2018 KIA STONIC Owners Manual

-While driving on a curve, the FCA may
recognize the vehicle in front in the
next lane. Pay great caution, and, if necessary, depress the brake pedal.
Or, depress the accelerator pedal to
maintain the driving speed. Always,
take a look around the vehicle for
your safety.- Driving on a slope
The FCA performance decreases
while driving upward or downward on
a slope, not recognizing the vehicle in front in the same lane. It may unnec‐
essarily produce the warning mes‐
sage and the warning alarm, or it
may not produce the warning mes‐
sage and the warning alarm at all.
When the FCA suddenly recognizes the vehicle in front while passing over
a slope, you may experience sharp
deceleration.
Always keep your eyes forward while
driving upward or downward on a
slope, and, if necessary, depress the brake pedal.- Changing lanes
Even though the vehicle in the next
lane enters into your lane, it may not
be recognized by the FCA, until it en‐ ters the FCA sensing range.
Especially when the vehicle in the
next lane abruptly enters into your
lane, it is more likely not be recog‐
nized. Always pay great attention.

6-59
6
Driving your vehicle

-When the stopped vehicle in front
gets out of the lane, it may not be
recognized by your FCA. Always pay great attention.
- Recognizing the vehicle
When the vehicle in front has heavy
loading extended rearward, or when
the vehicle in front has higher ground clearance, it may induce a hazardous
situation.
Recognizing pedestrians
- The pedestrian is not fully captured
by the camera sensor, or the pedes‐
trian does not walk in the upright po‐ sition.
- The pedestrian moves very fast.
- The pedestrian abruptly appears in
front.
- The pedestrian wears clothes in the
color similar to the background.
- The outside is too bright or too dark.
- The vehicle drives at night or in the
darkness.
- There is an item similar to a person’s
body structure.
- The pedestrian is small.
- The pedestrian has impaired mobility.
- It is difficult to distinguish the pedes‐
trian from the surroundings.
- The sensor recognition is limited. -
There is a group of pedestrians.
WARNING
•Cancel the FCA in the User Set‐tings on the LCD display, beforetowing another vehicle. While tow‐ing, the brake application may ad‐versely affect your vehicle safety.
•Pay great caution to the vehicle infront, when it has heavy loadingextended rearward, or when it hashigher ground clearance.
•The sensor only detects pedes‐trian, not carts, bicycles, motorcy‐cles, luggage bags, or strollers.
•The FCA does not operate in a cer‐tain situation. Thus, never test-operate the FCA against a personor an object. It may cause a severeinjury or even death.
•When reinstalling the windshield orLane Departure Warning (LDW)camera after replacement or re‐moval, have the vehicle inspectedby a professional workshop. Kiarecommends to visit an authorizedKia dealer/service partner.
Driving your vehicle

6-60

NOTICE
The system may temporarily cancel
due to the strong electric waves.

6-61
6
Driving your vehicle

LANE DEPARTURE WARNING (LDW) SYSTEM (IF EQUIPPED)
0:#%
This system detects the lane with the
sensor at the front windshield and warns you when your vehicle leaves the
lane.
WARNING
•The Lane Departure Warning(LDW) System does not make thevehicle change lanes. It is the driv‐er's responsibility to always checkthe road conditions.
(Continued)
(Continued)
•Do not turn the steering wheelsuddenly, when the Lane Depar‐ture Warning (LDW) System warnsyou that your vehicle is leaving thelane.
•If the sensor can not detect thelane or if the vehicle speed doesnot exceed 60km/h, the Lane De‐parture Warning (LDW) Systemwon't warn you even though thevehicle leaves the lane.
•If your vehicle has window tint orother types of coating and acces‐sory on the front windshield, theLane Departure Warning (LDW)System may not work properly.
•Do not let water or any kind of liq‐uid come in contact with the LaneDeparture Warning (LDW) Systemsensor.
•Do not remove the Lane DepartureWarning (LDW) System parts anddo not affect the sensor by astrong impact.
•Do not put objects that reflectlight on the dash board.
(Continued)
Driving your vehicle
6-62

(Continued)
•Always check road conditions be‐cause you may not hear the warn‐ing chime because of audio and ex‐ternal conditions.
To operate the Lane Departure Warning
(LDW) System, press the switch with the ignition in the ON position. The indi‐
cator illuminates white on the cluster.
To cancel the Lane Departure Warning
(LDW) System, press Lane Departure Warning (LDW) System button again.
The indicator on the cluster will go off.
If you select trip display, the Lane De‐
parture Warning (LDW) System mode on the LCD display will appear.
If your vehicle leaves the lane when the
Lane Departure Warning (LDW) System
is operating and vehicle speed exceeds
60 km/h, the warning operates as fol‐
lows:
¥
-FGU
MBOF
EFQBSUVSF
XBSOJOH
¥
3JHIU
MBOF
EFQBSUVSF
XBSOJOH
1. Visual warning If you leave a lane, the lane you
cross will blink (yellow) and Lane
Departure Warning (LDW) System
indicator will blink green on LCD
during max 3 seconds.

