2012 SSANGYONG RODIUS Service Manual

03-8
2) Circuit Diagram

04-38010-01
1. SPECIFICATIONS
1) Power, Voltage, Current
Description Specification
Rated voltage DC 12V
Operating voltage DC 9V ~ 16V
Inspection voltage DC 13.5V
Operating temperature-30˚C ~ +75˚C (while driving)
Storage temperature-40˚C ~ +85˚C
Performance guarantee voltage DC 10V ~ 15V
Dark currentbelow 3mA (12V, 25°C), Stabilized conditions (standby
mode) around 180 seconds after IGN OFF
2) LCD Display
Description Specification
Color of display Black
Color of back-light Yellow/Green
Running type 1/4 Duty, 1/3 Bias

04-4
Warning lamp/Indicator Cluster
2. LAYOUT
Meter Cluster
1. OVERVIEW
The instrument cluster for this vehicle consists of the Meter cluster and the Warning
lamp/Indicator cluster. For 2012 Model, some warning lamps and indicators have been deleted,
added, and changed according to the changes of engineering design.
Deleted: Warning lamps and indicators for EAS, EPB, and TPMS
Changed: EBD warning lamps
Added: Indicators for Part-time transfer case -
-
-

05-38310-01
1) Exterior Lamps
1. LAYOUT

05-4
(1) Front Lamps
HeadlampHeadlamp
Right fog lamp
(12V-5W)
Left fog lamp
(12V-5W)
Low beam (12V-55W)Tail lamp (12V-5W)
High beam (12V-55W)Turn signal lamp
(12V-28W)
Connector
Tail lamp
Tail lamp/Turn
signal lamp
connector
Turn signal lamp Headlamp
(Low beam) Headlamp
(High beam)
Side repeater (12V-5W)

05-58310-01
(2) Rear Lamps
High mounted stop lamp
(12V-6W)
License plate lamp
(12V-5W, 2)
Tail lamp assembly
Rear lamp
Stop lamp (12V-8W)
Rear turn signal lamp (12V-27W)
Tail lamp (12V-8W)
Stop lamp
Rear turn signal lamp or
rear fog lamp (LH only)
Tail lamp
Tail lamp assembly
connector

05-6
2) Interior Lamps

06-38510-00
1. SPECIFICATIONS
1) Multifunction Switch
2) Auto Light Sensor
Description Description
Multifunction
switchRated voltage DC 12V
Operating temperature-30℃~+80℃
Rated load Light switch ON: 1A (Relay load)
Dimmer and passing switch High beam/low beam/passing:
0.3A (Relay load)
Turn signal switch6.6±0.5A (Lamp load)
Wiper switch Low: 5A, High: 7A (Motor load)
Auto: 0.22±0.05A (Relay load)
Fixed: max. 28A (Motor load)
Washer switch 4A (Motor load)
Intermittent wiper switch max. 25 mA
Mist switch 5A (Motor load)
Description Description
Auto light sensor unit Operating voltage 9~16V
Load max. 200 mA (Relay load)
Operating temperature-30℃~+85℃
Storage temperature-40℃~+120℃
Location On the left top of instrument panel