2020 Seat Ibiza Directive 2014/53/EU Bluetooth

Page 18 of 88 Report No. : 60404490 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
5.4.11.1 Exceptions to separation between external circuits
and earth N/A
5.4.11.2 Requirements N/A
SPDs bridge separation between external circuit
and earth N/A
Rated operating voltage U
op (V) ............................. :

Nominal voltage U
peak (V) ................................ ....... :


Max increase due to variation  U
sp ........................ :


Max increase due to ageing  U
sa ......................... :

5.4.11.3 Test method and compliance ................................ : N/A
5.4.12 Insulating liquid N/A
5.4.12.1 General requirements N/A
5.4.12.2 Electric stren gth of an insulating liquid .................. : N/A
5.4.12.3 Compatibility of an insulating liquid ....................... : N/A
5.4.12.4 Container for insulating liquid ................................ : N/A
5.5 Components as safeguards
N/A
5.5.1 General N/A
5.5.2 Capacitors and RC units No such component N/A
5.5.2.1 G eneral requirement N/A
5.5.2.2 Safeguards against capacitor discharge after
disconnection of a connector ................................ . : N/A
5.5.3 Transformers No transformers N/A
5.5.4 Optocouplers No o ptocouplers N/A
5.5.5 Relays No Relays N/A
5.5.6 Resistors No Resistors N/A
5.5.7 SPDs No SPDs N/A
5.5.8 Insulation between the mains and an external
circuit consisting of a coaxial cable ....................... : N/A
5.5.9 Safeguards for socket - outlets in outdoor equipment N/A
RCD rated residual operating current (mA) ........... :

5.6 Protective conduct or
N/A
5.6.2 Requirement for protective conductors N/A
5.6 Protective conductor
N/A
5.6.2 Requirement for protective conductors N/A

Page 19 of 88 Report No. : 60404490 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
5.6.2.1 General requirements N/A
5.6.2.2 Colour of insulation N/A
5.6.3 Requirement for protective earthing conduc tors N/A
Protective earthing conductor size (mm 2
) .............. :

Protective earthing conductor serving as a
reinforced safeguard N/A
Protective earthing conductor serving as a double
safeguard N/A
5.6.4 Requirements for protective bonding conductors N/A
5.6.4.1 Protective bonding conductors N/A
Protective bonding conductor size (mm 2
). .............. :

5.6.4.2 Protective current rating (A) ................................ .... : N/A
5.6.5 Terminals for protective conductors N/A
5.6.5.1 Terminal size for connecting protective earthing
conductors ( mm) ................................ .................... : N/A
Terminal size for connecting protective bonding
conductors (mm) ................................ ....................... : N/A
5.6.5.2 Corrosion N/A
5.6.6 Resistance of the protective bonding system N/A
5.6.6.1 Requirements N/A
5.6.6.2 Test Method ................................ ........................... : N/A
5.6.6.3
R esistance (  ) or voltage dr op .............................. : N/A
5.6.7 Reliable connection of a protective earthing
conductor N/A
5.6.8 Functional earthing N/A
Conductor size (mm 2
) ................................ ............. : N/A
Class II with functional earthing marking .............. : N/A
Appliance inlet cl & cr (mm) ................................ ... : N/A
5.7 Prospective touch volt age, touch current and protective conductor current
N/A
5.7.2 Measuring devices and networks N/A
5.7.2.1 Measurement of touch current N/A
5.7.2.2 Measurement of voltage N/A
5.7.3 Equipment set - up, supply connections and earth
connections N/A
5.7.4 Unearthed accessible parts ................................ ... : N/A

Page 20 of 88 Report No. : 60404490 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
5.7.5 Earthed accessible conductive parts ..................... : N/A
5.7.6 Requirements when touch current exceeds ES2
limits N/A
Protective conductor current (mA) ......................... : N/A
Instructional Safeguard ................................ .......... : N/A
5.7.7 Prospective touch voltage and touch current
associated with external circuits N/A
5.7.7.1 Touch current from coaxial cables N/A
5.7.7.2 Prospective touch voltage and touch current
associated with paired conductor cables N/A
5.7.8 Summation of touch currents from external circ uits N/A
a) Equipment connected to earthed external
circuits, current (mA) ................................ ............. : N/A
b) Equipment connected to unearthed external
circuits, current (mA) ................................ ............. : N/A
5.8 Backfeed safeguard in battery backed up supplies
N/ A
Mains terminal ES ................................ ..................... : No battery bac ked up supplies N/ A
Air gap (mm) ................................ .............................. : N/ A

