2014 MERCEDES-BENZ CLS-Class Owner's Manual

The
From Reset trip computer is
automatically reset if the value exceeds
9,999 hours or 99,99 9miles.
ECO display Example: ECO display
X
Press the 000Aor0004 button on the
steerin gwheel to select the Trip menu.
X Select ECO DISPLAY with
0006 or0005.
If the ignition remains switched off for longer
than four hours, the ECO display will be
automatically reset.
Further information on the ECO display
(Y page 170).
Displaying the range and current fuel
consumption X
Press the 000Aor0004 button on the
steerin gwheel to select the Trip menu.
X Press the 0006or0005 button to select the
curren tfuel consumption (not for AMG
vehicles) and the approximate range.
The approximate range that can be covered
depends on the fuel level and your current
driving style. If there is only asmall amount
of fuel left in the fuel tank,t he display shows
av ehicle being refueled 0014instead of the
range. Digital speedometer 001A
Shift recommendation (Y page 161)
0010 Digital speedometer
X Press the 000Aor0004 button on the
steerin gwheel to select the Trip menu.
X Press the 0006or0005 button to select the
digital speedometer.
i If the gearshift recommendation is shown
at the top of the multifunction display ,itis
no longer shown at the bottom of the
multifunction display.
Resetting values Example: resetting the trip computer "From Start"
X Press the 000Aor0004 button on the
steerin gwheel to select the Trip menu.
X Press the 0006or0005 button to select the
function that you wish to reset.
X Press the 000Cbutton.
X Press the 0005button to select Yes and
press the 000Cbutton to confirm.
You can reset the values of the following
functions:
R Trip odometer
R "From Start" trip computer
R "From Reset" trip computer
R ECO display Menus and submenus
223On-board computer and displays Z

i
When you reset the values in the "ECO
display" ,the values in the trip computer
"From start "are likewise reset. When you
reset the values in the trip computer "From
start", the values in the "ECO display" are
likewise reset. Navigation system menu
Displaying navigation instructions In the
Navi menu, the multifunction display
shows navigation instructions. For more
information on navigation ,see the separate
operatin ginstructions.
X Switc honC OMAND (see the separate
operatin ginstructions).
X Press the 000Aor0004 button on the
steering wheel to select the Navi menu.
Rout eguidance not active 001A
Direction of travel
0010 Current road
Rout eguidance active No change of direction announced
001A
Distance to the destination
0010 Distance to the nextc hange of direction
0024 Current road
0021 "Follow the road's course" symbol Change of direction announced without a
lane recommendation 001A
Road intow hich the change of direction
leads
0010 Distance to change of direction and visual
distanc edisplay
0024 Change-of-direction symbol
When achange of direction is announced, you
will see symbol 0024for the change of direction
and distanc egraphic 0010.The distance
indicator shortenst owards the top of the
displayasy ou approach the point of the
announced change of direction.
Change of direction announced with a
lane recommendation 001A
Road into which the change of direction
leads
0010 Distancetoc hange of direction and visual
distance display
0024 New lane during achange of direction
0021 Uninterrupted lane
001E Lane recommendation
0025 Change-of-direction symbol
On multilane roads, the system can display
lane recommendation 0024for the next change
of direction. During the change of direction,
additional lanes may be displayed.
Lane recommendations are only displayed if
the relevant data is available on the digital
map. 224
Menus and submenusOn-board computer and displays

