1997 TOYOTA SUPRA weight

IN04D-01
N19409
JACK POSITION
CAUTION:
PANTOGRAPH JACK POSITION
SUPPORT POSITIONBefore jacking-up the rear and front, make sure the car is not carrying any
extra weight. Front
Rear
Safety stand and swing arm type liftFront crossmember
Differential carrier Front IN-8
- INTRODUCTIONREPAIR INSTRUCTIONS
8 Author
: Date
:
1997 SUPRA (RM502U)
VEHICLE LIFT AND SUPPORT LOCATIONS

38SUPRAÐNEW FEATURES
2. Sound Absorbing Materials
Seal material has been newly provided to the bottom of the front pillar, and a quarter service hole cover has been
newly provided to the quarter portion in order to reduce road noise while driving.
The material of sound absorbing material used in the roof side inner garnish, quarter trim, deck side trim and deck
rear trim has been changed to reduce road noise.

CRUISE CONTROL SYSTEM
1. Actuator
The '97 Supra has adopted a new motor type actuator that is both lightweight and simple in construction.
The basic construction and operation of this actuator are the same as in the '96 4Runner with 5VZ±FE engine.
For details, see the 1996 4Runner New Car Features (Pub. No. NCF126U), page 71.
2. Cruise Control ECU
Manual Cancel Function
The manual cancel function, which cancels the cruise control when the parking brake is operated, has been
discontinued.

38SUPRAÐNEW FEATURES
3. Sound Absorbing Materials
Seal material has been newly provided to the bottom of the front pillar, and a quarter service hole cover has been
newly provided to the quarter portion in order to reduce road noise while driving.
The material of sound absorbing material used in the roof side inner garnish, quarter trim, deck side trim and deck
rear trim has been changed to reduce road noise.

CRUISE CONTROL SYSTEM
1. Actuator
The '97 Supra has adopted a new motor type actuator that is both lightweight and simple in construction.
The basic construction and operation of this actuator are the same as in the '96 4Runner with 5VZ±FE engine.
For details, see the 1996 4Runner New Car Features (Pub. No. NCF126U), page 71.
2. Cruise Control ECU
Manual Cancel Function
The manual cancel function, which cancels the cruise control when the parking brake is operated, has been
discontinued.

26SUPRAÐNEW FEATURES
 DIFFERENTIAL
1. General
A differential gear ratio has been changed on the 2JZ±GE engine model.
A Helical gear type torque±sensing LSD (Limited Slip Differential) is available as an option on the SJZ±GE engine
model and 2JZ±GTE engine with automatic transmission model.
As in the '96 model, a worm gear type torque±sensing LSD is used on the model with the SJZ±GTE engine and
manual transmission.

Specifications
Model
'97 Model '96 Model
Engine Type2JZ±GE2JZ±GTE2JZ±GE2JZ±GTE
Transmission TypeManualAutomaticManualAutomaticManualAutomaticManualAutomaticItemManualAutomaticManualAutomaticManualAutomaticManualAutomatic
Differential Gear Ratio 4.803u3.1333.7694.272u3.1333.769
No. ofDrive Pinion12u151311u1513No. of
TeethRing Gear49u474947u4749
Ring Gear Size
mm (in.)205
(8.07)
u222
(8.74)205
(8.07)uu222
(8.74)205
(8.07)
No. of Differential
Pinion 2,8*1,
3u6*2 2,8*1,
3 2,6*2,
3u6*2u
*1 : Models with Helical Gear Type Torque±Sensing LSD
*
2 : Models with Worm Gear Type Torque±Sensing LSD
*
3 : Option
2. Helical Gear Type Torque±Sensing LSD
Characteristics
Good traction of high bias ratio design is obtained through the utilization of two types of friction: One is the friction
that is generated between the planet gear's tooth tips and the differential case's inner wall. The other is the friction
that is generated between the side gear end face and the thrust washer.
Quick response and minimum time lag until differential limiting force is generated.
The bias ratio sustains minimal changes due to aging and maintains a stable performance.
A simple, compact, and lightweight differential configuration has been achieved through the use of the helical gear.
Ordinary differential oil must be used; do not use special LSD oil.