6 ELECTRICALLY - CAUSED FIRE
P
6.2 Classification of PS and PIS
P
6.2.2 Power source circuit classifications .......................... : (See appended table 6.2.2) P
6.2.3 Classification of potential ignition sources P
6.2.3.1 Arcing PIS ................................ ................................ : Open circuit voltage does not
exceed 50 V N/A
6.2.3.2 Resistive PIS ................................ ............................ : (See appended table 6.2.3.2) P
6.3 Safeguards against fire under normal operating and abnormal operating
conditions P
6.3.1 No ignition and attainable temperature value less
than 90 % defined by ISO 871 or less than 300  C
for unknown materials ................................ ........... : No ignition and no such
temperature attained within
the equipment P
Combustible materials outside fire enclosure .......... : Min. HB P
6.4 Safeguards against fire under single fault conditi ons
P
6.4.1 Safeguard method Control fire spread P
6.4.2 Reduction of the likelihood of ignition under single
fault conditions in PS1 circuits N/A

Page 21 of 88 Report No. : 60404490 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
6.4.3 Reduction of the likelihood of ignition under single
fault conditions in PS2 and PS3 circuits N/A
6.4.3.1 Supplementary safeguards N/A
6.4.3.2 Single Fault Conditions ................................ .......... : N/A
Special conditions for temperature limited by fuse N/A
6.4.4 Control of fire spread in PS1 circuits P
6.4.5 Control of fire spread in PS2 circuits P
6.4.5.2 Supplementa ry safeguards For conductor and devices are
mounted on printed board
made of Min. V - 1.
Other components in PS2 are
mounted on printed board
made of Min. V - 1 and PVC
wire used .
Not ignite during single fault
condition . P
6.4.6 Control of fire spread in PS3 circuits Provided Metallic enclosure P
6.4.7 Separation of combustible materials from a PIS P
6.4.7.2 Separation by distance N/A
6.4.7.3 Separation by a fire barrier P
6.4.8 Fire enclosures and fire barriers P
6.4.8.2 Fire enclosure and fire bar rier material properties P
6.4.8.2.1 Requirements for a fire barrier V - 0 class material or metal,
Printed board made of V - 0 P
6.4.8.2.2 Requirements for a fire enclosure Metallic enclosure provided P
6.4.8.3 Constructional requirements fo r a fire enclosure
and a fire barrier P
6.4.8.3.1 Fire enclosure and fire barrier openings P
6.4.8.3.2 Fire barrier dimensions P
6.4.8.3.3 Top openings and properties E quipment for building - in ,
e valuation shall be considered
in the end product N/A
Openings dimensions (mm) ................................ ... : N/A
6.4.8.3.4 Bottom openings and properties E quipment for building - in ,
e valuation shall be considered
in the end product N/A
Openings dimensions (mm) ................................ ... : N/A
Flammability tests for the bottom of a fire enclosure N/A

Page 22 of 88 Report No. : 60404490 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
Inst ructional Safeguard ................................ ............. : N/A
6.4.8.3.5 Side openings and properties E quipment for building - in ,
e valuation shall be considered
in the end product N/A
Openings dimensions (mm) ................................ ... : N/A
6.4.8.3.6 Integrity of a fire enclosure, condition met: a), b) or
c) ................................ ................................ ............ : N ot such fire enclosure N/A
6.4.8.4 Separation of a PIS from a fire enclosure and a fire
barrier distance (mm) or flammability rating .......... : Not such fire enclosure P
6.4.9 Flammability of insulating liquid ............................... : N/A
6.5 Internal and external wiring
P
6.5.1 Ge neral requirements P
6.5.2 Requirements for interconnection to building wiring
................................ ................................ ............... : No such interconnection to
building wiring N/A
6.5.3 Internal wiring size (mm 2
) for socket - outlets .......... : N/A
6.6 Safeguards against fire due to the connection to additional equipment
P

7 INJURY CAUSED BY HAZARDOUS SUBSTANCES
N/A
7.2 Reduction of exposure to hazardous substances
N/A
7.3 Ozone exposure
N/A
7.4 Use of personal safeguards or personal protective equipment (PPE)
N/A
Personal safeguards and instructions ................... :

7.5 Use of instructional safeguards and instructions
N/A
Instructional safeguard (ISO 7010) ........................ :

7.6 Batteries and their protection circuits
N/A

8 MECHANICALLY - CAUSED INJURY
P
8.2 Mechanical energy source classifications
P
8.3 Safeguards against mechanical energy sources
P
8.4 Safeguards against parts with sharp edges and corners
P
8.4.1 Safeguards All edges and corners are
rounded or smoothed P
Instructional Safeguard ................................ ............. : MS1 N/A
8.4.2 Sharp edges or corners P
8.5 Safeguards against moving parts
N/A

