2009 RENAULT TWINGO Engine And Peripherals Workshop Manual

11A-148
TOP AND FRONT OF ENGINE
Oil decanter: Removal - Refitting
K4M
11A
II - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-a new seal on the oil separator,
-the oil decanter.
aTighten to torque and in order the oil separator
bolts (10 N.m).
III - FINAL OPERATION
aRefit:
-the inlet distributor (see 12A, Fuel mixture, Inlet
distributor: Removal - Refitting, page 12A-29) ,
-the scoop under the scuttle panel grille (see Scoop
under the scuttle panel grille: Removal - Refit-
ting) (56A, Exterior equipment),
-the scuttle panel grille (see Scuttle panel grille:
Removal - Refitting) (56A, Exterior equipment),
-the windscreen wiper arms (see Windscreen wip-
er arm: Removal - Refitting) (85A, Wiping -
Washing).
aConnect the battery (see ) (80A, Battery).
101820

12A-1
FUEL MIXTURE
Air inlet: Description
C44, and K9K, and 740
12A
120044
(1) Air filter box air inlet pipe
(2) Air filter unit
(3) Air flowmeter
(4) Air filter box air outlet pipe
(5) Turbocharger
(6) Turbocharger air outlet pipe
(7) Metal air inlet tube
(8) Exhaust gas recirculation
assembly
(A) Air inlet in the air inlet circuit
(B) Air inlet in the engine
(C) Air outlet towards the exhaust
system

12A-2
FUEL MIXTURE
Air inlet: Description
D4F, and 772
12A
120416
(1) Inlet distributor
(2) Motorised throttle valve
(3) Air filter unit
(4) Air inlet pipe of the air fi lter box
(5) Air scoop

12A-3
FUEL MIXTURE
Air inlet: Description
D7F
12A
120402
(1) Intake distributor
(2) Air filter box
(3) Motorised throttle valve
(4) Air filter box outlet air pipe
(5) Air filter box air inlet pipe
(6) Air scoop

12A-4
FUEL MIXTURE
Air inlet: Description
D4F, and 780 or 782
12A
123094
(1) Turbocharger air outlet pipe
(2) Intercooler
(3) Intercooler air outlet pipe
(4) Inlet distributor
(5) Throttle valve
(6) Compressor discharge valve
(7) Air inlet pipe of the air fi lter box
(8) Air filter unit
(9) Air filter unit air outlet pipe
(10) Turbocharger

12A-5
FUEL MIXTURE
Air inlet: Description
K9K, and 718
12A
139238
(1) Air filter unit
(2) Air flowmeter
(3) Air filter unit air outlet pipe
(4) Turbocharger
(5) Air inlet pipe of the air fi lter box
(6) Intercooler air inlet pipe
(7) Intercooler

12A-6
FUEL MIXTURE
Air filter: Removal - Refitting
D4F, and 772
12A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the air filter unit (see 12A, Fuel mixture,
Air filter unit: Removal - Refitting, page 12A-13) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the bolts (1) from the air filter box cover,
-the air filter.
REFITTING
I - REFITTING PREPARATION OPERATION
aparts always to be replaced: Air filter.
aClean the air filter housing.
II - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the air filter,
-the air filter unit cover bolts.
III - FINAL OPERATION
aRefit the air filter unit (see 12A, Fuel mixture, Air fil-
ter unit: Removal - Refitting, page 12A-13) .
113509

12A-7
FUEL MIXTURE
Air filter: Removal - Refitting
C44, and K9K
12A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the engine cover,
-the air filter box (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the bolts (1) of the air filter box cover (2) .
aRaise the cover of the air filter box to remove it from
its mountings.
aMove aside the air filter cover.
aRemove the air filter and discard it.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit a new air filter.
aRefit:
-the air filter box cover,-the air filter box cover bolts
II - FINAL OPERATION.
aRefit:
-the air filter box (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
-the engine cover.
120043
Note:
Ensure that the air filter is correctly positioned in
its box.