2015 LEXUS RX350 high beam

1972-2. Instrument cluster
2
When driving ■ Indicators
The indicators inform the driver of th e operating state of the vehi-
cle’s various systems. Turn signal indicator
(  P. 1 8 7 ) (if equipped)
Intuitive parking assist
indicator
(  P. 2 4 5 )
Headlight high beam indi-
cator (  P. 2 1 3 ) Slip indicator
(  P. 270, 276)(U.S.A.)
Headlight indicator
(  P. 2 1 1 ) VSC off indicator
(  P. 2 7 1 )(Canada)
Tail light indicator
(  P. 211) Eco Driving Indicator
Light (  P. 1 5 6 )
Front fog light indicator
(  P. 2 1 5 ) (if equipped)
SRS airbag on-off indica-
tor (  P. 1 3 2 )
Cruise control indicator
(  P. 227, 232) (if equipped)
SRS airbag on-off indica-
tor (  P. 1 3 2 ) (if equipped)
Radar cruise control indi-
cator (  P. 232) * 1, 2
* 1
* 1
* 1
* 1

2132-3. Operating the light s and windshield wipers
2
When driving Turning on the high beam headlights
With the headlights on, push the
lever away from you to turn on
the high beams. Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you to turn
on the high beams. Release the lever to turn them off.
You can flash the high beams with
the headlights on or off.■
Daytime running light system ●
To make your vehicle more visible to other drivers, the daytime running lights
turn on automatically whenever the engine is started and the parking brake is
released. Daytime running lights ar e not designed for use at night.
Type A: Daytime running lights can be turned off by operating the switch.●
Compared to turning on th e headlights, the daytime running light system offers
greater durability and consumes less electricity, so it can help improve fuel
economy.■
Headlight control sensor
The sensor may not function properly if an
object is placed on the sensor, or anything
that blocks the sensor is affixed to the wind-
shield.
Doing so interferes with the sensor detecting
the level of ambient light and may cause the
automatic headlight system to malfunction.

7104-3. Do-it-yourself maintenance
46
FILTER 10 A47
IG1 MAIN 30 A ECU-IG1 NO. 6, BK/UP LP, ECU-
IG1 NO. 5, ECU-IG1 NO. 448
H-LP RH HI 15 A Right-hand headlight (high beam)49
H-LP LH HI 15 A Left-hand headlight (high beam)50
BIXENON 10 A51
H-LP RH LO 15 A Right-hand headlight (low beam)52
H-LP LH LO 15 A Left-hand headlight (low beam)53
HORN 10 A Horn54
A/F 20 A Multiport fuel injection system/
sequential multiport fuel injection sys-
tem55
S-HORN 7. 5 A S-HORNFuse Ampere Circuit

7194-3. Do-it-yourself maintenance
4
Maintenance and care Light bulbs You may replace the following bulbs by yourself. The difficulty level of
replacement varies depending on the bulb. If necessary bulb replacement
seems difficult to perform, contact your Lexus dealer.
For more information about replacing other light bulbs, contact your Lexus
dealer.
■ Preparing for light bulb replacement
Check the wattage of the light bulb to be replaced. (  P. 817)
■ Removing the engine compartment covers
 P. 6 7 1
■ Turning off the power back door main switch
 P. 5 8
■ Front bulb locations
Vehicles with halogen headlights Headlight high beamHeadlight low beam
Front turn signal light

7204-3. Do-it-yourself maintenance
Vehicles with discharge headlights
Front turn signal light Headlight high beam

7224-3. Do-it-yourself maintenance
Replacing light bulbs
■ Headlight high beams
Right side:
Open the cap.
Move the washer fluid filler
opening to allow easy access to
the light bulbs.
Unplug the connector while
depressing the lock release.
Turn the bulb base counterclock-
wise.STEP 1
STEP 2
STEP 3

7234-3. Do-it-yourself maintenance
4
Maintenance and care Replace the light bulb, and install
the bulb base. Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn and secure the bulb base.
Connect the connector. Shake the bulb base gently to
check that it is not loose, turn the
headlight high beams on once and
visually confirm that no light is leak-
ing through the mounting.
When replacing the right side bulb, install by conducting
with the directions reversed.STEP 4
STEP 5
STEP 5STEP 6
STEP 5STEP 1

7294-3. Do-it-yourself maintenance
4
Maintenance and care ■ Rear side marker light (left side)
Turn the bulb base counterclock-
wise.
Remove the light bulb.
■ Lights other than the above
If any of the lights listed below ha s burnt out, have it replaced by your
Lexus dealer.
● Discharge headlight low beams (if equipped)
● Daytime running lights
● Parking lights
● Front side marker lights
● Front fog lights
● Side turn signal lights
● Stop lights
● High mounted stoplight
● License plate lightsSTEP 1
STEP 2