Page 23 of 88 Report No. : 60404490 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
8.5.1 Fingers, jewellery, clothing, hair, etc., contact with
MS2 or MS3 parts N/A
MS2 or MS3 part required to be accessible for the
function of the equipment N/A
Moving MS3 parts only accessible to skilled person N/A
8.5.2 Instruction al safeguard ................................ .............. : N/A
8.5.4 Special categories of equipment containing moving
parts N/A
8.5.4.1 General N/A
8.5.4.2 Equipment containing work cells with MS3 parts N/A
8.5.4.2.1 Protection of persons in the work cell N/A
8.5.4.2.2 Access protection o verride N/A
8.5.4.2.2.1 Override system
N/A
8.5.4.2.2.2 Visual indicator
N/A
8.5.4.2.3 Emergency stop system
N/A
Maximum stopping distance from the point of
activation (m) ................................ ............................. : N/A
Space between end point and nearest fixed
mechanical part (mm) ................................ ............... : N/A
8.5.4.2.4 Endurance requirements N/A
Mechanical system subjected to 100 000 cycles of
operation N/A
- Mechanical function check and visual inspection N/A
- Cable assembly ................................ ...................... : N/A
8.5.4.3 Equipment having electromechanical device for
destruct ion of media N/A
8.5.4.3.1 Equipment safeguards N/A
8.5.4.3.2 Instructional safeguards against moving parts ........ : N/A
8.5.4.3.3 Disconnection from the supply N/A
8.5.4.3.4 Cut type and test force (N) ................................ ........ : N/A
8.5.4.3.5 Compliance N/A
8.5.5 High press ure lamps No High pressure lamps N/A
Explosion test ................................ ............................ : N/A
8.5.5.3 Glass particles dimensions (mm) ............................. : N/A
8.6 Stability of equipment
N/A

Page 24 of 88 Report No. : 60404490 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
8.6.1 General Built - in equipment N/A
Instructional safeguard ................................ .............. : N/A
8.6.2 Static stability N/A
8.6.2.2 Sta tic stability test ................................ ..................... : N/A
8.6.2.3 Downward force test N/A
8.6.3 Relocation stability N/A
Wheels diameter (mm) ................................ ............. :

Tilt test N/A
8.6.4 Glass slide test N/A
8.6.5 Horizontal force test ................................ .................. : N/A
8.7 Equipment mounted to wall, ceiling or other str ucture
N/A
8.7.1 Mount means type ................................ .................... : Built - in equipment N/A
8.7.2 Test methods N/A
Test 1, additional downwards force (N) .................... : N/A
Test 2, number of attachment points and test force
(N) ................................ ................................ .............. : N/A
Test 3 Nominal diameter (mm) and applied torque
(Nm) ................................ ................................ ........... : N /A
8.8 Handles strength
N/A
8.8.1 General No such part N/A
8.8.2 Handle strength test N/A
Number of handles ................................ .................... :

Force applied (N) ................................ ...................... :

8.9 Wheels or casters attachment requirements
N/A
8.9.2 Pull test No wheels or casters N/A
8.10 Carts, sta nds and similar carriers
N/A
8.10.1 General Built - in equipment N/A
8.10.2 Marking and instructions ................................ ........... : N/A
8.10.3 Cart, stand or carrier loading test N/A
Loading force applied (N) ................................ ......... : N/A
8.10.4 Cart, stand or carrier impact test N/A
8.10.5 Mechan ical stability N/A
Force applied (N) ................................ ...................... :


Page 25 of 88 Report No. : 60404490 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
8.10.6 Thermoplastic temperature stability N/A
8.11 Mounting means for slide - rail mounted equipment (SRME)
N/A
8.11.1 General N/A
8.11.2 Requirements for slide rails N/A
Instructional Safeguard ................................ ............. : N/A
8.11.3 Mechanical strength test N/A
8.11.3.1 Downward force test, force (N) applied .................... : N/A
8.11.3.2 Lateral push force test N/A
8.11.3.3 Integrity of slide rail end stops N/A
8.11.4 Compliance N/A
8.12 Telescoping or rod antennas
N/A
Button/bal l diameter (mm) ................................ ........ :


9 THERMAL BURN INJURY
P
9.2 Thermal energy source classifications
P
9.3 Touch temperature limits
P
9.3.1 Touch temperatures of accessible parts .................. : (See appended table 9.3 ) P
9.3.2 Test method and compliance P
9.4 Safeguards agai nst thermal energy sources
N/A
9.5 Requirements for safeguards
N/A
9.5.1 Equipment safeguard N/A
9.5.2 Instructional safeguard ................................ .............. : N/A
9.6 Requirements for wireless power transmitters
N/A
9.6.1 General N/A
9.6.2 Specification of the foreign objects N/A
9.6.3 Test method and compliance ................................ ... : N/A

10 RADIATION
P
10.2 Radiation energy source classification
P
10.2.1 General classification P
Lasers ................................ ................................ .... :
