2012 RENAULT PULSE Owners Manual


> (GLW    0RGHO .$2(0B5HQDXOW @
16. Radio memory buttons
17. RP\f (Repeat)\bMIX (Mix play) button
Anti-theft system (if equipped)
\fhis unit can only be activated when the ignition switch
for Anti-\fheft System is in the “ACC” or “ON” position.
Each radio is uniquely matched to the vehicle’s
immobilizer and therefore cannot be transferred to
any other vehicle.
Audio main operation
\fhe audio system operates when the ignition switch is
in the “ACC” or “ON” position.
POWER ON/OFF button:
\fo turn on the audio system, push the POWER ON\b
OFF button.
.\fhe system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
\fo turn off the audio system, push the POWER ON\b
OFF button.
Volume control:
\fo control the volume, turn the VOLUME control dial.
\furn the VOLUME control dial clockwise to make the
sound louder.
\furn the VOLUME control dial counterclockwise to
make the sound quieter.
Sound preference button:
\fo enter the audio mode (radio or CD) , push the
button. When no CD is loaded, the audio system will
automatically switch to the radio mode. \fo change the audio settings (BASS, \fREBLE,
FADER, BALANCE, EQ) , push the
button or
EN\fER button to select the mode.
BASS ?\fREBLE ?BALANCE ?FADER ?EQ ?
BASS
\fo adjust each audio setting, turn the VOL control dial
clockwise or counterclockwise.
BASS: (í) to decrease \b (+) to increase
\fREB(LE): (í) to decrease \b (+) to increase
BAL(ANCE): (R) to right balance \b (L) to left balance
FADE(R): (F) to front fade \b (R) to rear fade
EQ (Equalizer): Use this control to change the preset
sound mode for CD play.
\furn the MENU\bVOL dial clockwise or counterclock-
wise. \fhe mode will change as follows:
OFF ⇔ENHANCE
If the audio settings mode is unchanged for approxi-
mately 8 seconds, the audio settings mode will
automatically return to the normal mode.
MENU button:
\fo configure the SPEED volume and BEEP settings,
perform the following procedure:
1. Push the MENU button.
2. \furn the VOLUME dial clockwise or counter- clockwise. \fhe display message will change as
follows:
PHONE SE\fUP ⇔SPEED VOL⇔CLOCK ⇔
BEEP ⇔PHONE SE\fUP
. When SPEED VOL appears on the display, briefly
push on the EN\fER button then turn the VOLUME
dial clockwise or counterclockwise to adjust the
level of the volume. Adjusting the setting to 0 (zero) turns off the
speed volume feature. Increasing the speed
volume setting results in the audio volume
increasing more rapidly with vehicle speed. Push
the EN\fER button again to save the setting.
. When BEEP appears on the display, briefly push
the EN\fER button and then turn the VOLUME dial
clockwise or counterclockwise to switch the beep
sound on or off. Push the EN\fER button again to
save the setting.
\fo configure Alternative Frequency, Regional and
Language settings, perform the following procedure:
1. Push and hold the MENU button for at least 1.5 seconds.
2. \furn the VOLUME dial clockwise or counter- clockwise. \fhe display message will change as
follows:
AF⇔REG ⇔LANGUAGE ⇔AF
. \fo activate or deactivate the AF and REG mode,
briefly push on the EN\fER button when AF or
REG appears on the display and turn the
VOLUME dial clockwise or counterclockwise to
switch between the off or on position. After
selection, push the EN\fER button to confirm the
settings.
— When the AF mode is enabled, the audio unit
will automatically re-tune to a stronger fre-
quency if the radio signal becomes weak.
— When the REG mode is enabled, the audio unit will maintain and hold the station which is
broadcasting local (regional) programmes.
. \fo change the display language, briefly push the
EN\fER button when LANGUAGE appears on the
display then turn the VOLUME dial clockwise or
counterclockwise to select the appropriate lan-
guage setting.
Heater and air conditioner, and audio system4-25
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-26Heater and air conditioner, and audio system
ENGLISH⇔DUTCH ⇔FRENCH ⇔SPANISH
⇔ GER\fAN ⇔ITALIAN ⇔PORTUGUESE ⇔
ENGLISH
Aft\br s\bl\bcting th\b d\bsir\bd languag\b, push th\b
ENTER button to \bxit th\b m\bnu.
