1997 Mercury Villager Owner's Manuals

Controls and Features
71
[CF10200(ALL)01/96]
P
[CF10300(ALL)05/96]
Push this button for airflow to the floor and windshield at the
same time. ThePindicator light illuminates, and the display
window shows the set temperature. However, the air is not
cooled below the temperature outside of the vehicle regardless
of the temperature setting unless the A/C button is pushed.
[CF10400(ALL)01/96]
V
[CF10500(ALL)01/96]
Press this button to obtain maximum airflow to the windshield.
Adjust the temperature setting as required for defrosting. The
Vindicator light illuminates and the display window shows
the set temperature. When the outside temperature is about50ÊF
(10ÊC) the air conditioning functions in order to dehumidify the
air to prevent window fogging.
[CF10600(ALL)01/96]
Q
[CF10700(ALL)05/96]
Push this button to select airflow through the instrument panel
registers. TheQindicator light illuminates and the display
window shows the set temperature. The ATC heats the air if the
selected temperature is warmer than the outside air coming into
the vehicle. However, the air is not cooled below the
temperature outside of the vehicle regardless of the temperature
setting unless the A/C button is pushed.
[CF10800(ALL)01/96]
S
[CF10900(ALL)05/96]
Push this button for air from the floor and instrument panel
registers at the same time. TheSindicator light illuminates
and the display window shows the set temperature. The ATC
heats the air if the selected temperature is warmer than the
outside air coming into the vehicle. However, the air is not
cooled below the temperature outside of the vehicle regardless
of the temperature setting unless the A/C button is pushed.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

72
[CF11000(ALL)01/96]
R
[CF11100(ALL)05/96]
Push this button to direct airflow to the floor. TheRindicator
light illuminates and the display window shows the set
temperature. The ATC heats the air if the selected temperature
is warmer than the outside air coming into the vehicle.
However, the air is not cooled below the temperature outside of
the vehicle regardless of the temperature setting unless the A/C
button is pushed.
[CF11200(ALL)01/96]
Air Conditioning and Air Recirculation
[CF11300(ALL)01/96]
Activate the air conditioning in any of the function selector
override modes by pressing the A/C button. The A/C indicator
light on the button illuminates to verify activation, and cooled
air flows from the vents. Fan speed continues to be controlled
by the ATC unless the fan speed thumbwheel is used to
override the ATC.
[CF11400(ALL)01/96]
Press theMbutton to choose air recirculation. In this mode
the ATC system recirculates the air inside the vehicle rather
than drawing air from outside. Use this mode together with the
air conditioning to rapidly cool the inside of the vehicle or to
dehumidify the air inside the vehicle.
[CF11500(ALL)01/96]
Rear Passenger Compartment Climate Control System
with Front Passenger ATC
[CF11600(ALL)01/96]
If your vehicle is equipped with ATC, the rear passenger
compartment will also have climate controls so that rear seat
occupants can select their own personal climate comfort level.
[CF11700(ALL)01/96]
The rear seat climate control system is controlled from the main
ATC system on the instrument panel. If the front ATC system is
off, the rear system will also be off. Also, if the rear seat climate
control lever is set in OFF, the rear climate controls are turned
off.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
73
[CF11800(ALL)01/96]
If the rear seat climate control lever is set in any of the fan
speed positions (1-4), air will be discharged from the rear seat
vents at the corresponding speed. Rear seat passengers can
choose airflow to be distributed out of the upper or lower vents
by using the vent selection switch on the rear climate control
panel. The air temperature from the rear climate control system
will be automatically controlled by the front ATC system. Rear
seat passengers cannot control fan speed or air temperature by
using the temperature control knobs on the rear climate control
panel.
[CF11900(ALL)01/96]
If the rear seat climate control lever is set in the REAR position,
the front ATC system will not control the rear climate control
system. Rear seat passengers can control fan speed, upper or
lower air distribution, and temperature control from the rear
system by using the rear climate controls.
[CF12000(ALL)01/96]
13-1/2 pica
art:0040079-A
Rear seat climate control system panel
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