29 SUPRAÐNEW FEATURES
 DRIVE SHAFT
The drive shaft outboard joint of the 2JZ±GE engine model has been changed from the cross±groove type CJV
(Constant±Velocity Joint) to the Rzeppa type CVJ.
As in the '96 model, the 2JZ±GTE engine model uses the drive shaft consisting of cross±groove type CVJs for both
the inboard and outboard joints.
 BRAKES
1. General
The size of the master cylinder for the 2JZ±GTE engine model has been increased to realize excellent brake feeling.
The ABS actuator has been changed from the conventional three±position solenoid valves to a combination of
compact two±position solenoid valves, thus achieving a compact and lightweight configuration.
3±channel type ABS with 4±speed sensor is used on the 2JZ±GE engine model.
4±channel type ABS with 4±speed sensors and linear type deceleration sensor is used on the 2JZ±GTE engine
model.

Specifications
Model
'97 Model '96 Model
Engine Type2JZ GE2JZ GTE2JZ GE2JZ GTEItem2JZ±GE2JZ±GTE2JZ±GE2JZ±GTE
MasterTypeTandemuuuMaster
CylinderDia. mm (in.)25.4 (1.00)26.9 (1.06)25.4 (1.00)u
ABS Type
3 Channel Type
ABS with
4±Speed Sensors
4 Channel Type
ABS with
4±Speed Sensors
and Linear Type
Deceleration Sensor4±Channel Type
ABS with 4±Speed
Sensor and Lateral
Acceleration Sensors
u
ABS Type Actuator
6 Two Position
Solenoid Valves8 Two Position
Solenoid Valves4 Three Position
Solenoid Valvesu

22SUPRAÐOUTLINE OF NEW FEATURES
SUPRA
OUTLINE NEW FEATURES
The Supra, which represents Toyota's advanced automotive technology, has earned a reputation as a truly luxurious
sports car. The following changes have been made for the 1997 model year.
1. Model Line±Up

The JZA80L±ALPVZA model has been discontinued.

The JZA80L±ALFVZA and JZA80L±AJFVZA models have been added.
2. Exterior Design

The multi±reflector type headlights are adopted.

The design of the turn signal light, front bumper and rear combination light has been changed.
3. Interior Equipment
The front seats have been changed from the separate±headrest type seats of the '96 model to the integrated headrest
type seats without changing their basic design.
4. 2JZ±GTE Engine
An aluminum radiator core is adopted for weight reduction.
5. Differential

A differential gear ratio has been changed on he 2JZ±GE engine model.

A helical gear type torque±sensing LSD is available as an option on the 2JZ±GE engine model and 2JZ±GTE engine
with automatic transmission model.
6. Drive Shaft
An outboard joint of drive shaft has been changed from cross±groove type CVJ (Constant±Velocity Joint) to Rzeppa
type CVJ on the 2JZ±GE engine model.
7. Brakes

A master cylinder diameter has been changed on the 2JZ±GTE engine model.

An ABS has been changed to the 2±position solenoid valve type actuator.

