2010 MITSUBISHI GRANDIS Owner's Manual (in English)

2. Press the “MENU” button repeatedly to se-
lect the mode you wish to change. The order
is: AF CT REG TP-S PH
MUTE Language of PTY display Func-
tion setup mode OFF.
NOTE l Although

“PH” and “MUTE” appear on the
display, the PH and MUTE functions are in-
operative.
3. Select the desired setting for each mode to be turned ON and OFF as shown below. The setting will be shown on the display.Example NOTE
l After

selecting a mode, you can leave the func-
tion setup mode by taking either of the fol-
lowing steps: • Press the “MENU” button for at least 2seconds.
• Make no entry for 7 seconds.
l For instructions on setting the language of
PTY display, refer to “To change the lan-
guage of PTY display” on page 5-20. For pleasant driving
5-22
5
Presented by http://mmc-manuals.ru/ \251

CD control panel and display
E007095006731- CD eject button
2-
FOLDER (Folder down) button
3- FOLDER (Folder up) button
4- Disc loading slot
5- TRACK (Track down/up) button
6- SCAN button
7- AM/FM (FM/MW/LW selection) button
8- CD (CD mode changeover) button
9- TEXT (Title display) button
10- DISC (Disc down) button *
11- PAGE (Title scroll) button
12- DISC (Disc up) button * 13- PWR (On-Off) switch
14-
RPT/RDM (Repeat/Random) button
15- CD indicator
16- DISC indicator *
17- FOLDER indicator
18- TRACK indicator
19- NAME indicator
20- SCAN indicator
21- RPT (Repeat) indicator
22- MP3 indicator
23- Track play time display
24- RDM (Random) indicator
* Operates when equipped with a CD autochanger. For pleasant driving
5-23 5
Presented by http://mmc-manuals.ru/ \251

To listen to a CD
E00709601004
With a CD player
1.
Insert disc with label facing up.When a disc is inserted, the CD indicator
(16) will come on and the CD player will be-
gin playing even if the radio is being used.
The CD player will also start playback when
the CD button (8) is pressed with a disc in
the player even if the radio is being used.
NOTE l If the system is equipped with a CD autoch-
anger, the system switches between the CD
player mode and the CD autochanger mode
each time the CD button (8) is pressed.
2. To adjust the volume and tone, refer to “To adjust the volume” on page 5-15 and “To ad-
just the tone” on page 5-15.
NOTE l When an 8 cm compact disc is used, the adapt-
er is not needed for playback. Insert the disc
in the centre of the disc-loading slot.
l For information concerning the handling of
compact discs, refer to “Handling of compact
discs” on page 5-30.
To fast-forward/fast-reverse the disc
To fast-forward or fast-reverse the disc, press the
TRACK button (5).
Fast-forward
You can fast-forward the disc by pressing the side of the TRACK button (5). While the button is
kept pressed, the disc will be fast-forwarded.
Fast-reverse You can fast-reverse the disc by pressing the side of the TRACK button (5). While the button is
kept pressed, the disc will be fast-reversed.
NOTE
l When
you have fast-forwarded/fast-reversed
the disc, the playing-time may be shown
with deviation.
To listen to an MP3 CD
This CD player allows you to play MP3 (MPEG Au-
dio Layer- 3) files recorded on CD-ROMs, CD-Rs
(recordable CDs), and CD-RWs (rewritable CDs)
in ISO9660 Level 1/Level 2, Joliet, and Romeo for-
mats. Each disc may have a maximum of 16 trees,
100 folders, and 255 files per disc. During MP3
playback, the unit can display ID3 tag information.
For information concerning ID3 tag, refer to “CD
text and MP3 title display” on page 5-26. 1. Insert
a disc containing MP3 files into the slot.
2. Press the CD button (8) for 2 seconds or lon-
ger to switch to MP3 CD mode from normal
music CD mode. The display shows “READ-
ING”, then playback will begin. The folder
number and the track number will appear on
the display. NOTE
l While

