2020 Seat Ibiza Directive 2014/53/EU Bluetooth

Page 4 of 88 Report No. : 60404489 001


TR F No. IEC62368_1 C

Summary of testing:
Tests performed (name of tes t and test clause):
All applicable tests as described in the test cases
and measurement sections were performed.
See test case and appended table for details.
This CB standard update test report is based on
CB test report No. 50040905 001, 50040905 002
an d 50040905 003 with the certificate No.
JPTUV - 071622 , JPTUV - 071622 - M 1 and
JPTUV - 071622 - M2 .
No technical changes in between as declared by
the manufacturer except for:
- Check and update certificate validity of critical
components and,
- Additio nal tests and evaluation per the new
standard edition requirement. Testing location:
TÜ V Rheinland Korea Ltd.
Young City, N - Tower, 25, Mullae - ro 28 - gil,
Yeongdeungpo - gu, Seoul #07298 Korea, Rep . of
Additional test and evaluation:

- Cl.5.2 Classification of electrical energy sources
- Cl. 6.2.2 Electrical Power Source (PS)
measurements for classification
- Annex B.2.5 Input test
- Annex B.3, B.4 Abnormal operating and fault
condition tests
- Annex E Test conditions for equipment containing
audio amplifiers
- Annex T.8 Stress relief test

Summary of compliance with National Differences (List of countries addressed):
- EU Group Differences

The product fulfils the requirements of EN 62368 - 1:2014/A11:2017 and EN IEC 62368 -
1:2020+A11:2020 .

Page 5 of 88 Report No. : 60404489 001


TR F No. IEC62368_1 C

Copy of marking plate :
The artwork below may be only a draft. The use of certification marks on a product must be
authorized by the respective NCBs that own these marks.

Page 6 of 88 Report No. : 60404489 001


TR F No. IEC62368_1 C

T est item particulars :
CAR AUDIO
Product group ................................ ..................... : end pr oduct built - in component
Classification of use by ................................ ....... : Ordinary person Children likely present
Instructed person
Skilled person
Supply c onnection ................................ ............... : AC mains DC mains
not mains connected :
ES1 ES2 ES3
Supply t olerance ................................ ................. : +10%/ - 10%
+20%/ - 15%
+ %/ - %
None
Supply c onnection – t ype ................................ .. : pluggable equipment type A -
non - detachable supply cord
appliance coupler
direct plug - in
pluggable equipment type B -
non - detachable supply cord
appliance coupler
permanent connection
mating connector other: PS3,ES1 (EV battery)
Considered current rating of protective device
................................ ................................ ............ : A;
Location: building equipment
N/A
Equipment mobility ................................ .......... : movable hand - held transportable
direct plug - in stationary for building - in
wall /c eiling - mounted SRME/rack - mounted
other:
Overvoltage c ategory (OVC) ........................... : OVC I OVC II OVC III
OVC IV other: EV battery
Class of equipment ................................ .......... : Class I Class II Class III
Not classif ied
Special installation location ........................... : N/A restricted access area
outdoor location
Pollution degree (PD) ................................ ...... :
PD 1 PD 2 PD 3
Manufacturer’s specified T
ma ........................... :
70 °C Outdoor: minimum °C
IP protection class ................................ ........... :
IPX0 IP___
Power s ystems ................................ ................. : TN TT IT - V
L - L
not AC mains
Altitude during operation (m) ......................... :
2000 m or less 5000 m
Altitude of test laboratory (m) ........................ :
2000 m or less m
Mass of equipment (kg) ................................ ... : 1. 5 5 kg

Page 7 of 88 Report No. : 60404489 001


TR F No. IEC62368_1 C

P ossible test case verdicts :

- test case does not apply to the test object .... :
N/A
- test object does meet the requirement ........... :
P (Pass)
- test object does not meet the req uirement .... :
F (Fail)
T esting :

Date of receipt of test item ................................ . :
27.07 .2020
Date (s) of performance of tests ........................ :
1 8 .0 8 .2020 to 1 9 .0 8 .2020

General remarks:
"(See Enclosure #)" refers to additional information appended to the report.
"(See appended table)" refers to a table appended to the report.

Throughout this report a comma / point is used as the decimal separator.

Manufacturer’s Declaration per sub - clause 4.2.5 of IECEE 02:
The application for obtaining a CB Test Certificate
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory
has been provided ................................ ................ : Yes
Not applicable

When differences exist ; they shall be identified in the General product information section.

