Page 441 of 632
![GENESIS GV80 2021  Owners Manual 07
7-93
OJX1070282LOJX1070282L[1] : Driving route, [2] : Branch line,
[3] : Curved road section, [4] : Main road
• If there is no destination set on the 
navigation, Highway Curve Zone Auto 
Slowdow GENESIS GV80 2021  Owners Manual 07
7-93
OJX1070282LOJX1070282L[1] : Driving route, [2] : Branch line,
[3] : Curved road section, [4] : Main road
• If there is no destination set on the 
navigation, Highway Curve Zone Auto 
Slowdow](/manual-img/46/35616/w960_35616-440.png)
07
7-93
OJX1070282LOJX1070282L[1] : Driving route, [2] : Branch line,
[3] : Curved road section, [4] : Main road
• If there is no destination set on the 
navigation, Highway Curve Zone Auto 
Slowdown function will operate based 
on the curve information on the main 
road. 
• Even if you depart from the main road, 
Highway Curve Zone Auto Slowdown 
function may temporarily operate 
due to navigation information of the 
highway curve section.
 WARNING
• Navigation-based Smart Cruise 
Control is not a substitute for safe 
driving practices, but a convenience 
function. Always have your eyes on 
the road, and it is the responsibility 
of the driver to avoid violating traffic 
laws. 
• The navigation’s speed limit 
information may differ from the 
actual speed limit information on the 
road. It is the driver's responsibility 
to check the speed limit on the 
actual driving road or lane.
• Navigation-based Smart Cruise 
Control may not operate due to the 
existence of leading vehicles and 
the driving conditions of the vehicle. 
Always pay attention to road and 
driving conditions while driving.
• When you are towing a trailer or 
another vehicle, we recommend 
that Navigation-based Smart Cruise 
Control is turned off due to safety 
reasons.
• After you pass through a tollgate on a 
highway (or motorway), Navigation-
based Smart Cruise Control will 
operate based on the first lane. If 
you enter one of the other lanes, the 
system may not operate properly.   
         
        
        
     
        
        Page 442 of 632

Driver Assistance System
7-94
• The vehicle will accelerate if the 
driver depresses the accelerator 
pedal while Navigation-based Smart 
Cruise Control is operating, and 
the system will not decelerate the 
vehicle. 
• If the driver accelerates and 
releases the accelerator pedal while 
Navigation-based Smart Cruise 
Control is operating, the vehicle may 
not decelerate sufficiently or may 
rapidly decelerate to a safe speed.
• If the curve is too large or too small, 
Navigation-based Smart Cruise 
Control may not operate.
• Navigation-based Smart Cruise 
Control will automatically be 
cancelled when you leave the 
highway (or motorway) main road. 
Always pay attention to road and 
driving conditions while driving.
 Information
• The speed information on the cluster 
and navigation may differ.
• The time gap could occur between 
the navigation’s guidance and when 
Navigation-based Smart Cruise Control 
operation starts and ends.
• Even if you are driving at a speed lower 
than Smart Cruise Control set speed, 
acceleration may be limited by the 
curve sections ahead.
• If Navigation-based Smart Cruise 
Control is operating while leaving the 
main road to enter an interchange, 
junction, rest area, etc., the system may 
operate for a certain period of time.
• Deceleration by Navigation-based 
Smart Cruise Control may feel it is not 
sufficient due to road conditions such 
as uneven road surfaces, narrow lanes, 
etc.
 Information
This device complies with Part 15 of the FCC 
rules.
Operation is subject to the following three 
conditions:
1. This device may not cause harmful 
interference, and
2. This device must accept any 
interference received, including 
interference that may cause undesired 
operation.
3. Changes or modifications not expressly 
approved by the party responsible 
for compliance could void the user's 
authority to operate the device.
 Information
Radio frequency radiation exposure 
information:
This equipment complies with FCC radiation 
exposure limits set forth for an uncontrolled 
environment.
This equipment should be installed and 
operated with minimum distance of 8 in. (20 
cm) between the radiator (antenna) and your 
body.
This transmitter must not be co-located or 
operating in conjunction with any other 
antenna or transmitter.    
         
        
        
     
        
        Page 443 of 632
07
7-95
LANE FOLLOWING ASSIST (LFA)
Lane Following Assist is designed to help 
detect lane markings and/or vehicles on 
the road, and assists the driver’s steering 
to help center the vehicle in the lane.
Detecting sensor
OJX1079178OJX1079178[1]: Front view camera
The front view camera is used as a 
detecting sensor to help detect lane 
markings and vehicles in front.
Refer to the picture above for the 
detailed location of the detecting sensor.
 CAUTION
For more details on the precautions 
of the front view camera, refer to 
“Forward Collision-Avoidance Assist 
(FCA)” section in chapter 7.
System Settings
Setting functions for the system
OJX1079096 OJX1079096 
Turning the system ON/OFF
With the Engine Start/Stop button in 
the ON position, shortly press the Lane 
Driving Assist button located on the 
steering wheel to turn on Lane Following 
Assist. The white or green 
 indicator light will illuminate on the cluster.
Press the button again to turn off the 
system.   
         
