1996 FORD TAURUS Owners Manual

122 [SC09011(ALL)09/95]NOTE: If your speed increases above your set
speed while driving in
j(Overdrive)
on a downhill grade, you may want to
shift to D (Drive) to reduce vehicle
speed (or, turn
j[Overdrive] off by
depressing the O/D OFF switch on the
gearshift lever). The cruise control
cannot reduce the vehicle speed if it
goes above your set speed on a
downhill grade. For the best fuel
economy during normal driving
conditions, leave the gearshift in
j
(Overdrive), or resume as soon as
practical.
*
[SC09100(ALL)08/95]
RWARNING
Do not use the speed control in heavy
traffic or on roads that are winding,
slippery, or unpaved.
%*
[SC09200(ALL)08/95]
Accelerating With the Cruise Control
Operating
*
[SC09300(ALL)08/95]
You can use the accelerator pedal to speed up
momentarily. When you take your foot off the
accelerator, the vehicle will return to the set
speed.
% [SC09340(ALL)09/95]
NOTE: When driving in hilly terrain, at high
altitudes, or when pulling a trailer, you
may want to drive in D (Drive) (or
turnj[Overdrive] off by depressing
the O/D OFF switch). This will
improve cruise control performance.
File:07fcsct.ex
Update:Mon Jan 22 15:52:32 1996
ProCarManuals.com

123 [SC09350(ALL)03/95]
NOTE: When driving uphill, especially with a
heavy load, you may notice your speed
decreasing even if you have the cruise
control set. If the speed drops more
than 8 to 14 mph (13-23 km/h) it is
normal for the automatic cruise control
feature to be cancelled. You may need
to use the accelerator pedal to help
your vehicle maintain the selected
speed when driving up steep grades.
%*
[SC09400(ALL)08/95]
Resetting the Cruise Control
*
[SC09410(ALL)08/95]
To reset the cruise control to alower speed, use
one of the following procedures:
*
[SC09415(ALL)08/95]
q
COASTÐ Press and hold the COAST switch.
Release the switch when the vehicle slows
down to the desired speed.
*
[SC09420(ALL)08/95]
q
Lightly tap the brake pedal. When the vehicle
attains the desired speed, press the SET
ACCEL switch and release it immediately.
% [SC09425(ALL)11/94]
q
TAP-DOWNÐ Press and then quickly
release the COAST switch. Each time you
ªtapº the switch, the set speed will decrease
by 1 mph (1.6 km/h). Multiple taps will
cause the set speed to decrease in increments
of 1 mph (1.6 km/h). For example, if the
current set speed is 60 mph (96 km/h) 5 taps
of the COAST switch will decrease the
vehicle speed and SET it at 55 mph
(88 km/h).
*
[SC09430(ALL)08/95]
If vehicle speed is reduced below 30 mph
(50 km/h) by any of the above methods, then
you must manually accelerate to a speed over
30 mph (50 km/h) and reset the system.
File:07fcsct.ex
Update:Mon Jan 22 15:52:32 1996
ProCarManuals.com

124 [SC09435(ALL)02/95]To reset the cruise control to ahigher speed,
use one of the following procedures:
*
[SC09440(ALL)08/95]
q
ACCELÐ Press and hold the SET ACCEL
switch. Release the switch when the vehicle
has accelerated to the desired speed.
*
[SC09445(ALL)08/95]
q
Depress the accelerator pedal. When the
vehicle attains the desired speed, press the
SET ACCEL switch and release it
immediately.
% [SC09450(ALL)11/94]
q
TAP-UPÐ Press and then quickly release the
SET ACCEL switch. Each time you ªtapº the
switch, the set speed will increase by 1 mph
(1.6 km/h). Multiple taps will cause the set
speed to increase in increments of 1 mph
(1.6 km/h). For example, if the current set
speed is 55 mph (88 km/h) 5 taps of the SET
ACCEL switch will increase the vehicle speed
and SET it at 60 mph (96 km/h).
*
[SC10900(ALL)11/95]
Cancelling and Resuming a Set Speed
[SC11000(ALL)04/95]
If you press the brake pedal, cruise control is
cancelled. You can return to the set speed by
pressing the RESUME switch, as long as you did
not press the OFF switch. You must be driving
at least 30 mph (50 km/h).
*
[SC11300(ALL)05/95]
Your vehicle will gradually return to the
previously set speed and then maintain it.
%*
[SC11315(ALL)08/95]
To Turn Off the Cruise Control System
*
[SC11325(ALL)08/95]
Press the OFF switch.
*
[SC11400(ALL)10/95]
In addition, the cruise control is turned off each
time you turn the vehicle ignition off.
File:07fcsct.ex
Update:Mon Jan 22 15:52:32 1996
ProCarManuals.com

125
Features
*
[FV00400(ALL)02/95]
Your vehicle has a variety of features designed
for your comfort, convenience and safety. Read
this chapter to find out about standard and
optional features.
%
*
[FV00500(ALL)01/95]
Doors
% [FV01700(ALL)11/94]
Childproof Locks
[FV01800(ALL)02/95]
In addition to standard or power locks, your
vehicle has childproof locks for the rear doors. If
you set these locks, the doors cannot be opened
from the inside of the vehicle. The doors can still
be opened from the outside when the lock knobs
are raised.
[FV02200(ALL)10/95]
half page art:0000448-D
The childproof locks for the rear door
File:08fcfvt.ex
Update:Mon Jan 22 15:57:12 1996
ProCarManuals.com