Aft\br th\b d\bsir\bd l\bv\bls hav\b b\b\bn s\bt, push th\b \fENU
button to \bxit th\b m\bnu or wait at l\bast for 10 s\bconds
without pr\bssing any buttons.
Clock :
Clock display can b\b turn\bd on and off, and clock can
b\b adjust\bd.
. Wh\bn clock is not display\bd
1. Turn th\b audio unit on by pushing th\b POWER ON/OFF button.
2. Push th\b \fENU button and turn th\b VOLU\fE control knob until “CLOCK” is display\bd.
3. Push th\b ENTER button. (“CLOCK OFF” is display\bd)
4. Turn th\b VOLU\fE control knob to turn th\b clock display mod\b on. (“CLOCK ON” is display\bd)
5. Push th\b ENTER button. Th\b hour display will start flashing.
6. Turn th\b VOLU\fE control knob to adjust th\b tim\b.
7. Push th\b ENTER button. Th\b minut\b display will start flashing.
8. Turn th\b VOLU\fE control knob to adjust th\b tim\b.
9. Push th\b ENTER button to finish th\b clock adjustm\bnt.
. Wh\bn clock is display\bd
1. Turn th\b audio unit on by pushing th\b POWER ON/OFF button.
2. Push th\b \fENU button and turn th\b VOLU\fE control knob until “CLOCK” is display\bd. 3. Push th\b ENTER button. (“CLOCK ON” is
display\bd.)
4. P\brform st\bps 5 to 9 abov\b to adjust th\b tim\b.
CD play\br op\bration
JVH0004X
Th\b audio syst\bm op\brat\bs wh\bn th\b ignition switch is
in th\b “ACC” or “ON” position.
Loading:
Ins\brt a CD into th\b slot with th\b lab\bl sid\b facing up.
Th\b CD will b\b guid\bd automatically into th\b slot and
will start playing. If th\b radio is alr\bady playing, it will
automatically turn off, and th\b CD will start playing.
CAUTION:
Do not force the CD into the slot. This could
damage the player.
Aft\br loading th\b CD, th\b numb\br of tracks and th\b
playtim\b will app\bar on th\b display.
8 cm (3.1 in) diam\bt\br CDs can b\b play\bd without
using an adapt\br.
CD button:
Wh\bn th\b
button is push\bd whil\b th\b audio
syst\bm is off and a CD is load\bd, th\b audio syst\bm will
turn on and a CD will start playing automatically. If th\b
radio is alr\bady playing, it will automatically turn off and
th\b CD will start playing.
FF (Fast Forward) , REW (Rewind)
button :
Wh\bn th\b (fast forward) or (r\bwind) button is push\bd
whil\b th\b CD is b\bing play\bd, th\b CD will play whil\b
fast forwarding or r\bwinding. Wh\bn th\b button is
r\bl\bas\bd, th\b CD will r\bturn to normal play sp\b\bd.
TRACK UP/DOWN button:
Wh\bn th\b
button is push\bd whil\b a CD is b\bing
play\bd, th\b pr\bs\bnt track will b\b advanc\bd and mov\b to
th\b n\bxt track. Push th\b
button s\bv\bral tim\bs to
skip forward tracks. Th\b CD will advanc\b th\b numb\br
of tim\bs th\b button is push\bd. Wh\bn th\b last track of
th\b CD is forward\bd, th\b first track will b\b play\bd.
Wh\bn th\b
button is push\bd whil\b a CD is b\bing
play\bd, th\b pr\bs\bnt track will start ov\br from th\b
b\bginning. Push th\b
button s\bv\bral tim\bs to skip
back tracks. Th\b CD will r\bwind th\b numb\br of tim\bs
th\b button is push\bd. Wh\bn th\b first track of th\b CD is
r\bwound, th\b last track will b\b play\bd.
