Only the 10 most recent saved runs will be stored and
available on the website, so the oldest run will be
overwritten for another if there are already 10. Each
saved run will be stored on the website until it is
overwritten.
The Timers page is only shown when the driver selects
the Timers button on the faceplate. It will not appear
when criteria for a timer has been met or when prior
performance exceeded. However, the timer results will be
calculated upon meeting the criteria of that timer.
7. If you chose the G-Force tab, you will see displays of
the vehicle dynamics from G-Force page including
information such as:
•Vehicle Drift Graphic — Vehicle graphic will adjust
based on vehicle’s movement.
•Current speed — Same as the instrument cluster.
•Steering Angle — Uses the steering angle sensor to
measure the degree of steering wheel.
•Lateral G-force — Measures the left and right turn-
ing force of the vehicle.
•Longitudinal G-force — The longitudinal g-force will
measure the acceleration and braking force of the
vehicle.
•G-force visual — Visual of the current amount of
g-force the vehicle is producing, either longitudinal
or lateral.
2
ALL ABOUT Uconnect® ACCESS 87
8. If the Gauges 1 tab is chosen, you will see a display of
vehicle gauges. Information displayed will be the
same as on the instrument cluster such as:
•Oil Temperature
•Battery Voltage
•Oil Pressure
9. If the Gauges 2 tab is chosen, you will see a display of
vehicle gauges with information such as:
•Oil Temperature
•Battery Voltage
•Oil Pressure
•Coolant temperature
•Intake Air Temperature
10. If the Engine tab is chosen, you will see a display of
real-time engine data that will be the same as dis-
played on the instrument cluster such as:
•Speedometer — Current speed reading.
•Horsepower — Current horsepower reading.
•Torque — Current torque reading.
•Oil Pressure — Current oil pressure reading.
88 ALL ABOUT Uconnect® ACCESS