Other status indicator
softhe
navigation system R
000D:y ou have reached the destination or an
intermediate destination.
R New Route... or
Calculating Route :
calculating anew route
R Off Map or
Off Road :t
he vehicle position
is outside the area of the digital map (off-
map position).
R No Route :nor
oute could be calculated to
the selected destination. Audio menu
Selecting aradio station 001A
Waveband
0010 Station frequency with memory position
i Station 0010is displayedw itht he station
frequency or statio nname. The memory
position is only displayeda long with
station 0010if this has bee nstored.
X Switch on the audi osystemorC OMAND
and select Radio; see the separate
operating instructions.
X Press the 000Aor0004 button on the
steering wheel to select the Audio menu.
X To select astore dstation: brieflypress
the 0006 or0005 button.
X To select astation from the station
list: press and briefl yholdt he 0006
or 0005 button.
If no statio nlist is received:
X To select astatio nusing the station
search: press and briefl yholdt he 0006
or 0005 button. i
For informatio nonswitchin gwaveband
and storin gstations ;see th eseparate
operatin ginstructions.
i SIRIUS XM satellit eradio function slike a
normal radio.
For mor einformatio nonsatelliteradio
operation, see th eseparate operating
instructions.
Operatin ganaudio player or audio
media Example
:CD/DVD change rdisplay
001A Curren ttitle
Audio data from various audio devices or
media can be played, depending on the
equipmen tinstalled in the vehicle.
X Switch on COMAND and activate audio
CD/DV DmodeorM P3 mode; see the
separate operating instructions.
X Press the 000Aor0004 button on the
steering whee ltoselect the Audio menu.
X To select the next/previous track:
briefl ypress the 0006or0005 button.
X To select atrack from the track list
(rapi dscrolling): press and hold the
0006 or0005 buttonuntil desired
track 001Ahasb eenr eached.
If yo upress and hold 0006or0005,t he
rapi dscrolling speed is increased .Not all
audio drives or data carriers support this
function.
If track information is stored on the audio
device or medium, the multifunction display
will show the number and title of the track.
The current track does not appear in audio
AUX mode (Auxiliary audio mode: external
audio source connected). Menus and submenus
225On-board computer and displays Z

Vide
oDVD operation Example
:CD/DVD change rdisplay
001A Curren tscene
X Switch on COMAN Dand select video DVD;
see the separate operating instructions.
X Press the 000Aor0004 button on the
steering whee ltoselect the Audio menu.
X To select the next/previous scene:
briefl ypress the 0006or0005 button.
X To select ascene from th escene list
(rapid scrolling): press and hold the
0006 or0005 buttonuntil desired
scene 001Ahasb eenr eached. Telephon
emenu
Introduction G
WARNING
If yo uoperate informatio nsystems and
communication equipmen tintegrated in the
vehicl ewhile driving, you will be distracted
from traffic conditions. You could also lose
control of th evehicle. There is ariskofan
accident.
Only operate th eequipmen twhen the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the
equipment when the vehicle is stationary.
When telephoning, you must observe the
legal requirements for the countryinw hich
you are currently driving.
X Switch on the mobile phone (see the
separate operating instructions).
X Switch on COMAND (see the separate
operating instructions). X
Establish aBluetooth ®
connection to
COMAND; see the separate operating
instructions.
X Press the 000Aor0004 button on the
steering wheel to select the Tel menu.
You will see one of the following display
messages in the multifunction display:
R Phone READY or the name of the network
provider: the mobile phone has found a
network and is ready to receive.
R Phone No Service :t
here is no network
available or the mobile phone is searching
for anetwork.
Accepting acall Example: incoming call
X
Press the 0006button on the steering
wheel to accep tanincoming call.
If someone calls yo uwheny ou areint he
Tel menu
,adisplay message appear sinthe
multifunctio ndisplay.
You can accept acall even if you are not in
the Tel menu.
Rejecting or ending acall X
Press the 0008button on the steering
wheel.
You can end or reject acall even if you are not
in the Tel menu.
Dialin ganumbe rfrom the phone book X
Press the 000Aor0004 button on the
steering wheel to select the Tel menu.
X Press the 0006,0005or000C button to
switch to the phone book. 226
Menus and submenusOn-board computer and displays