        
        
     
        
        Page 444 of 632
Driver Assistance System
7-96
OJX1079246LOJX1079246L
Warning Volume
With the Engine Start/Stop button in the 
ON position, select ‘Driver Assistance → 
Warning Volume’ from the Settings menu 
to change the Warning Volume to ‘High’, 
‘Medium’, ‘Low’ or ‘Off’ for Hands-off 
warning. 
However, even if ‘Off’ is selected, the 
Hands-off Warning Volume will not turn 
off but the volume will sound as ‘Low’.
If you change the Warning Volume, 
the Warning Volume of other Driver 
Assistance systems may change. 
System Operation
Warning and control
OJX1070100NOJX1070100N
Lane  Following Assist
If the vehicle ahead and/or both lane 
markings are detected and your vehicle 
speed is below 120 mph (200 km/h), the 
green 
 indicator light will illuminate on the cluster, and the system will help 
center the vehicle in the lane by assisting 
the steering wheel. 
 CAUTION
When the steering wheel is not assisted, 
the green  indicator light will blink and change to white.    
         
        
        
     
        
        Page 445 of 632

07
7-97
OJX1079022L OJX1079022L 
Hands-off warning
If the driver takes their hands off the 
steering wheel for several seconds, the 
‘Place hands on the steering wheel’ 
warning message will appear and an 
audible warning will sound in stages.
First stage :Warning message
Second stage : Warning message (red 
steering wheel) and 
audible warning
OJX1079097LOJX1079097L
If the driver still does not have their 
hands on the steering wheel after the 
hands-off warning, the ‘Lane Following 
Assist (LFA) canceled’ warning message 
will appear and Lane Following Assist will 
be automatically canceled.
 WARNING
• Lane Following Assist does not 
operate at all times. It is the 
responsibility of the driver to safely 
steer the vehicle and to maintain the 
vehicle in its lane. 
• The hands–off warning message 
may appear late depending on road 
conditions. Always have your hands 
on the steering wheel while driving.
• If the steering wheel is held very 
lightly the hands–off warning 
message may appear because the 
system may not recognize that the 
driver has their hands on the steering 
wheel.
• If you attach objects to the steering 
wheel, the hands-off warning may 
not work properly.   
         
        
        
     
        
        Page 446 of 632
Driver Assistance System
7-98
 Information
• For more details on setting the 
functions in the infotainment system, 
refer to “Vehicle Settings” section in 
chapter 4.
• When both lane markings are detected, 
the lane lines on the cluster will change 
from grey to white.
		 
         
        
        
     
        
        Page 447 of 632

07
7-99
HIGHWAY DRIVING ASSIST (HDA) (IF EQUIPPED)
Basic function
Highway Driving Assist is designed to 
help detect vehicles and lanes ahead, 
and help maintain distance from the 
vehicle ahead, maintain the set speed, 
and help center the vehicle in the lane 
while driving on the highway.
OADAS035OADAS035
Highway Lane Change Assist (if equipped)
Highway Lane Change Assist function 
helps change lanes to the direction the 
driver slightly moves the turn signal 
switch if the system determines that a 
lane change is possible.
OADAS036OADAS036
 Information
• Highway Driving Assist is available 
only on controlled access road of 
certain highways.
 ÃControlled access road indicates 
roads with limited entrances and exits 
that allow uninterrupted high speed 
traffic flow. Only passenger cars and 
motorcycles are allowed on controlled 
access roads.
Available highway (Controlled access road)
USA Select Interstate Highway 
and U.S. (Federal) and State  Highways
Canada Select Provincial and Territorial 
Highways
•  Additional highways may be expanded 
by future navigation updates.   
         
        
        
     
        
        Page 448 of 632
![GENESIS GV80 2021  Owners Manual Driver Assistance System
7-100
Detecting sensor
OJX1079178OJX1079178
OJX1079182OJX1079182
OJX1079183LOJX1079183L[1] : Front view camera, [2]: Front radar, 
[3] : Front corner radar (if equipped), 
[4] GENESIS GV80 2021  Owners Manual Driver Assistance System
7-100
Detecting sensor
OJX1079178OJX1079178
OJX1079182OJX1079182
OJX1079183LOJX1079183L[1] : Front view camera, [2]: Front radar, 
[3] : Front corner radar (if equipped), 
[4]](/manual-img/46/35616/w960_35616-447.png)
Driver Assistance System
7-100
Detecting sensor
OJX1079178OJX1079178
OJX1079182OJX1079182
OJX1079183LOJX1079183L[1] : Front view camera, [2]: Front radar, 
[3] : Front corner radar (if equipped), 
[4] : Rear corner radar
Refer to the picture above for the 
detailed location of the detecting 
sensors.
 CAUTION
For more details on the precautions of 
the detecting sensors, refer to “Forward 
Collision-Avoidance Assist (FCA)” 
section in chapter 7.
System Settings
Setting functions for the system
OJX1079158LOJX1079158L
Basic function
With the Engine Start/Stop button in the 
ON position, select or deselect ‘Driver 
Assistance → Driving Assist’ from the 
Settings menu to set whether or not to 
use each function. 
 -If ‘Highway Driving Assist’ is selected, 
it helps maintain distance from the 
vehicle ahead, maintain the set speed, 
and helps center the vehicle in the 
lane.
Highway Lane Change Assist (if equipped)
 - If ‘Highway Lane Change Assist’ is 
selected, it helps the driver change 
lanes.