02
2-13
*1 : Refer to the recommended SAE viscosity numbers.
*2 : Engine oils labeled Energy Conserving Oil are now available. Along with other additional 
benefits, they contribute to fuel economy by reducing the amount of fuel necessary 
to overcome engine friction. Often, these improvements are difficult to measure in 
everyday driving, but in a year’s time, they can offer significant cost and energy savings.
*3 : If the above recommended specification oil is not available, SAE 0W-30 grade synthetic 
oil can be used. If mineral oil or semi-synthetic oil is used, it is a severe maintenance 
condition in terms of engine oil change.
*4 : To maintain the best braking performance and ABS/ESC performance, we recommend 
that you use genuine brake fluid that conform to specifications.
*5 : If the front/rear differential is submerged, we recommend that you visit an authorized 
retailer of Genesis Branded products to replace the differential oil.
Recommended SAE Viscosity Number
 CAUTION
Always be sure to clean the area around any filler cap, drain plug, or dipstick before 
checking or draining any lubricant. This is especially important in dusty or sandy 
areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick 
areas will prevent dirt and grit from entering the engine and other mechanisms that 
could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather 
operating (engine start and engine oil flowability). Lower viscosity engine oils can 
provide better fuel economy and cold weather performance, however, higher viscosity 
engine oils are required for satisfactory lubrication in hot weather. Using oils of any 
viscosity other than those recommended could result in engine damage.
When choosing an oil, consider the range of temperature your vehicle will be operated 
in before the next oil change. Proceed to select the recommended oil viscosity from 
the chart.
Temperature Range for SAE Viscosity Numbers
Temperature °C
-30 -20-10 010 20 30 4050
(°F) -10020 40 60 80 100120
Gasoline engine oil
0W-300W-30
An engine oil displaying this API Certification Mark conforms to the international Lubricant Specification Advisory Committee 
(ILSAC). It is recommended to only use engine oils that uphold 
this API Certification Mark.