X
Press the 0006or0005 button to select the
desired name.
or
X To begin rapid scrolling: press and hold
the 0006 or0005 button for longer than
one second.
Rapid scrolling stops when you release the
button or reach the end of the list.
X If only one telephone number is stored
for aname: press the 0006or000C button
to start dialing.
or
X If thereism ore thanone number for a
particular name: press the0006or000C
button to display the numbers.
X Press the 0006or0005 button to select the
number you want to dial.
X Press the 0006or000C button to start
dialing.
or
X To exit the telephone book: press the
0008 or0002 button.
Redialing The on-board computer saves the last names
or numbers dialed in the redial memory.
X Press the 000Aor0004 button on the
steerin gwheel to select the Tel menu.
X Press the 0006button to switch to the
redial memory.
X Press the 0006or0005 button to select the
desired name or number.
X Press the 0006or000C button to start
dialing.
or
X To exit the redial memory: press the
0008 or0002 button. Assistance menu
Introduction In the
DriveAssist menu, you have the
following options:
R Displaying the assistanc egraphic
(Y page 227)
R Activating/deactivating
ESP ®
(Y page 227)
R Activating/deactivating PRE-SAFE ®
Brake
(Y page 228)
R Activating/deactivating ATTENTION
ASSIST (Y page 228)
R Activating/deactivating Blind Spot Assist
or Active Blind Spot Assist (Y page 228)
R Activating/deactivating Lane Keeping
Assist or Active Lane Keeping Assist
(Y page 229)
Displaying the assistance graphic X
Press the 000Aor0004 button on the
steerin gwheel to select the DriveAssist menu.
X Press the 0006or0005 button to select
Assist. Graphic .
X Press the 000Cbutton.
The DISTRONIC PLUS assistanc egraphic
appears in the multifunction display
(Y page 184).
Deactivating/activating ESP ® i
Observe the "Importan tsafet ynotes"
sectio ninthedescription of ESP
(Y page 68). Menu
sand submenus
227On-boardcomputer and displays Z

G
WARNING
If you deactivate ESP ®
,E SP ®
no longer
stabilizes the vehicle. There is an increased
risk of skidding and an accident.
Only deactivate ESP ®
in the situations
described in the following.
It may be best to deactivate ESP ®
in the
following situations:
R when using snow chains
R in deep snow
R on sand or gravel
Activating/deactivating ESP ®
on AMG
vehicles (Y page70).
For further information about ESP ®
,s ee
(Y page6 8).
X Start the engine.
X Press the 000Aor0004 button on the
steering whee ltoselect the DriveAssist menu.
X Press the 0006or0005 button to select
ESP .
X Press the 000Cbutton.
The current selection is displayed.
X To activate/deactivate: press the000C
button again.
ESP ®
is deactivated if the 0009warning lamp
in the instrument cluster lights up
continuously when the engine is running.
If the 0011 warning lamp and the 0009
warning lamp are lit continuously,E SP®
is not
available due to amalfunction.
Observe the information on warning lamps
(Y page2 69).
Observe the information on display messages
(Y page2 38). Activating/deactivating PRE-SAFE
®
Brake PRE-SAFE
®
Brake is only available in vehicles
with DISTRONIC PLUS.
X Press 000Aor0004 on the steering wheel
to select the DriveAssist menu.
X Press the 0006or0005 button to select
PRE-SAF EBrake .
X Press the 000Cbutton.
The current selection is displayed.
X To activate/deactivate: press the000C
button again.
When PRE-SAFE ®
Brake is deactivated, the
assistance graphic show sthe 0001 symbol in
the multifunction display.
For more information on PRE-SAFE ®
Brake,
see (Y page72).
Activating/deactivating ATTENTION
ASSIST X
Press 000Aor0004 on the steering wheel
to select the DriveAssist menu.
X Press 0006or0005 to select Attention Assist .
X Press the 000Cbutton.
The current selection is displayed.
X To activate/deactivate: press the000C
button again.
When ATTENTION ASSIST is deactivated, the
0001 symbol and OFF appear in the
multifunction display in the assistance
display when the engine is running.
For further information about ATTENTION
ASSIST, see ( Ypage2 03).
Activating/deactivating Blind Spot
Assist X
Press 000Aor0004 on the steering wheel
to select the DriveAssist menu.
X Press the 0006or0005 button to select
Blind Spot Asst .228
Menus and submenusOn-board computer and displays

