1997 TOYOTA SUPRA length

SS0DD-04
SS-50
- SERVICE SPECIFICATIONSSUSPENSION AND AXLE
207 Author
: Date
:
1997 SUPRA (RM502U)
SUSPENSION AND AXLE
SERVICE DATA
Cold tire inflation
2JZ-GE Front
Rear225/50R16 92V 230 kPa (2.3 kgf/cm2, 33 psi)
245/45R16 94V 230 kPa (2.3 kgf/cm2, 33 psi)Cold tire inflation
pressure2JZ-GTE Front
Rear235/45ZR17 230 kPa (2.3 kgf/cm2, 33 psi)
255/40ZR17 230 kPa (2.3 kgf/cm2, 33 psi)
Vehicle height
2JZ-GE Front*1
Rear*2225/50R16 92V 186 mm (7.32 in.)
245/45R16 94V 246 mm (9.68 in.)
2JZ-GTE Front*1
Rear*2235/45ZR17188 mm (7.40 in.)
255/40ZR17254 mm (10.00 in.)
Camber 2JZ-GE
2JZ-GTE
Left-right error-0°20' ± 45' (-0.33° ± 0.75°)
-0°30' ± 45' (-0.5° ± 0.75°)
30' (0.5°) or less
Front wheel
Caster 2JZ-GE
2JZ-GTE
Left-right error3°20' ± 45' (3.33° ± 0.75°)
3°30' ± 45' (3.5° ± 0.75°)
30' (0.5°) or less
Front wheel
alignmentSteering axis inclination 2JZ-GE
2JZ-GTE9°35' ± 45' (9.58° ± 0.75°)
9°45' ± 45' (9.75° ± 0.75°)
Toe-in (Total)
Rack end length left-right error0° ± 12' (0° ± 0.2°)
0 ± 2 mm (0 ± 0.08 in.)
1.5 mm (0.059 in.) or less
Wheel angle
2JZ-GEInside wheel
Outside wheel
35°00' (33°00' - 36°00')
35° (33° - 36°)
30°45'
(30.75°)
2JZ-GTEInside wheel
Outside wheel 34°55' (33°55' - 36°55')
34.92° (32.92° - 35.92°)
30°35'
(30.58°)
Rear wheel
li t
Camber 2JZ-GE
2JZ-GTE
Left - right error-1°35' ± 45' (-1.58° ± 0.75°)
-1°30' ± 45' (-1.5° ± 0.75°)
30' (0.5°) or less
alignmentToe-in (Total)0°18' ± 12' (0.3° ± 0.2°)
3 ± 2 mm (0.12 ± 0.08 in.)
*1: Front measuring point
Measure from the ground to the center of the lower suspension arm front mounting bolt.
*
2: Rear measuring point
Measure from the ground to the center of the lower suspension arm No.2 mounting bolt.

- SERVICE SPECIFICATIONSSUSPENSION AND AXLE
SS-51
208 Author
: Date
:
1997 SUPRA (RM502U)
FtlAxle hub bearing backlash Maximum0.05 mm (0.0020 in.)Front axleAxle hub deviationMaximum0.05 mm (0.0020 in.)
Upper ball joint turning torque1.0 - 3.4 N´m (10 - 35 kgf´cm, 9 - 30 in.´lbf)
Front suspensionLower ball joint turning torque1.0 - 3.4 N´m (10 - 35 kgf´cm, 9 - 30 in.´lbf)Front sus ension
Stabilizer bar link ball joint turning torque0.05 - 1.0 N´m (0.5 - 10 kgf´cm, 0.4 - 8.7 in.´lbf)
RlAxle hub bearing backlash Maximum0.05 mm (0.0020 in.)Rear axleAxle hub deviationMaximum0.05 mm (0.0020 in.)
Drive shaft standard length
2JZ-GE RH
LH
598.1 mm (23.547 in.)
552.2 mm (21.740 in.)
Rear drive shaft2JZ-GTE (M/T) RH
LH598.5 mm (23.602 in.)
547.5 mm (21.555 in.)
2JZ-GTE (A/T) RH
LH598.5 mm (23.602 in.)
553.5 mm (21.791 in.)
Upper ball joint turning torque1.0 - 3.4 N´m (10 - 35 kgf´cm, 9 - 30 in.´lbf)
RiNo. 1 Lower ball joint turning torque1.0 - 3.4 N´m (10 - 35 kgf´cm, 9 - 30 in.´lbf)Rear suspensionNo. 2 Lower ball joint turning torque1.0 - 3.4 N´m (10 - 35 kgf´cm, 9 - 30 in.´lbf)
Stabilizer bar link ball joint turning torque0.05 - 1.0 N´m (0.5 - 10 kgf´cm, 0.4 - 8.7 in.´lbf)

SS0D0-01
SS-62
- SERVICE SPECIFICATIONSSTEERING
219 Author
: Date
:
1997 SUPRA (RM502U)
STEERING
SERVICE DATA
POWER STEERING FLUID
Fluid level rise Maximum5 mm (0.20 in.)
Fluid pressure at idle speed with valve closed Minimum7,355 kPa (75 kgf/cm2, 1,067 psi)
STEERING WHEEL
Steering wheel freeplayMaximum30 mm (1.18 in.)
Steering effort at idle speedMaximum6.9 N´m (70 kgf´cm, 61 in.´lbf)
TILT STEERING COLUMN
Pawl stopper Mark
1 or A12.68 - 12.74 mm (0.4992 - 0.5016 in.)
2 or B12.61 - 12.67 mm (0.4965 - 0.4988 in.)
3 or C12.54 - 12.60 mm (0.4937 - 0.4961 in.)
4 or D12.47 - 12.53 mm (0.4909 - 0.4933 in.)
5 or E12.40 - 12.46 mm (0.4882 - 0.4906 in.)
6 or F12.33 - 12.39 mm (0.4854 - 0.4878 in.)
7 or G12.26 - 12.32 mm (0.4827 - 0.4850 in.)
PS VANE PUMP
Rotor shaft bushing oil clearance STD0.03 - 0.05 mm (0.0012 - 0.0020 in.)
Maximum0.07 mm (0.0028 in.)
Vane plate heightMinimum8.6 mm (0.339 in.)
Vane plate thickness Minimum1.40 mm (0.0551 in.)
Vane plate lengthMinimum14.99 mm (0.5902 in.)
Vane plate to rotor groove clearanceMaximum0.035 mm (0.00137 in.)
Vane plate length Rotor and cam ring mark
NONE14.999 - 15.001 mm (0.59051 - 0.59059 in.)
114.997 - 14.999 mm (0.59043 - 0.59051 in.)
214.995 - 14.997 mm (0.59035 - 0.59043 in.)
314.993 - 14.995 mm (0.59027 - 0.59035 in.)
414.991 - 14.993 mm (0.59020 - 0.59027 in.)
Spring free length Minimum33 mm (1.30 in.)
Vane pump rotating torqueMaximum0.2 N´m (2.5 kgf´cm, 2.2 in.´lbf)
PS GEAR
Steering rack runout Maximum0.30 mm (0.0118 in.)
Total preload1.0 - 1.9 N´m (10 - 20 kgf´cm, 8.7 - 17.4 in.´lbf)
PROGRESSIVE POWER STEERING (PPS)
Solenoid valve resistance6 - 11 W