BR0GB-01
W02787
W02788
W02789
N00759
- BRAKEBRAKE FLUID
BR-5
1805 Author: Date:
1997 SUPRA (RM502U)
BRAKE FLUID
BLEEDING
HINT:
If any work is done on the brake system or if air in the brake lines
is suspected, bleed the system of air.
NOTICE:
Do not let brake fluid remain on painted surfaces. Wash it
off immediately.
1. REMOVE RESERVOIR CAP
2. FILL RESERVOIR WITH BRAKE FLUID
Fluid: SAE J1703 or FMVSS No.116DOT3
3. BLEED MASTER CYLINDER
HINT:
If the master cylinder has been disassembled or if the reservoir
becomes empty, bleed the master cylinder.
(a) Disconnect the brake lines from the master cylinder.
(b) Slowly depress the brake pedal and hold it.
(c) Block off the outer holes with your fingers, and release the
brake pedal.
(d) Repeat (b) 3 or 4 times.
4. BLEED BRAKE LINE
(a) Connect the vinyl tube to the brake caliper.
(b) Depress the brake pedal several times, then loosen the
bleeder plug with the pedal held down.
(c) At the point when fluid stops coming out, tighten the
bleeder plug, then release the brake pedal.
(d) Repeat (b) and (c) until all the air in the fluid has been bled
out.
Torque: (Bleeder plug)
11 N´m (110 kgf´cm, 8 ft´lbf)