X
Press the 000Cbutton.
The curren tselection is displayed.
X To activate/deactivate: press the000C
button again.
If the Blind Spot Assist Sensors Deactivated or
Act. Blind Spot Asst. Sensors Deactivated message appears,
the radar sensor system is deactivated.
X Switc hont he radar sensor system
(Y page 232).
For further information about Blind Spot
Assist ,see (Y page 207).
For further information about Active Blind
Spot Assist ,see (Y page 211).
Activating/deactivating Lane Keeping
Assist X
Press 000Aor0004 on the steering wheel
to select the DriveAssist menu.
X Press the 0006or0005 button to select
Lane Keep. Asst. X
Press the 000Cbutton.
The curren tselection is displayed.
X Press 000Cto confirm.
X Press the 0005or0006 button to set Off ,
Standard or
Adaptive .
X Press the 000Cbutton to save the setting.
For further information about Lane Keeping
Assist ,see (Y page 209).
For further information about Active Lane
Keeping Assist ,see (Y page 214). Maintenance menu
In the
Serv. menu, you have the following
options: R
Calling up display messages in message
memory (Y page 237)
R Restarting the tire pressure loss warning
system (Y page 342)
R Checkin gthe tire pressure electronically
(Y page 342)
R Calling up the servic edue date
(Y page 310) Settings menu
Introduction In the
Sett. menu, you have the following
options:
R Changing the instrument cluster settings
(Y page 229)
R Changing the light settings (Y page 230)
R Changing the vehicle settings
(Y page 232)
R Changing the convenience settings
(Y page 233)
R Restorin gthe factory settings
(Y page 234)
Instrument cluster Selecting the unit of measurement for
distance
The
Display Unit Speed-/Odometer: function allows you to choose whether
certain displays appear in kilometers or miles
in the multifunction display. Menus and submenus
229On-boardcomputer and displays Z

You can determin
ewhether the multifunction
display shows some messages in miles or
kilometers.
X Press the 000Aor0004 button on the
steerin gwheel to selec tthe Sett. menu.
X Press the 0005or0006 button to select the
Inst. Cluster submenu.
X Press 000Cto confirm.
X Press the 0005or0006 button to select the
Display Unit Speed-/Odometer: function.
You will see the selected setting:
km or
miles .
X Press the 000Cbutton to save the setting.
The selected unit of measurement for
distance applies to:
R the digital speedometer in the Trip menu
R odometer and the trip odometer
R trip computer
R current consumption and the range
R the navigation instructions in the Navimenu
R cruise control
R DISTRONIC PLUS
R ASSYST PLUS service interval display
Selecting the permanent display function
You can determine whether the multifunction
displayp ermanently shows your speed or the
outside temperature.
X Press the 000Aor0004 button on the
steering wheel to select the Sett. menu.
X Press the 0005or0006 button to select the
Inst. Cluster submenu.
X Press 000Cto confirm.
X Press the 0005or0006 button to select the
Permanent Display: function.
You will see the selected setting OutsideTemperature or
Speedometer [km/h] (USA)/Speedometer [mph] (Canada).
X Press the 000Cbutton to save the setting. i
The speed is shown in km/h (USA)/mph
(Canada).
Lights Setting the brightness of the instrument
cluster lighting and switches
The lighting in the instrumentc
luster,inthe
displays and the controls in the vehicle
interior can be adjusted using the
Brightness Display/Switches: function.
X Press the 000Aor0004 button on the
steerin gwheel to selec tthe Sett. menu.
X Press the 0005or0006 button to select the
Lights submenu.
X Press 000Cto confirm.
X Press the 0005or0006 button to select the
Brightness Display/Switches: function.
You will see the selected setting.
X Press 000Cto confirm.
X Press the 0005or0006 button to adjust the
brightness to any level from Level 1 to
Level 5 (bright).
X Press the 000Cor0002 button to save the
setting.
If the light switch is set to 000D,0008or
001D,t he brightness is dependent upon
the brightness of the ambient light.
i The light sensor in the instrumentc luster
automatically controls the brightnes sof
the multifunction display.
In daylight, the displays in the instrument
cluster are not illuminated.
Switching th edaytime running lamps on/
off
i This function is not available in Canada.
X Press the 000Aor0004 button on the
steerin gwheel to selec tthe Sett. menu.
X Press the 0005or0006 button to select the
Lights submenu.
X Press 000Cto confirm. 230
Menus and submenusOn-board computer and displays