2017 MITSUBISHI SHOGUN Owner's Manual (in English)

6. Fold down the stands (F).
7. Refit the luggage floor board.
To replace
1. Remove the luggage floor board. And
then raise the stands.
2. Raise the seat forward until you hear a
“click” and the seat locks securely.
3. Push knob (A) forward, and raise the
seatback until it locks securely into
place. After the operation, push lightly on the seatback to confirm that it has ac-
tually been secured.
4. Refit the luggage floor board and head
restraints.
Removing the third seat
E00404201220
To create more luggage space, you can re-
move the third seat.
CAUTIONl For safety, do not allow children to remove
or refit the seat.CAUTIONl Be careful not to trap your hands or feet
when removing or refitting the seat. Also, be careful not to drop or trip over the seat. If
necessary, have someone help you remove
it.
To remove
1. Remove the head restraints.
Refer to “Head restraints” on page 4-12.
2. Pull up the knob (A) on the side of the
seatback, then tilt the seatback forward.
Making a luggage area
4-17OVWX17E1Seat and seat belts4

3.Push lever (B) forward, then tilt the seat-
back forward until the seatback touches
the seat cushion.
4. Pull the seat lock lever (C).
5. Fold the stands (D) towards you from
the seat side, while lifting the front end
of the seat.
6. Put down the front end of the seat to the
floor. In this situation, the seat locking system is unlocked automatically.
7. Remove the covers (E) by turning the
knobs (F) anticlockwise.
G- Unlock
H- Lock
Making a luggage area
4-18OVWX17E1Seat and seat belts4

8.Hold the seat as shown in the illustra-
tion, remove the seat by sliding it back- ward.CAUTIONl Do not sit or place luggage on the removed
seat. Any weight placed on the folded seatcould deform the seat mountings, preventing the seat from being locked securely onto the
floor.NOTEl During the removal procedure, ensure that
both ends of the seat are moved evenly while
the seat is being pulled out. If this procedure is not followed, the seat could catch on its securing fixtures, making it difficult to re- move.
To refit
1. Push the seat’s mounting arms into the
luggage compartment’s fixtures.
2. Confirm that the seat’s mounting arms
are secured by the hooks (A).
3. Fold the stands forward from the seat
side, while lifting the front end of the seat.
4. Refit the covers on both sides of the lug-
gage room.
5. Push the knob (B) forward, raise the
seatback until it locks securely into
place.
Making a luggage area
4-19OVWX17E1Seat and seat belts4

After the operation, push the seatback
lightly to confirm that it has actually been secured.
6. Refit the head restraints.
Making a flat seat (Except
for 3-door models equipped
with the power seat) E00404301960
By removing the head restraints and fully re-
clining the seatbacks of the seats, one large flat seat is achieved.
WARNINGl Never drive with passengers on the flat
seat. This is highly dangerous.CAUTIONl To make a flat seat, stop the vehicle in a safe
place.
l Make sure the seat is adjusted by an adult or
with adult supervision for correct and safe
operation.
l When sliding the seat, be sure not to catch
your hand or leg.
l Do not walk around on top of the seats after
they have been laid flat.
l To ensure the seats are locked securely, at-
tempt to move them back and forth.
l Do not jump on, or impact the seatbacks
heavily.
l To raise the seatback, put a hand on the seat-
back and raise slowly. Never have a child do this operation, or an unexpected accident
may result.
1. If your vehicle is equipped with a rear
shelf (3-door models) / cargo area cover
(5-door models), remove it before per- forming the following steps. Refer to“Rear shelf (3-door models)” on page
7-86 and “Cargo area cover (5-door mod-
els)” on page 7-86.
2. Remove the head restraints from the
front seats.
If your vehicle is equipped with the third seat (5-door models), store the third seat into the luggage floor box.
Refer to “Head restraints” on page 4-12
and “Storage of the third seat” on page
4-15.
3. Slide the front seats fully forward, then
tip their seatbacks backward.
On 5-door models, slide the front seats backward until their seatbacks touch the second seat.
Making a flat seat (Except for 3-door models equipped with the power seat)
4-20OVWX17E1Seat and seat belts4

Refer to “To adjust forward or back-
ward” on page 4-05 and “To recline the
seatback” on page 4-06.
4. On 3-door models, remove the head re-
straints from the rear seat.
Recline the rear (3-door models) / sec-
ond (5-door models) seatback backward.
Refer to “To recline the seatback” on page 4-10.
NOTEl On 5-door models, each of the second seat’s
sidebacks (A) is foldable. When either side
of the seatback is reclined to a new position, its sideback automatically folds inward ac-
cordingly.
5. On 3-door models, store the front head
restraints and rear centre head restraint
between the front seats.
And store the rear outboard head re- straints on the side of the rear seat.
On 5-door models, store the front head restraints between the front seats.
The flat seat configuration is now com-
plete.
Reverse the above procedure when re-
turning the seat to the normal position.5-door models3-door models
Seat belts
E00404800072
To protect you and your passengers in theevent of an accident, it is most important thatthe seat belts are worn correctly while driv-
ing.