6-63
6
Driving your vehicle

2. Auditory warningIf you leave the lane, the warning
sound operates for maximum
3 seconds.
The color of symbol will change de‐
pend on the condition of Lane De‐
parture Warning (LDW) System
system.
• White
color: When you activate the lane
departure warning system
by pressing the Lane Depar‐
ture Warning (LDW) System
button, system operating
conditions are not satisfiedor the sensor does not de‐tect the lane line.
• Green
color: When you activate the lane
departure warning system
by pressing the Lane Depar‐
ture Warning (LDW) System
button, system operating
conditions are satisfied andthe sensor detect the laneline.
• Yellow
color: When there is a malfunction
with the lane departurewarning system.Warning indicator
0:#-
When the Lane Departure Warning
(LDW) System is not working properly, the warning light will illuminate and the
warning message will come on for a
few second. After the message disap‐ pears, the master warning light will illu‐
minate.
In this case, have the system checked
by a professional workshop.
Kia recommends to visit an authorized Kia dealer/service partner.
The Lane Departure Warning
(LDW) System does not operate
when:
• The driver turns on the turn signal or the hazard warning flasher to change
lane.
• Driving on the lane line.
NOTICE
To change lanes, operate the turn
signal switch, then change the lane.
The Lane Departure Warning
(LDW) System may not warn
you even if the vehicle leaves
the lane, or may warn you even
if the vehicle does not leave the
lane when:
• The lane is not visible due to snow, rain, stain, a puddle or many other
things.
• The brightness of the outside changes suddenly.
• The headlights are off at night or in a tunnel.
Driving your vehicle
6-64

• The color of the lane marking fromthe road is difficult to distinguish.
• Driving on a steep grade or a curve.
• Light reflects from the water on the road.
• The lens or windshield is stained with foreign matter.
• The sensor can not detect the lane because of fog, heavy rain or heavy
snow.
• The surrounding temperature of the inside rear view mirror is high due to
a direct ray of light.
• The lane is very wide or narrow.
• The lane line is damaged or indistinct.
• The shadow is on the lane line by a median strip.
• There is a mark similar to a lane line.
• There is a boundary structure.
• The distance from vehicle ahead is very short or the vehicle ahead hides
the lane line.
• The vehicle shakes heavily.
• The lane number increases or decrea‐ ses or the lane lines are crossing
complicatedly.
• Putting something on the dashboard. • Driving with the sun in front of you.
• Driving in areas under construction.
• The lane line is more than two in ei‐
ther side (Left/Right).
• The windshield is fogged by humid air in the vehicle.
• The driver turns the wiper switch to HI mode.

6-65
6
Driving your vehicle

DRIVER ATTENTION WARNING (DAW) SYSTEM (IF EQUIPPED)
The Driver Attention Warning (DAW)
system displays the condition of the
driver's fatigue level and inattentive driving practices.
System setting and activation
System setting
• The Driver Attention Warning system is set to be in the OFF position, when
your vehicle is first delivered to you from the factory.
• To turn ON the Driver Attention Warning system, turn on the engine,
and then select 'User Settings
Driving Assist Driver Attention
Warning Normal/Early' on the LCD
display.
• The driver can select the Driver At‐ tention Warning system mode.- Off: The Driver Attention Warning system is deactivated.
- Normal: The Driver Attention Warning system alerts the driver
of his/her fatigue level or inatten‐
tive driving practices.
- Early: The Driver Attention Warn‐ ing system alerts the driver of
his/her fatigue level or inattentive
driving practices faster than Nor‐mal mode. • The set-up of the Driver Attention
Warning system will be maintained,as selected, when the engine is re‐
started.
Display of the driver's attention
level
0:#-
4ZTUFN
PGG
0:#-
"UUFOUJWF
ESJWJOH
0:#-
*OBUUFOUJWF
ESJWJOH
• The driver can monitor their driving conditions on the LCD display.
The DAW screen will appear when
you select the ASSIST mode tab (
)
on the LCD display if the system is
activated. (For more information, re‐
fer to L