2009 RENAULT TWINGO RS Electrical Equipment Workshop Manual

80B-13
HEADLIGHTS
Side indicator: Removal - Refitting
80B
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
aUnclip the side indicator (1) using a small flat-blade
screwdriver (2) .
aRemove the side indicator (1) from the bulb moun-
ting (3) by turning it a quarter of a turn anti-clockwi-
se.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aIf the side indicator bulb is replaced, use a W5W ap-
proved bulb.
aRefit the side indicator on the bulb mounting by tur-
ning it a quarter of a turn clockwise.
aFit the side indicator onto the front wing.
119384
121206

81A-1
REAR LIGHTING
Rear lighting: List and location of components
81A
I - LIST OF COMPONENTS
II - LOCATION OF COMPONENTS
1 - Signalling light switch
To remove the signalling light switch (see 84A, Con-
trol - Signals, Signals and lighting switch: Removal
- Refitting, page 84A-8) .2 - UCH
The UCH is located in the dashboard, above the pas-
senger compartment relay/fuse box, for removal (see
87B, Passenger compartment connection unit,
UCH: Removal - Refitting, page 87B-1) .
3 - Passenger compartment fuse and relay box No. Description
(1) Signalling light switch
(2) UCH
(3) Passenger compartment fuse and relay
box
(4) Rear light on wing
(5) High level brake light
(6) License plate light
121133
119507
119504

81A-2
REAR LIGHTING
Rear lighting: List and location of components
81A
4 - Rear light on wing
5 - High level brake light6 - License plate light
119520
119532
121082

81A-3
REAR LIGHTING
Rear wing light: Removal - Refitting
81A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aSwitch off the ignition.
II - REMOVAL OPERATION FOR PART
CONCERNED
aDisconnect the connector (1) from the rear light on
the wing.
aRemove:
-the bolt (2) from the rear light on the wing,
-the rear light on the wing,
-the rear light bulbs on the wing (see 81A, Rear li-
ghting, Rear light bulb: Removal - Refitting,
page 81A-4) .
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aRefit:
-the rear light bulbs on the wing (see 81A, Rear li-
ghting, Rear light bulb: Removal - Refitting,
page 81A-4) ,
-the rear light on the wing,
-the rear light bolt on the wing.
aConnect the connector for the rear light on the wing.
119533

81A-4
REAR LIGHTING
Rear light bulb: Removal - Refitting
81A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aSwitch off the ignition.
1 - Rear light bulbs on the wing
aRemove the rear light on the wing (see 81A, Rear li-
ghting, Rear wing light: Removal - Refitting, page
81A-3) .
2 - High level brake light bulb
aRemove the high level brake light (see 81A, Rear li-
ghting, 3rd brake light: Removal - Refitting, page
81A-6) .
3 - License plate light bulb
aRemove the license plate light (see 81A, Rear li-
ghting, Number plate light: Removal - Refitting,
page 81A-8) .
II - REMOVAL OPERATION FOR PART
CONCERNED
1 - Rear light bulbs on the wing
aUnclip the plate by pressing on the clips (1) .aRemove:
-the side light and brake light bulb (2) ,
-the indicator bulb (3) ,
-the rear fog light bulb (left rear light) or the rever-
sing light bulb (right rear light) (4) .
2 - High level brake light bulb
aRemove the high level brake light bulb (5) .
119535
119536
119534

81A-5
REAR LIGHTING
Rear light bulb: Removal - Refitting
81A
3 - License plate light bulb
aUnclip the light at (6) .
aRemove the license plate light bulb.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a
1 - Rear light bulbs on the wing
aRefit:
-the side light and brake light bulb (P21/5W),
-the indicator bulb (PY21W),
-the rear fog light bulb (left rear light) or the rever-
sing light bulb (right rear light) (P21W).
2 - High level brake light bulb
aRefit the high level brake light bulb (W16W).
3 - License plate light bulb
aRefit the license plate light bulb (W5W).II - FINAL OPERATION.
1 - Rear light bulbs on the wing
aRefit the rear light on the wing (see 81A, Rear li-
ghting, Rear wing light: Removal - Refitting, page
81A-3) .
2 - High level brake light bulb
aRefit the high level brake light (see 81A, Rear li-
ghting, 3rd brake light: Removal - Refitting, page
81A-6) .
3 - License plate light bulb
aRefit the license plate light (see 81A, Rear lighting,
Number plate light: Removal - Refitting, page
81A-8) .
121080
Note:
When replacing a bulb, only use approved bulbs.

81A-6
REAR LIGHTING
3rd brake light: Removal - Refitting
81A
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the blanking covers (1) .
aUnclip the high level brake light with a flat-blade
screwdriver by pressing on the clips (2) .
119530
119531
119534

81A-7
REAR LIGHTING
3rd brake light: Removal - Refitting
81A
aDisconnect:
-the connector (3) from the high level brake light,
-the supply pipe (4) from the rear screen washer jet.
aRemove the high level brake light (5) .
aRemove:
-the rear screen washer jet (6) (see 85A, Wiping -
Washing, Rear screen washer jet: Removal -
Refitting, page 85A-25) ,
-the high level brake light bulb (see 81A, Rear li-
ghting, Rear light bulb: Removal - Refitting,
page 81A-4) .
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aRefit:
-the high level brake light bulb (see 81A, Rear li-
ghting, Rear light bulb: Removal - Refitting,
page 81A-4) ,
-the rear screen washer jet (see 85A, Wiping -
Washing, Rear screen washer jet: Removal -
Refitting, page 85A-25) .
aConnect:
-the rear screen washer jet supply pipe,
-the high level brake light connector.
aRefit:
-the high level brake light,
-the blanking covers.
119532
119534