2007 FORD SUPER DUTY Owners Manual

Page 265 of 312

FORD SUPER DUTY 2007 1.G Owners Manual •All engines
When the engine is cold, check the level of the engine coolant in the
reservoir.
•The engine coolant should be at the “FULL COLD” level or within the
“COLD FILL RANGE” as list

Page 266 of 312

FORD SUPER DUTY 2007 1.G Owners Manual Do not add engine coolant when the engine is hot. Steam and
scalding liquids released from a hot cooling system can burn you
badly. Also, you can be burned if you spill coolant on hot engine parts.
Do

Page 267 of 312

FORD SUPER DUTY 2007 1.G Owners Manual To reduce the risk of personal injury, make sure the engine is
cool before unscrewing the coolant pressure relief cap. The
cooling system is under pressure; steam and hot liquid can come out
forcefull

Page 268 of 312

FORD SUPER DUTY 2007 1.G Owners Manual Used engine coolant should be disposed of in an appropriate
manner. Follow your community’s regulations and standards for recycling
and disposing of automotive fluids.
Coolant refill capacity
To fin

Page 269 of 312

FORD SUPER DUTY 2007 1.G Owners Manual Vehicles driven year-round in non-extreme climates should use a 50/50
mixture of engine coolant and distilled water for optimum cooling system
and engine protection.
What you should know about fail-sa

Page 270 of 312

FORD SUPER DUTY 2007 1.G Owners Manual 2. Arrange for the vehicle to be taken to a service facility.
3. If this is not possible, wait a short period for the engine to cool.
4. Check the coolant level and replenish if low.
Never remove the

Page 271 of 312

FORD SUPER DUTY 2007 1.G Owners Manual Gasoline may contain benzene, which is a cancer-causing agent.
Observe the following guidelines when handling automotive fuel:
•Extinguish all smoking materials
and any open flames before
refueling

Page 272 of 312

FORD SUPER DUTY 2007 1.G Owners Manual The flow of fuel through a fuel pump nozzle can produce static
electricity, which can cause a fire if fuel is pumped into an
ungrounded fuel container.
Use the following guidelines to avoid static bui