listening to a disc on which CD-DA
(CD-Digital Audio) and MP3 files have both
been recorded, you can switch between read-
ing of the CD-DA, reading of the MP3 files,
and AUX (auxiliary input) by pressing the
CD button for 2 seconds or longer (until you
hear a beep).
l With a disc that contains both CD-DA and
MP3 files, the CD-DA files are automatical-
ly played first.
l The playback sound quality differs depend-
ing on the encoding software and the bit rate.
For details, refer to the user manual of your
encoding software.
l Depending on file/folder configurations on a
disc, it may take some time before playback
starts.
l MP3 encoding software and writing software
are not supplied with this unit.
l You may encounter trouble in playing an
MP3 or displaying the information of MP3
files recorded with certain writing software
or CD recorders (CD-R/RW drivers).
l If you record too many folders or files other
than MP3 onto a disc, it may take some time
before playback starts.
l This unit does not record MP3 files.
l For information concerning CD-Rs/RWs, re-
fer to “Notes on CD-Rs/RWs” on page 5-31. For pleasant driving
5-24
5
Presented by http://mmc-manuals.ru/ \251

CAUTION
l
Attempting to play a file not in the MP3
format which has a “.mp3” file name may
produce noise from the speakers and
speaker damage, and can damage your
hearing.
Folder selection order/MP3 file playback order
(Example)
Root folder (root directory)
Tree 1 Tree 2 Tree 3 Tree 4 Folder selection
In the order
File selection
In the order
To select a desired folder (MP3 CDs only)
You

can select your desired folder by pressing the
FOLDER buttons (2 or 3). Folder up
Press

the FOLDER button (3) until the desired fold-
er number appears on the display.
Folder down
Press the FOLDER button (2) until the desired fold-
er number appears on the display.
To select a desired track
You can select your desired track by using the
TRACK button (5). Track up
Press the side of the TRACK button (5) repeat-
edly

until the desired track number appears on the
display.
Track down
Press the side of the TRACK button (5) repeat-
edly

until the desired track number appears on the
display.
NOTE
l Pressing the side of the TRACK button
(5)

once during the song will cause the CD
player to restart playback from the beginning
of the song.
To repeat a track
Press the RPT/RDM button (14) briefly while the
track is playing. “RPT” will appear on the display.
To exit the repeat mode, press the RPT/RDM but-
ton two times. For pleasant driving
5-25 5
Presented by http://mmc-manuals.ru/ \251

NOTE
l The
repeat mode will be cancelled by press-
ing the TRACK button (5), the SCAN button
(6) or CD eject button (1).
l With a disc that contains both CD-DA and
MP3 files, the repeat mode causes only files
of the same format (CD-DA only or MP3
files only) to be repeated.
To change the order of tracks for playback
Random playback for a disc (music CDs only)
Press the RPT/RDM button (14) briefly. “RDM”
will appear on the display. Tracks on the currently
selected disc will be played in a random sequence.
To exit the random mode, press the RPT/RDM but-
ton again.
Random playback for all folders on a disc (MP3
CDs only)
Press the RPT/RDM button (14) briefly. “RDM”
will appear on the display. Tracks in the currently
selected disc will be played in a random sequence.
To exit the random mode, press the RPT/RDM but-
ton again. NOTE
l The
random mode will be cancelled by press-
ing the SCAN button (6) or the CD eject but-
ton (1).
l With a disc that contains both CD-DA and
MP3 files, the random mode causes only
files of the same format (CDDA only or
MP3 files only) to be played in a random se-
quence.
To find the start of each track on a disc for playback
Press the SCAN button (6). “SCAN” will appear
on the display and the CD player will play back the
first 10 seconds of each track on the selected disc.
The track number will blink while the scan mode is
selected. To exit the scan mode, press the SCAN
button again.
NOTE l Once all tracks on the disc have been scan-
ned, playback of the disc will restart from the
beginning of the track that was playing when
scanning started.
l The scan mode will be cancelled by selecting
the RPT/RDM button (14), the TRACK but-
ton (5) or the CD eject button (1).
l With a disc that contains both CD-DA and
MP3 files, the scan mode causes only files of
the same format (CD-DA only or MP3 files
only) to be played.
To eject a disc
When the CD eject button (1) is pressed, the disc
automatically stops and is ejected. The system auto-
matically switches to radio mode. CD text and MP3 title display
E00725000298
This
CD player can display CD text and MP3 titles
including ID3 tag information.
CD text
The CD player can display disc and track titles for
discs encoded with disc and track title information.
Press the TEXT button (9) repeatedly to make se-
lections in the following sequence: disc name track name normal display mode.
Disc
name
Track name
Normal display mode NOTE
l The