74
*
[CF12100(ALL)01/96]
Liftgate Window Features
%*
[CF12200(ALL)01/96]
Rear Window Defogger (If equipped)
*
[CF12300(ALL)01/96]
The defogger for the rear liftgate window clears frost, fog, or
thin ice from both the inside and outside of the rear window.
The defogger operates with the ignition in the ON position.
[CF12400(ALL)01/96]
If your vehicle is equipped with heated exterior mirrors, they
activate when the rear window defogger is switched on.
*
[CF12500(ALL)03/96]
The control switch is located on the instrument panel to the
right of the steering column.
[CF12600(ALL)03/96]
13-1/2 pica art:0040073-E
Rear window defogger switch location
*
[CF12700(ALL)05/96]
Before using the defroster, clear away any snow that is on the
rear window and outside rearview mirrors. With the engine
running, push the defroster button.
*
[CF12800(ALL)01/96]
After approximately 10 minutes, the defroster will turn off. If
the window or mirrors are still not clear, turn the defroster on
again.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
75
*
[CF12900(ALL)01/96]
The defroster will turn off when the ignition key is turned to
the OFF or START position.
*
[CF13000(ALL)01/96]
Never use sharp instruments or abrasive window cleaners to
clean the inside of your rear window. If you do, you may
damage the wires that are bonded to the inside of the rear
window, and cause damage to the rear window defogger.
[CF13100(ALL)01/96]
Rear Wiper and Washer
[CF13200(ALL)01/96]
The controls for the rear wiper and washer can also be found
on the instrument panel to the right of the instrument cluster.
The rear wiper and washer controls operate with the ignition in
the ACC and ON positions.
[CF13300(ALL)01/96]
13-1/2 pica
art:0040080-D
Rear wiper and washer switch locations
[CF13400(ALL)01/96]
To turn on the rear wiper, press the RR WIPER switch. The
wiper will operate until it is turned off. The wiper will complete
one cycle every 10 to 15 seconds. To turn off the rear wiper,
press the RR WIPER switch a second time.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

76
[CF13500(ALL)01/96]
To activate the rear washer, press the RR WASH switch. For a
constant spray, hold the switch for a few seconds. For less
washer fluid, press the switch once and release it. When you
activate the washer, the wiper will cycle twice and then stop.
*
[CF13600(ALL)01/96]
Do not activate the washer for longer than fifteen seconds
continuously. This could damage the washer pump system.
%*
[CF13650(ALL)01/96]
Hazard Flasher Switch
[CF13655(ALL)03/96]
The hazard flasher switch is located on the instrument panel to
the right of the steering column. For more information, refer to
theRoadside Emergencieschapter.
[CF13700(ALL)01/96]
Interior and Exterior Lights
*
[CF13800(ALL)05/96]
To turn on the headlamps, parking lamps, marker lamps, tail
lamps, license plate lamps and instrument panel lamps, use the
headlamp knob, to the left of the instrument cluster.
*
[CF13900(ALL)05/96]1.
Turn the headlamp knob to the first position to turn on the
parking lamps, tail lamps, license plate lamps, marker lamps
and instrument panel lamps.
*
[CF13950(ALL)05/96]2.
Turn the headlamp knob to the second position to turn on
the headlamps in addition to the parking lamps, tail lamps,
license plate lamps, marker lamps and instrument panel
lamps.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
77
[CF14000(ALL)01/96]
13-1/2 pica art:0040074-E
The headlamp control knob
[CF14100(ALL)01/96]
A chime will sound if any of the exterior lamps are on when
the driver's door is opened.
%*
[CF14400(ALL)01/96]
Daytime Running Light (DRL) System
(Canadian vehicles only)
*
[CF14500(ALL)03/96]
The Daytime Running Light (DRL) system turns the high beam
headlamps on, with a reduced light output, when:
*
[CF14600(ALL)01/96]
n
the vehicle is ªrunningº
*
[CF14700(ALL)02/96]
n
the vehicle has a fully released parking brake
*
[CF14800(ALL)01/96]
n
the headlamp system is in the OFF position
*
[CF14900(ALL)01/96]
NOTE: You may notice that the lights flicker when the engine
is turned on or off. This is a normal condition.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

78
*
[CF15000(ALL)03/96]
RWARNING
The Daytime Running Light (DRL) system will not
illuminate the tail lamps and parking lamps. Turn on
your headlamps at dusk. Failure to do so may result in a
collision.
%*
[CF15100(ALL)01/96]
Lighting Up the Instrument Panel
[CF15200(ALL)01/96]
The instrument panel lights can be turned on by turning the
headlamp control knob to either the first or second position.
You can brighten or dim the instrument panel lights with the
DIM switch. The DIM switch is located near the headlamp
controls.
[CF15300(ALL)01/96]
Pushing and holding the right side of the switch will continue
to brighten the lights until the maximum brightness is reached.
Release the switch to maintain the desired brightness. The DIM
feature works similarly to dim the instrument panel lights when
the left side of the switch is pushed.
[CF15400(ALL)01/96]
7-1/2 pica art:0040076-B
The instrument panel brightness control
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996