2015 LEXUS RX350 Owners Manual

4573-3. Using the Lexus Display Audio system
3
Interior features If repeated tone symbols* are
stored in the phone book, “Send”
and “Exit” are displayed on the
right side of the screen. *: Repeated tone symbols are sym-
bols or numbers displayed as p or
w, that come after the phone num-
ber. (e.g. 056133w0123p#1
 )
Confirm the number displayed on the screen, and select “Send”. If you select “Exit”, this function will end.
■ To transfer a call
Select “Handset Mode” to change from Hands-free call to mobile
phone call.
Select “Handsfree Mode” to change from mobile phone call to Hands-
free call.
■ To hang up
Press on the steering wheel or select . STEP 3
STEP 4

4583-3. Using the Lexus Display Audio system
■ Call waiting
When a call is interrupted by a third party while talking, the incoming
call message will be displayed.
To talk with the other party:
• Press on the steering wheel.
• Select .
To refuse the call:
• Press on the steering wheel.
• Select .
Every time you press on the s teering wheel or select during
call waiting, you will be switched to the other party.■
Transferring calls ●
It is not possible to transfer from hand s-free to the mobile phone while driving.●
If you transfer from the mobile phone to hands-free, the hands-free screen will
be displayed, and you can operate the system using the screen.●
Transfer method and operate may vary according to the mobile phone used.●
For operation of the mobile phone in use, see the phone’s manual.■
Call waiting operation
Call waiting operation may differ depending on your phone company and mobile
phone.

4593-3. Using the Lexus Display Audio system
3
Interior features Setting the hands-free system You can set the hands-free system to your desired settings.
Setting the sound
Phonebook settings
To display the screen shown above, follow the steps below.
Press the “MENU” button on the Lexus Display Audio control-
ler.
Select “Setup” on the “Menu” screen.
Select “Phone” on the “Setup” screen.STEP 1
STEP 2
STEP 3

4603-3. Using the Lexus Display Audio system
Setting the sound
Display the “Phone Settings” screen. (  P. 4 5 9 )
Select “Phone Sound Settings” on the “Phone Settings” screen.
Changes the speaker volume
(  P. 460)
Changes the ring tone volume
(  P. 460)
Changes the ring tone
(  P. 4 6 1 )
Restore default settings
When you complete settings, select “Save”.
■ Setting the volume
Select “Call Volume” or “Rin g Tone Volume” on the “Phone
Sound Settings” screen.
Select “-” or “+” to lower or raise
the volume, and then “OK”.STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2

4613-3. Using the Lexus Display Audio system
3
Interior features ■ Setting the ring tone
Select “Ring Tone” on the “Phone Sound Settings” screen.
Select “Tone1”, “Tone2” or “Tone3”
to change the r ing tone, and then
“OK”.STEP 1
STEP 2

4623-3. Using the Lexus Display Audio system
Phonebook settings
The phonebook manages a maximum of 5 phones in total. The data for
1000 contacts (up to 3 numbers per contact) can be registered in each
phonebook.
Managing the contacts
Managing the speed dials
Deleting the call history
To display the screen above, follow the steps below.
Display the “Phone Settings” screen. (  P. 4 5 9 )
Select “Phonebook” on the “Phone Settings” screen.STEP 1
STEP 2

4633-3. Using the Lexus Display Audio system
3
Interior features ■ Managing the contacts
● Transferring a phone number
You can transfer the phone nu mbers in your Bluetooth 
phone to the
system. Operation methods differ b etween PBAP compatible and PBAP
incompatible Bluetooth 
phones. If your mobile phone does not support
either PBAP or OPP services, you cannot transfer contacts.
Display the “Phonebook Settings” screen. (  P. 4 6 2 )
Select “Manage Contacts” on th e “Phonebook Settings” screen.
Select “Transfer Contacts”.
For PBAP compatible Bluetooth 
phones
Automatic phonebook down-
load on/off The phonebook data can be auto-
matically transferred.
Depending on the mobile phone,
call history will be also transferred.
Update phonebook
The phonebook data can be
updated.
Restore default settingsSTEP 1
STEP 2
STEP 3
STEP 4

4643-3. Using the Lexus Display Audio system
For PBAP incompatible Bluetooth 
phones
Replace contacts The phonebook data can be
replaced.
Add contacts The phonebook can be added.
● Deleting the phonebook data
Display the “Phonebook Settings” screen. (  P. 4 6 2 )
Select “Manage Contacts” on th e “Phonebook Settings” screen.
Select “Delete Contacts”. If your phone supports PBAP ser-
vice, “Automatically Download
Contacts” setting needs to be set
to “Off”. (  P. 4 6 3 )
Choose the data to delete.
To delete all data, select “All
Delete”.
A confirmation message will be disp layed. If everything is correct,
select “Yes”.STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5