2012 SSANGYONG RODIUS Service Manual

06-6
Front propeller shaft
ComponentsA. Flange
B. CV joint
C. Universal joint
Rear propeller shaft
ComponentsA. Universal joint
B. Spline
C. Center bearing
D. CV joint
E. Universal joint

07-34411-01
1. SPECIFICATIONS
DescriptionSpecification
Front Suspension Rear Suspension
Suspension typeDouble wishbone Multi-link type
Spring typeCoil spring Coil spring
Shock absorber typeReciprocating cylindrical type
(gas type)Reciprocating cylindrical type
(gas type)
Stabilizer bar typeTorsion bar type Torsion bar type
2. WHEEL ALIGNMENT
Front Wheel
AlignmentToe-in2 ± 2 mm [0~4mm]
Camber0.0° ± 0.3°
Caster4.5˚ ± 0.5˚
Front Wheel
AlignmentToe-in0.4˚ ± 0.08˚
Camber0.04° ± 0.08°
Caster-

07-4
3. MAJOR CHANGES
Front Sub Frame
Old New
The engine mounting insulators (A) have been changed according to newly equipped engine
(D20DTR). It improves the durability and NVH.
Front Knuckle Assembly
Old New
The front knuckle assembly has been changed according to new 4WD system (Part-time T/C).
Hub bearingLocking hub
actuator

07-54411-01
Front Stabilizer Bar Assembly
To reduce the rolling effect of vehicle, the front stabilizer assembly has been changed.
Front Shock Absorber Assembly
To enhance the riding comfort, the coil spring rate and damping force have been changed.

07-6
(1) Shock Absorber and Coil Spring
4. DIMENSIONS OF FRONT SUSPENSION

07-74411-01
Coil Spring ▶
Description 4WD 2WD
Spring rate (kg/mm)10.01 ± 5% 10.01 ± 5%
Coil diameter (mm)16.7 16.7
Inner diameter
(mm)D 158.3 58.3
D 288.3 88.3
Spring identificationNone + Red or Blue Yellow + Red or Blue
Number of windings8.49 8.49
Number of active windings6.99
CVW (Curved
Vehicle Weight)Height (mm)256.0 256.0
Weight (kg)976.9 ± 4% 834.9 ± 4%
Stress (kg/mm)69.53 59.42
Winding directionClockwise Clockwise

07-8
Shock Absorber ▶
Fully extended length
547.0 ± 0.3 (mm)
Fully compressed
length462.0 + 0.3 (mm)
Operating distance85.0 (mm)

07-94411-01
5. DIMENSIONS OF REAR SUSPENSION
(1) Shock Absorber
Keep the suitable distance when compressed and extended.
Minimum length should be 10 mm longer than the fully compressed length. -
-
Dimension ▶
Maximum operating length Minimum operating length
Operating distance
487.0 ± 0.3 (mm) 326.0 + 0.3 (mm) 160.4 (mm)
Marking ▶
X: Part number
Y: Lot number
Ex:
3C12
12.............(Day)
3...............(Month)
2003......(Year)