Page 92 of 389
90
*
[CF22500(ALL)01/96]
RWARNING
Always warm up the windshield with the defroster
before you use the washer fluid. In freezing weather, the
washer solution may freeze on the windshield and
obscure your vision.
*
[CF22600(ALL)03/96]
For information about refilling the washer fluid or replacing
your windshield wiper blades, seeWindshield washer fluid and
Wipersin the Index.
%*
[CF22700(ALL)01/96]
Gearshift Lever
[CF22800(ALL)03/96]
The gearshift lever on your vehicle is mounted on the steering
column. On the end of the gearshift lever is the Overdrive
On/Off button. To learn about the operation of the gearshift
lever and the Overdrive On/Off button, see theDrivingchapter.
[CF22900(ALL)01/96]
13-1/2 pica
art:0040092-D
Gearshift lever location
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996
Page 285 of 389
288
[MC18450(ALL)01/96]
17-1/2 pica
art:0040198-B
Windshield washer fluid reservoir
%*
[MC18452(ALL)02/96
]
Use specially formulated windshield washer fluid rather than
plain water, because specially formulated washer fluids contain
additives that dissolve road grime. For safety reasons, washer
fluids containing an appropriate antifreeze such as methanol
should be used in freezing weather (temperatures below32ÊF
[0ÊC]). State or local regulations on Volatile Organic Compounds
(VOCs) may restrict use of the most common antifreeze,
methanol. Washer fluids containing non-methanol antifreeze
agents should be used only if they provide cold weather
protection without damaging the vehicle's paint finish, wiper
blades, and windshield washer system.
File:11vxmcn.ex
Update:Mon Jun 10 15:17:05 1996
Page 297 of 389
![Mercury Villager 1997 Owners Manuals 300
[MC21600(ALL)03/96]
The air filter should not be cleaned and reused. Replace it
according to the maintenance intervals shown in theMaintenance
Schedulebooklet. When replacing the filter, unclip th Mercury Villager 1997 Owners Manuals 300
[MC21600(ALL)03/96]
The air filter should not be cleaned and reused. Replace it
according to the maintenance intervals shown in theMaintenance
Schedulebooklet. When replacing the filter, unclip th](/manual-img/33/11174/w960_11174-296.png)
300
[MC21600(ALL)03/96]
The air filter should not be cleaned and reused. Replace it
according to the maintenance intervals shown in theMaintenance
Schedulebooklet. When replacing the filter, unclip the four
clamps and remove the filter. Wipe the inside of the air filter
housing with a damp cloth when replacing the filter.
*
[MC21700(ALL)01/96]
RWARNING
Never pour fuel in the throttle body or attempt to start
the engine with the air cleaner removed. Doing so could
result in fire and personal injury.
%*
[MC22300(ALL)02/96]
Wiper Blades
*
[MC22400(ALL)01/96]
Check the windshield wiper blades at least twice a year. Also
check them whenever they seem less effective than usual.
Substances such as tree sap and some hot wax treatments used
by commercial car washes reduce the effectiveness of wiper
blades.
*
[MC22500(ALL)01/96]
If the blades do not wipe properly, clean both the windshield
and the wiper blades. Use undiluted windshield washer solution
or a mild detergent. Rinse thoroughly with clear water. Do not
use fuel, kerosene, paint thinner, or other solvents to clean your
wiper blades. These will damage your blades.
*
[MC22600(ALL)01/96]
To reach the wiper blades easily, turn the ignition switch to
ACCESSORY and turn your wipers on. Wait for them to reach a
vertical position and turn the ignition to OFF. Moving the
wipers manually may damage them.
*
[MC22700(ALL)02/96]
Wiper blade replacement
*
[MC22800(ALL)01/96]
If the wipers still do not work properly after you clean them,
you may need to replace the wiper blade assembly. When
replacing the wiper blade assembly always use a Motorcraft part
or equivalent.
File:11vxmcn.ex
Update:Mon Jun 10 15:17:05 1996
Page 298 of 389
Maintenance and Care
301
*
[MC22900(ALL)08/95]
To replace the wiper blades:
*
[MC23000(ALL)01/96]1.
Pull the wiper arm away from the windshield and into the
lock position.
[MC23100(ALL)01/96]2.
Turn the blade at an angle from the wiper arm. Push the
lock pin to release the blade and pull the wiper blade down
toward the windshield to remove it from the arm.
*
[MC23200(ALL)08/95]3.
Attach a new wiper blade to the wiper arm and press it into
place until you hear it click.
[MC23300(ALL)01/96]
13-1/2 pica
art:0040235-B
Replacing the wiper blades
%*
[MC23400(ALL)01/96]
Tires
*
[MC23500(ALL)03/96]
Look at your tires each time you fill your fuel tank. If one tire
looks lower than the others, check the pressure in all of them.
Always follow these precautions:
*
[MC23600(ALL)02/96]
n
Use an accurate tire pressure gauge.
*
[MC23700(ALL)01/96]
n
Stay within the recommended load limits. SeeDriving with a
heavy loadin the Index.
File:11vxmcn.ex
Update:Mon Jun 10 15:17:05 1996
Page 388 of 389
403
Index
Windows
power windows, operating.............. 107
Windshield, washing................... 89
Windshield washer fluid and wipers
checking and replacing wiper blades......... 300
low washer fluid light................. 17
operation....................... 89
reservoir...................... 287
specifications.................... 288
variable interval wipers................ 89
Windshield wipers and washer.............. 89
Wrecker towing.................... 274
File:vxixn.ex
Update:Fri Jun 14 07:38:49 1996