Page 8 of 88 Report No. : 60404489 001


TR F No. IEC62368_1 C
Name and address of factory (ies) ................. :
Factory #1. LG Electronics Vietnam Hai Phong Co., Ltd.
Lot CN2, Trang Due Industrial Park, Le Loi Com mune, An Duong District, Hai Phong City,
Vietnam
Factory #2. LG INNOTEK YANTAI CO., LTD.
No. 36, Taibei North Road, Development Zone, Yantai 264006 Shandong P.R. China
Factory #3. LG Electronics Mława Sp. z o.o.
ul. LG Electronics 7 06 - 500 Mława Poland
Fac tory #4. LG Electronics Inc.
222, LG - ro, Jinwi - myeon Pyeongtaek - si, Gyeonggi - do 17709 Republic of Korea
Factory #5. LG Electronics(Kunshan) Co., Ltd.
No. 88, Qianjin East Road, Kunshan City 215300 Jiangsu P.R. China
Factory #6. LG ELECTRONICS DO BRASIL LTD A
LG - FILIAL MANAUS RUA JAVARI 1004 DISTRITO INDUSTRIAL MANAUS - AM, 69075 - 110,
Brazil
Factory #7. LG Electronics Nanjing Vehicle Component Co., Ltd.
No.346, Yaoxinda Road, Nanjing Economic and Technological Development Zone, 210038,
P.R. China
Factory #8 . Hitachi - LG Data Storage(Huizhou), Ltd.
Huifeng Fourth Road 42, Zhongkai Hi - Tech Industry Development Zone, Huizhou, Guangdong,
516006 P.R. China
Factory #9. HITACHI ELECTRONIC PRODUCTS (M) SDN. BHD
No. 12, Jalan Kemajuan, Bangi Industrial Estate, 43650 B andar Baru Bangi,
Selangor Darul Ehsan, Malaysia

Page 9 of 88 Report No. : 60404489 001


TR F No. IEC62368_1 C

General product information and other remarks:

This product(CAR AUDIO) is a building - in type as component which has Bluetooth, Radio and DAB
functions.
It is Class III equipment supplied by a 12 V EV b attery.
It is intended to be built in a vehicle by an instructed person or skilled person as service person and user’s
manual shall be provided in the end equipment.
The Model L6 2VW 2 is basic model and the model MIB2GP is identical to the basic model excep t for model
designation . It does not affect to safety factor.
The maximum ambient temperature permitted by the manufacturer (Tma): 70 o
C
This report is for standard up - date from IEC 60065:2014 to IEC 62368 - 1:2018 by earlier test report No.
50040905 001, 50 040905 002 and 50040905 003 with the certificate No. JPTUV - 071622,
JPTUV - 071622 - M1 and JPTUV - 071622 - M2.
The samples submitted for evaluation are representative of the final product and have the same quality in
items of safety aspect from each factory.
Whe n installing, all the requirements of IEC 62368 - 1 must be fulfilled.

Page 10 of 88 Report No. : 60404489 001


TR F No. IEC62368_1 C

OVERVIEW OF ENERGY SOURCES AND SAFEGUARDS
Clause Possible Hazard
5 Electrically - caused injury
Class and Energy Source
(e.g. ES3: Primary circuit) Body Part
(e.g. Ordinary) Safeguar ds
B S R
ES1: All parts Ordinary N/A N/A N/A
6 Electrically - caused fire
Class and Energy Source
(e.g. PS2: 100 Watt circuit) Material part
(e.g. Printed board ) Safeguards
B 1 st
S 2 nd
S
PS3: > 100 Watt circuit PCB and combustible
materials within the metallic
enclosure and
mains parts See clause
6.3.1 Control fire
spread,
Min V - 1,
PCB ,
connector
V - 1 See clause
6.4.1
Fire
enclosure is
provided
PS2: > PS1, ≤ 100 W att circuit PCB and combustible
materials i n monitor ,
Keyboard circuits See clause
6.3.1 See clause
6.4.5.2 N/A
7 Injury caused by hazardous substances
Class and Energy Source
(e.g. Ozone) Body Part
(e.g., Skilled) Safeguards
B S R
N/A N/A N/A N/A N/A
8 Mechanically - caused injury
Class and Energy Source
(e.g. MS3: Plastic fan blades) Body Part
(e.g. Ordinary) Safeguards
B S R
MS1: Sharp edges and corners Ordinary N/A N/A N/A
MS1: Equipment mass Ordinary N/A N/A N/A
9 Therm al burn
Class and Energy Source
(e.g. TS1: Keyboard caps) Body Part
(e.g., Ordinary) Safeguards
B S R
TS1:Monitor enclosure Ordinary N/A N/A N/A
TS1:Screen surface Ordinary N/A N/A N/A
TS1:Keyboard enclosure Ordinary N/A N/A N/A

Page 11 of 88 Report No. : 60404489 001


TR F No. IEC62368_1 C

10 Radiation
Cla ss and Energy Source
(e.g. RS1: PMP sound output) Body Part
(e.g., Ordinary) Safeguards
B S R
RS1:Indicating lights Ordinary N/A N/A N/A
Supplementary Information:
“B” – Basic Safeguard; “S” – Supplementary Safeguard; “R” – Reinforced Safeguard