124APPENDIXÐSUPRA

SUPRA
Item AreaU.S.A..Body Type2±Door Liftback (Standard Roof)2±Door Liftback (Sport Roof)Vehicle GradeÐModel CodeJZA80L±ALMVFAJZA80L±ALPVFAJZA80L±AJMVFAJZA80L±AJPVFALength mm (in.)4515 (177.8)uuu
OverallWidth mm (in.)1810 (71.3)uuuOverallHeight* mm (in.)1275 (50.2)uuuWheel Base mm (in.)2550 (100.4)uuu
TreadFront mm (in.)1520 (59.8)uuuTreadRear mm (in.)1525 (60.0)uuu
Effective Head RoomFront mm (in.)953.2 (37.5)u946.8 (37.3)uEffective Head RoomRear mm (in.)834.5 (32.9)uuu
sEffective Leg RoomFront mm (in.)1117.0 (44.0)uuu
ghtsEffective Leg RoomRear mm (in.)605.1 (23.8)uuu
We i g
h
Shoulder RoomFront mm (in.)1376.3 (54.2)uuu
icle WShoulder RoomRear mm (in.)1113.2 (43.8)uuu
VehicOverhangFront mm (in.)950 (37.4)uuu
s & VeOverhangRear mm (in.)1015 (40.0)uuu
sions
&Min. Running Ground Clearance mm (in.)120 (4.7)uuu
mensioAngle of Approach degrees13uuu
DimeAngle of Departure degrees17uuu
ajor DFront kg (lb)762 (1680)778 (1715)773 (1705)789 (1740)MajoCurb WeightRear kg (lb)694 (1530)703 (1550)710 (1565)719 (1585)MCurb WeightTotal kg (lb)1456 (3210)1481 (3265)1483 (3270)1508 (3325)Front kg (lb)937 (2065)uuuGross Vehicle WeightRear kg (lb)1002 (2210)uuuGross Vehicle WeightTotal kg (lb)1939 (4275)uuuFuel Tank Capacity l (U.S. gal., Imp. gal.)70 (18.5, 15.4)uuuLuggage Compartment Capacity m3 (cu. ft.)ÐÐÐÐMax. Speed km/h (mph)240 (150)uuuMax. Cruising Speed km/h (mph)193 (120)uuu
Acceleration0 to 100 km/h sec.6.87.46.87.4
ceAcceleration0 to 400 m sec.15.215.715.215.7
mance1st Gear km/h (mph)54 (34)61 (38)54 (34)61 (38)
rform
a
Max Permissible Speed2nd Gear km/h (mph)94 (58)112 (70)94 (58)112 (70)PerfoMax. Permissible Speed3rd Gear km/h (mph)139 (86)Ð139 (86)ÐP4the Gear km/h (mph)ÐÐÐÐTurning DiameterWall to Wall m (ft.)11.5 (38)uuuTurning Diameter(Outside Front)Curb to Curb m (ft.)10.9 (36)uuuEngine Type2JZ±GEuuuValve Mechanism24±Valve, DOHCuuuBore x Stroke mm (in.)86.0 x 86.0 (3.39 x 3.39)uuu
eDisplacement cm3 (cu. in..)2997 (182.9)uuu
ngineCompression Ratio10.0 : 1uuuEngCarburetor TypeSFIuuuResearch Octane No. RON96uuuMax. Output (SAE±NET) kW/rpm (HP @ rpm)164/5800 (220 @ 5800)uuuMax. Torque (SAE±NET) N.m/rpm (lb±ft @ rpm)285/4800 (210 @ 4800)uuu
alBattery Capacity (20HR) Voltage & Amp. hr.12±52uuu
ginectric a lGenerator Output Watts1080uuuEnginElectrStarter Output kW1.4uuuClutch TypeDry, Single PlateÐDry, Single PlateÐTransmission TypeW58A340EW58A340EIn First3.2852.8043.2852.804In Second1.8941.5311.8941.531In Third1.2751.0001.2751.000Transmission Gear RatioIn Fourth1.0000.7051.0000.705Transmission Gear RatioIn Fifth0.783Ð0.783ÐIn SixthÐÐÐÐIn Reverse3.7682.3933.7682.393Differential Gear Ratio4.083uuuDifferential Gear Size mm (in.)205 (8.07)uuu
ssisBrake TypeFrontVentilated Discuuu
ChassBrake TypeRearVentilated DiscuuuChParking Brake TypeDual±ServouuuBrake Booster Type and Style in.Tandem 8º + 9ºuuuProportioning Valve TypeP & B Valveuuu
Suspension TypeFrontDouble WishboneuuuSuspension TypeRearDouble Wishboneuuu
Stabilizer BarFrontSTDuuuStabilizer BarRearSTDuuuSteering Gear TypeRack & PinionuuuSteering Gear Ratio (Overall)17.5 : 1uuuPower Steering TypeIntegral Typeuuu* : Unladen Vehicle, *1 : Electrically Controlled Transmission with an intelligent sporty control

SUPPORT POSITIONPANTOGRAPH JACK POSITION
CAUTION: Before jacking-up the rear and front, make sure the car is
not carrying any extra weight.
Front Front crossmember. . . . . . . .
Rear Rear axle beam. . . . . . . . .
JACK POSITION
Front
Safety stand and swing arm type lift . . . . . . . . . . . . . . . . . . . . . . . .
VEHICLE LIFT AND SUPPORT LOCATIONS
INTRODUCTIONIN-15