The front seat belts have a pretensioner sys- tem. These belts are used the same way as a
conventional seat belt.
Refer to “Seat belt pretensioner system and force limiter system” on page 4-25.
Seat belts
4-21OVWX17E1Seat and seat belts4

WARNINGlAlways place the shoulder belt over your
shoulder and across your chest. Never put it behind you or under your arm.
l One seat belt should be used by only one
person. Doing otherwise can be danger-
ous.
l The seat belt will provide its wearer with
maximum protection if the recliner seat- back is placed in fully upright position.
When the seatback is reclined, there is
greater risk that the passenger will slide under the belt, especially in a forward im-
pact accident, and may be injured by the
belt or by striking the instrument panel or seatbacks.
l Seat belts should always be worn by every
adult who drives or rides in this vehicle, and by all children who are tall enough towear seat belts properly.
Other children should always use proper child restraint systems.
l Remove any twists when using the belt.
l No modifications or additions should be
made by the user which will either pre- vent the seat belt adjusting devices fromoperating to remove slack, or prevent the
seat belt assembly from being adjusted to
remove slack.
l Never hold a child in your arms or on
your lap when riding in this vehicle, even
if you are wearing your seat belt. To do so risks severe or fatal injury to the child in
a collision or sudden stop.
l Always adjust the belt to a snug fit.WARNINGlAlways wear the lap portion of the belt
over your hips.3-point type seat belt (with
emergency locking mechanism)
E00404902934
This type of belt requires no length adjust- ment. Once worn, the belt adjusts itself to the
movement of the wearer, but in the event of a sudden or strong shock, the belt automatical-
ly locks to hold the wearer’s body.
NOTEl You can check if the belt locks by pulling it
forward quickly.
To fasten
1. Pull the seat belt out slowly while hold-
ing the latch plate.
NOTEl When the seat belts cannot be pulled out in a
locked condition, pull the belts once force-
fully and then return them. After that, pull
the belts out slowly once again.
2. Insert the latch plate into the buckle until
a “click” is heard.
WARNINGl Never wear the lap portion of the belt
across your abdomen. During accidents it
can press sharply against the abdomen and increase the risk of injury.
l The seat belts must not be twisted when
worn.
3. Pull the belt slightly to adjust slackness
as desired.
Seat belts
4-22OVWX17E1Seat and seat belts4

To unfasten
Hold the latch plate and push the button on
the buckle.
NOTEl As the belt retracts automatically, keep hold-
ing the latch plate while retracting so that the
belt stows slowly. Failure to do this could damage the vehicle.
l If the seat belt (A) or ring (B) becomes dirty,
the belt may not retract smoothly. If the seat belt and ring are dirty, clean them with a
mild soap or detergent solution.NOTESeat belt reminder/warning
lamp
E00409800338
The seat belt warning lamp is located on the instrument panel. A tone and warning lamp
are used to remind the driver to fasten the seat belt.
When the ignition key is turned to the “ON”
position, the warning lamp will come on and
a tone will sound for about 6 seconds. If the
driver’s seat belt remains unfastened for ap-
proximately 1 minute later, the warning lamp will flash and the tone sound intermittently
(each 12 times) when the vehicle is driven. If the driver subsequently unfastens the seat belt while driving, the warning lamp and tone
will issue further warnings. And if the seat
belt remains unfastened, the warning lamp and tone will issue further warnings each time the vehicle starts moving from a stop.
When the seat belt is fastened, the warnings
will stop.Adjustable seat belt anchor
(front seats)
E00405000286
The seat belt anchor height can be adjusted.
Seat belts
4-23OVWX17E1Seat and seat belts4

Move the seat belt anchor down with the lock
knob (A) depressed. To move the anchor up,
slide it without depressing the lock knob (A).Anchor down Anchor up
WARNINGl When adjusting the seat belt anchor, set it
at a position that is sufficiently high so
that the belt will make full contact with your shoulder but will not touch your
neck.Rear/second, third seat belt
storage*
E00405300029
When the seat belt is not in use, store it as
shown in the illustration.
3-door models5-door models Seat belt plate storage
After passing the belt through the rear notch
(A), insert the plate into the front notch (B).Seat belts
4-24OVWX17E1Seat and seat belts4 AA0064860