4. SPORT
5. EDUCATE (Education)
6. DRAMA
7. CULTURE
8. SCIENCE
9. VARIED
10. POP M (Pop music)
11. ROCK M (Rock music)
12. EASY M (Easy music)
13. LIGHT M (Light classic)
14. CLASSICS
15. OTHER M (Other music)
16. WEATHER (Weather information)
17. FINANCE
18. CHILDREN
19. SOCIAL
20. RELIGION
21. PHONE IN
22. TRAVEL
23. LEISURE
24. JAZZ
25. COUNTRY
26. NATION M (National music)
27. OLDIES
28. FOLK M (Folk music)
29. DOCUMENT
H11A249A
To search for a broadcast of desired pro-
gram type:
1. Press the PTY button (3).
2. Press the TUNE/SEEK button (5 or 6)
for less than 1 second at a time to select
your desired PTY.
3. 2 seconds after a desired PTY has been
selected, the radio will begin to search
for a broadcast of your selected PTY.
During search, the selected PTY on the
display blinks, and the radio will begin
to search for a broadcast of your
selected PTY.
4. When the radio picks up a station with
your desired PTY, the display will show
the name of the station.NOTE
(1) If the TUNE/SEEK button (5 or 6) is
pressed for more than 1 second, the
radio will try to find out another broad-
cast of the same program type as cur-
rently selected.
(2) If no station is found with your desired
PTY, the display will show“EMPTy”for
about 5 seconds, and the radio will
return to the previous station.
How to enter PTYs in the memoryAs many as 6 PTYs can be entered in the
memory.
Follow the steps described below.
1. Press either the TUNE/SEEK button (5
or 6)to tune the PTY to be entered in the
memory.
2. Press one of the memory select but-
tons (7) for about 2 seconds or longer.
The sound will be momentarily inter-
rupted while the PTY is being entered
into the memory. The number of the but-
ton corresponding to the entry into the
memory, and the PTY are displayed.
3. The preset memory setting is retrieved
by pressing the button and then releas-
ing it within about 2 seconds.
NOTE
Disconnecting the battery terminal erases
all PTYs stored in the memory.
For pleasant driving
6-23
Div:
Out put date:

H11A265G
To change the language of PTY dis-
play (Vehicles equipped with the
Multi centre display)You can select your favourite language
between English, French, German, Swed-
ish, Spanish, Italian.
1. Turn off the radio.
2. Turn the radio back on while holding
down the PTY button (B).
3. An alarm will sound and the system will
enter PTY Language Switching mode.
4. Use the H button (C) or the M button (D)
to select the desired language. Press
the SET button (E) to register your
selection.
5. Press the button on the left (A) to can-
cel the selection. The system will revert
to the settings prior to accessing PTY
Language Switching mode.
H11A250G
For pleasant driving
6-24Div:
Out put date:

H11A372A
(Vehicles equipped with the RV
meter)You can select your favourite language
between English, French, German, Swed-
ish, Spanish, Italian.
1. Press the“ADJ”button to display the
options for the function buttons.
H11A373A
2. Press the“RDS.LANG.”function but-
ton.
H11A374A
3. Press the“
”or“”function button to
select the desired language.
For pleasant driving
6-25
Div:
Out put date:

H11A375A
4. When the language has been adjusted,
press the“SET”function button.
NOTE
For safety, these operations can only be
carried out when the vehicle is not mov-
ing.Traffic information
The radio will automatically tune in to traf-
fic information broadcasts while receiving
UKW broadcasts, playing cassettes.
To select this function, follow the instruc-
tions below.
1. Press the TP button (2). The display will
show“TP”(11). If the RDS data can
read, the display will show“RDS”(9). If
not, the display will show“NO RDS”for
about 5 seconds.
2. If the radio detects traffic information on
either the station currently selected or on
another station, the display will show
“TRAF INF”for 5 seconds followed by
a 2-second indication of the fre-
quency. Then, it will show the name of
the station broadcasting the traffic infor-
mation to which you will listen. The vol-
ume level is set separately for listening
to normal audio programs and for lis-
tening to traffic information. The vol-
ume level will therefore change
automatically to that set when traffic
information was last received. When the
traffic information broadcast is over, the
radio will return to the previously
received program and to the corre-
sponding volume level.
3. Press the TP button (2) to return to the
previous condition.NOTE
While“TP”is illuminated, the radio stops
only at TP stations even if the TUNE/SEEK
button (5 or 6) is pressed.
TP (Traffic information Program) search
function
The traffic information program standby
function is turned on (with the TP indica-
tor (11) shown on the display) and after
about 45 seconds since the RDS indica-
tor (9) turns off due to weak signal or the
tuning station is changed over from a TP
station to a station which does not broad-
cast traffic information, the sound will beep
5 times and seeks out a TP station in all
frequencies automatically.
To turn the function off, switch off the power
from UKW mode, and while pressing TP
button (2), press the PWR switch (1) until
it beeps. The“TP-S OFF”will be shown on
the display.
To turn the function on, use the same pro-
cedure.
For pleasant driving
6-26Div:
Out put date:

H11A204A
Emergency broadcasts
If an emergency broadcast is caught while
receiving a UKW broadcast or playing back
a cassette tape with the ignition switch in
“ACC ”or “ON ”position, the display will
show “ALARM ”and the emergency broad-
cast will interrupt the current program. The
volume level is set separately for listen-
ing to normal audio programs and for lis-
tening to emergency broadcasts. The
volume level will therefore change auto-
matically to that set when an emergency
broadcast was last received. When the
emergency broadcast is over, the radio will
return to the previously received program
and to the corresponding volume level.
For pleasant driving
6-27
Div:
Out put date:

H11A371D
To listen to a CD
EH30F-Ab
This radio may be connected to a MITSUBISHI genuine CD
autochanger.
Consult an authorized MITSUBISHI dealer for more details.
1- PWR (On-off) switch
2- U/M/L button
3- CD (CD mode changeover) button
4- Disc loading slot
5- CD eject button
6- DISC (Disc selection) button*
7-
(Track down) button
8-(Track up) button
9- SCAN button10- RPT (Repeat) button
11- RDM (Random) button
12- DISC indicator*
13- CD indicator
14- TRACK indicator
15- RPT (Repeat-mode) indicator
16- RDM (Random-mode) indicator
*: Operates only when equipped with CD autochanger.
For pleasant driving
6-28Div:
Out put date: