2015 DODGE CHARGER SRT Uconnect 8.4A

Before Route Guidance
Before confirming the route with the “Yes” button on the
touchscreen, it is possible to select options different from
the default route settings.
•Options – Press the “Options” button on the touch-
screen to display a list of options to alter your route. To
make a selection press and release the desired setting
until a check-mark appears.
•Avoid – Press the “Avoid” button on the touchscreen
to choose road types to avoid during your route. To
make a selection press and release the desired setting
until a check-mark appears.
376 Uconnect® 8.4AN — If Equipped

NOTE:Since toll roads, tunnels and ferries are built for
the purpose of shortening travel distances, avoiding
these road types may increase distance and travel time.
•Save – Press the “Save” button on the touchscreen to
save the destination as a Favorite.
Press the “Yes” button on the touchscreen to confirm
your destination and to start your route guidance.
NOTE:You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
View Map
Press the “View Map” button from the Nav Main Menu
to display a map of your current position.
4
Uconnect® 8.4AN — If Equipped 377

With the map displayed you have the following features
available:
Menu
Press this button on the touchscreen to return to the Nav
Main Menu.
Zoom In +/Zoom Out –
Press the “Zoom In (+) or Zoom Out (–)” buttons on the
touchscreen to change the zoom level. Roads with lower
functional classification are not shown in higher zoom
levels. (E.g. residential streets, lightly-traveled county
roads.)
Time of Arrival/Time to Destination/Distance (only
during route guidance)
Press the button in the upper right area of the screen to
the display items available. Press the desired option
button on the touchscreen.
•Time of Arrival
•Time to Destination
•Distance
378 Uconnect® 8.4AN — If Equipped

Turn List (only during route guidance)
Press the area in the upper center part of the screen that
displays your next turn to see a Turn List for your current
route.
Press a turn in the displayed Turn List for the following
options:
•Show on Map
•Avoid Street
Options (only during route guidance)
Press the “Options” button on the touchscreen to display
the following options. Press the desired button on the
touchscreen.
•2D North Up/Map View 2D/Map View 3D (3D
Available On 8.4AN)
Press this button on the touchscreen to scroll between the
three viewing options.
•Settings
Press this button on the touchscreen to view all the
available settings. See View Map – Settings for more
information.
•Repeat
Press this button on the touchscreen to repeat the current
voice prompt.
•Turn List
Press this button on the touchscreen to view the turn list
for the current route.
•Stop Guidance
Press this button on the touchscreen to stop route
guidance.
4
Uconnect® 8.4AN — If Equipped 379

Where Am I?
Press the area in the lower center part of the screen that
displays your current location to view the Where Am I?
view.
Where Am I? displays the address and GEO Coordinates
of your current location.
•Press the “GPS” button on the touchscreen to view the
GPS information.
•Press the “Save” button on the touchscreen to save the
location in your Favorites.
You can press the “back” arrow button on the touch-
screen to return to the previous screen or the “X” button
on the touchscreen to exit.
380 Uconnect® 8.4AN — If Equipped

View Map — Settings
With the Map displayed, press the “Options” button on
the touchscreen and then press the “Settings” button on
the touchscreen. You can also access this menu by press-
ing the “Settings” button in the lower right of the Nav
Main Menu.
The following Map Settings are available:
Map Setup
Press this button on the touchscreen to display items to
customize how your map is viewed. Settings – Map
Setup for more information.
Speed Limit
Press this button on the touchscreen to turn on/off speed
limit warning announcements and to enter a pre-defined
speed limit for your route.
Guidance
Press this button on the touchscreen to display items to
customize your route guidance. For more information, go
to Settings - Guidance section of this manual.
4
Uconnect® 8.4AN — If Equipped 381

GPS
Press this button on the touchscreen to change the GPS
display. Press the desired button on the touchscreen.
•Decimal
•DMS
•DM
Settings — Map Setup
With the Map displayed, press the “Options” button on
the touchscreen, then press the “Settings” button on the
touchscreen and then the “Map Setup” button on the
touchscreen. You can also access this menu by pressing
the “Settings” button lower right of the Nav Main Menu.
The following Map Setup options are available:
Map View
Press this button on the touchscreen to change how the
Map View is displayed. Press the desired button on the
touchscreen.
382 Uconnect® 8.4AN — If Equipped

•3D (3D Map View Is Only Available On Uconnect
8.4AN. Must Select 3D City Models Or 3D Landmarks
For 3D Map View To Display.)
•2D
Orientation
Press this button on the touchscreen to change how the
Map Orientation is displayed. Press the desired button on
the touchscreen.
•North Up
•Heading Up
Current Street
Press this button on the touchscreen to turn on/off the
current street display on the lower center of the Map
View. Press and release the button on the touchscreen
until a check-mark appears, showing the setting has been
selected.
Destination Information
Press this button on the touchscreen to change the
Destination Information that is displayed in the upper
right corner of the Map View. Press the desired button on
the touchscreen.
•Time of Arrival
•Time to Destination
•Distance
AutoZoom
Press this button on the touchscreen to change how the
AutoZoom feature adjust the zoom level during guid-
ance in Map View. Press the desired button on the
touchscreen.
•Far
•Normal
4
Uconnect® 8.4AN — If Equipped 383