display can show up to 10 characters. If
a disc name or track name has more than 10
characters, press the PAGE button (11) to
view the next 10 characters.
l When there is no title information to be dis-
played, the display shows “NO TITLE”. For pleasant driving
5-26
5
Presented by http://mmc-manuals.ru/ \251

l
Characters that the CD player cannot display
are shown as an asterisk.
MP3 title
The CD player can display folder and track titles
for discs encoded with folder and track informa-
tion. Press the TEXT button (9) for less than 1 sec-
ond repeatedly to make selections in the following
sequence: folder name track name normal
display mode. ID3 tag information
The

CD player can display ID3 tag information for
files that have been recorded with ID3 tag informa-
tion. 1. Press the TEXT button (9) for 2 seconds orlonger to switch to the ID3 tag information.
“TAG” indicator will appear on the display. 2. Then
press the DISP button for less than 1
second repeatedly to make selections in the
following sequence: album name track
name artist name normal display mode.
NOTE l To

return from ID3 tag information to the
folder name, press the TEXT button (9)
again for 2 seconds or longer.
l When there is no title information to be dis-
played, the display shows “NO TITLE”.
l The display can show up to 10 characters. If
a folder name, track name, or item of ID3 tag
information has more than 10 characters,
press the PAGE button (11) to view the next
10 characters.
l Folder names and track names can each be
displayed up to a length of 10 characters.
Items of ID3 tag information can each be dis-
played up to a length of 10 characters.
l Characters that the CD player cannot display
are shown as an asterisk.
With a CD autochanger 1. Press the CD button (11), and the CD autoch-anger mode will be selected, starting playback.
2. To adjust the volume and tone, refer to “To adjust the volume” on page 5-15 and “To ad-
just the tone” on page 5-15.
3. To stop the CD player, turn off the power by pressing the PWR switch (13) or switch to
the radio mode by pressing the AM/FM but-
ton (7).
4. For information concerning the handling of compact discs, refer to “Handling of compact
discs” on page 5-30.
To select a desired disc (CD autochanger only)
You can select by using the DISC button (10 or 12). Disc up
Press

the DISC button (12) until the desired disc is
reached. The disc indicator (16) will display the se-
lected disc number.
Disc down
Press the DISC button (10) until the desired disc is
reached. The disc indicator (16) will display the se-
lected disc number. For pleasant driving
5-27 5
Presented by http://mmc-manuals.ru/ \251

Error codes
E00710101100If an error code (1) appears in the display, take action in accordance with the table below.For pleasant driving
5-28
5
Presented by http://mmc-manuals.ru/ \251

Error display Problem Description Repair
EJ No magazine inserted Magazine is not in changer. Insert magazine into changer.
NO DISC No disc inserted Disc is not in CD player.Insert disc.
E 01 Focus error Disc is not loaded correctly, or condensation
on disc.Insert disc with label facing up.
Remove moisture from disc.
E 02 Disc error Disc is dirty, scratched, or deformed; or ex-
cessive vehicle vibration.Clean or replace disc.
Retry when vibrations stop.
E 03 Mechanism error Loading or eject error.
Pick-up is out of position.Eject disc and reload. If disc will not eject,
have
the equipment inspected by a
MITSUBISHI MOTORS Authorized Serv-
ice Point.
E HOT High temperature Internal protection against high temperatures. Allow radio to cool by waiting about 30 mi-
nutes.
E Communication or power supply error Communication error between external de-
vice
and audio equipment. Power supply er-
ror of external device. Consult a MITSUBISHI MOTORS
Author-
ized Service Point. For pleasant driving
5-29 5
Presented by http://mmc-manuals.ru/ \251