126
*
[FV02300(ALL)03/95]
To set the childproof lock on each rear door,
open the rear door.
[FV02500(ALL)02/95]
Find the lever inside the label. Move the lever
up to the locked symbol.
[FV02700(ALL)02/95]
To release the childproof lock, open the rear
door from the outside. Move the lever down to
the unlocked symbol.
%*
[FV03700(ALL)04/95]
Power Door Locks (If equipped)
[FV03830(ALL)02/95]
If your vehicle has power door locks, the
controls to lock the doors are on the trim panel
of the front door. When you close the doors
after you set the door locks, the doors remain
locked. If the power mechanism ever fails, the
manual door lock will override the power
controls.
[FV03950(ALL)11/94]
one third page art:0000963-F
The power locks on the driver's door
[FV04000(ALL)04/95]
If the key is left in the driver's or passenger's
outside lock cylinder for a period of time, the
power door locks may cycle. This is a protective
feature and will not harm the locks. When the
key is removed, the locks will function normally.
File:08fcfvt.ex
Update:Mon Jan 22 15:57:12 1996
ProCarManuals.com

127 [FV04010(ALL)04/95]
Central Locking
[FV04020(ALL)04/95]
When you are unlocking the driver or front
passenger door with the key, turn it once
toward the front of the vehicle to unlock that
door only. Turn the key a second time to unlock
all doors. Turn the key once toward the rear of
the vehicle to lock all doors.
[FV04050(ALL)04/95]
Lock Disable
[FV04075(ALL)03/95]
The lock disable feature helps prevent you from
locking the keys in your vehicle. With the key in
the ignition (in any switch position) and the
driver's door open, the driver's door cannot be
locked using the front door power lock switch.
[FV04100(ALL)02/95]
Your vehicle can still be locked, while the key is
in the ignition, by manually pressing down the
lock button.
[FV04125(ALL)02/95]
Power liftgate lock Ð wagon (If equipped)
[FV04150(ALL)02/95]
The power liftgate lock is on the right inside
trim panel in the cargo area. When this lock is
pressed, all doors and the liftgate lock.
[FV04175(ALL)02/95]
one inch art:0001407-A
The power liftgate lock
File:08fcfvt.ex
Update:Mon Jan 22 15:57:12 1996
ProCarManuals.com

128 %
*
[FV04251(ALL)09/95]
Using the Keyless Entry System
(If equipped)
*
[FV04301(ALL)02/95]
If your vehicle has the keyless entry system, you
can lock or unlock the vehicle doors without
using a key. The buttons for the system are near
the outside door handle on the driver's side. See
alsoRemote Entry Systemwhich follows this
description.
[FV04351(ALL)02/95]
one third page art:0000482-C
Keyless entry buttons
*
[FV04401(ALL)02/95]
When you bought your vehicle, you were given
a computer code that operates the system for
your vehicle. For your convenience, we have
duplicated this code in two places.
*
[FV04451(ALL)09/95]
The code is:
*
[FV04501(ALL)09/95]
q
on your owner's wallet card found in the
glove compartment
*
[FV04551(ALL)02/95]
q
taped to the computer module
*
[FV04601(ALL)05/95]
When you use this entry system, the illuminated
entry system turns on the interior lights for 25
seconds and the buttons on the keypad light up
for 5 seconds. Do not push the buttons with a
key, ballpoint pen, pencil or any other hard
object. These objects could damage the buttons.
File:08fcfvt.ex
Update:Mon Jan 22 15:57:12 1996
ProCarManuals.com

129 %
*
[FV04651(ALL)09/95]
Programming your own entry code
*
[FV04700(ALL)02/95]
You can program a personal code to unlock
your vehicle with the keypad. This code does
not replace the permanent code that the
dealership gave you. Use your personal code in
the same manner as you would your original
code.
*
[FV04751(ALL)09/95]
To program your own code:
*
[FV04801(ALL)09/95]
1. Select five digits for your personal code.
*
[FV04851(ALL)09/95]
2. Enter the permanent code that the dealership
gave you.
*
[FV04901(ALL)09/95]
3. Within five seconds, press 1/2.
*
[FV04951(ALL)09/95]
4. Within five seconds of pressing 1/2, enter
your personal code, pressing each digit
within five seconds of the previous digit.
*
[FV05000(ALL)09/95]
The keyless entry system registers this
second code. To open your vehicle, you can
now use either code. The module remembers
only one personal code at a time. Entering a
second personal code will erase the first,
replacing it with the new second one.
*
[FV05050(ALL)09/95]
To erase your personal code:
*
[FV05101(ALL)09/95]
1. Enter the original permanent code.
*
[FV05150(ALL)09/95]
2. Press 1/2 within five seconds of Step 1.
*
[FV05201(ALL)09/95]
3. Wait six seconds.
*
[FV05250(ALL)09/95]
The keyless entry system automatically
erases your personal code. The system will
now only respond to the permanent code.
File:08fcfvt.ex
Update:Mon Jan 22 15:57:12 1996
ProCarManuals.com