Repeat/MIX button:
Push th\b
button r\bp\bat\bdly to chang\b th\b play
mod\b as follows:
RPT (REPEAT) TRACK ?\fIX DISC ?RPT
(REPEAT) ALL
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
RPT TRACK: The CD player plays the curre\ft track
co\fti\fuously\b
RPT ALL: All the tracks o\f the CD will be played i\f
seque\ftial order\b
MIX DISC: All the tracks o\f the CD will be played i\f a
ra\fdom order\b
CD EJECT button:
Whe\f the
butto\f is pushed while a CD is loaded,
the CD will be ejected\b
Whe\f the
butto\f is pushed twice, the CD will be
ejected further, a\fd the CD ca\f be removed with ease\b
If a CD is ejected by pushi\fg the
butto\f, a\fd it is
\fot take\f out from the loadi\fg slot, the CD will
automatically be reloaded to the slot to protect the CD\b
AUX button:
The AUX IN jack is located o\f the audio u\fit\b The AUX
IN audio i\fput jack accepts a\fy sta\fdard a\falog audio
i\fput such as from a portable cassette tape/CD player,
MP3 player, laptop computers, etc\b
Push the AUX butto\f to play a compatible device whe\f
it is plugged i\fto the AUX IN jack\b
CAUTION:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio operatio\f
JVH0004X
The audio system operates whe\f the ig\fitio\f switch is
i\f the “ACC” or “ON” positio\f\b
FM-AM button:
Whe\f the
butto\f is pushed while the audio
system is off, the audio system will tur\f o\f a\fd the
radio will tur\f o\f\b Whe\f the
butto\f is pushed
while CD is already operati\fg, it will automatically tur\f
off, a\fd the radio will tur\f o\f\b
To cha\fge the radio ba\fds, push the
butto\f u\ftil
the desired ba\fd appears\b
FM 1 ?FM 2 ?FM T ?MW ?LW
Duri\fg FM receptio\f, whe\f the
butto\f is pushed
for lo\fger tha\f 1\b5 seco\fds, statio\fs are searched for
a\fd the 6 statio\fs of the FM T ba\fd\b The sou\fd is
muted u\ftil the auto store operatio\f is completed,
upo\f which preset cha\f\fel 1 is automatically tu\fed i\f\b
TUNE button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
ma\fually, push the
butto\f u\ftil the desired
freque\fcy is achieved\b
The freque\fcy cha\fges i\f steps of 100 kHz o\f the FM
ba\fd, 9 kHz o\f the MW ba\fd, a\fd 3 kHz o\f the LW
ba\fd\b
SEEK button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
automatically, push the
butto\f\b Whe\f the
system detects a broadcasti\fg statio\f, it will stop at
the statio\f\b
Heater and air conditioner, and audio system4-27
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-28Heater and air conditioner, and audio system
*1*2*3*4*5*6Radio memory buttons:
The audio system can store u\f to 18 FM station
\brequencies (six in each o\b FM 1, FM 2 and FM T) , 6
MW and 6 LW station \brequencies.
To store the station \brequency manually:
1. Tune to the desired broadcasting station \bre- quency by using the
orbutton.
2. Push and hold a radio memory button
*1-*6until a bee\f sounds. (The radio mutes when the
memory button is \fushed.)
3. The channel indicator will dis\flay and the radio mute disengages, indicating that the memory is
stored \fro\ferly.
4. Per\borm ste\fs 1 - 3 \bor all other memory buttons.
I\b the battery cable is disconnected, or i\b the audio \buse
blows, the radio memory will be erased. In such a case,
reset the desired stations.
Radio data system (RDS)
Alternative Frequency (AF):
. The AF \bunction o\ferates in the FM (radio) and CD
modes.
. When the AF mode is set to “ON” in the user
setu\f menu mode, the AF indicator illuminates.
For activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
. Automatic switching function
This \bunction com\fares the strengths o\b the
signals o\b all the stations on the AF list and
selects the station with the o\ftimum rece\ftion
conditions.
. Program Information (PI) search
Program In\bormation (PI) search begins automati- cally i\b no suitable station is \bound with the above
automatic switching \bunction. The PI search
\bunction checks each RDS station with the same
PI code. During this time the sound is muted and
“PI SEARCH” is dis\flayed. The PI search o\fera-
tion sto\fs when a suitable station is \bound. I\b no
station is \bound once all the \brequencies have been
searched, the radio returns to the \frevious
\brequency.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being received, this enables
automatic retuning o\b other \freset stations on the
same network. Also, network linked services can
be used. The EON indicator turns on during the
rece\ftion o\b RDS EON stations in the FM mode.
RDS functions:
. Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, the RDS data is received and the
Program Service (PS) name is dis\flayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
When the radio receives PTY code 31 (an
emergency broadcast code) , the sound is inter-
ru\fted, the emergency broadcast is heard, and
“PTY31 ALARM” is dis\flayed. The volume level at
this time is the same as that \bor tra\b\bic announce-
ments. Once the emergency broadcast is \binished,
the unit immediately returns to the \frevious
source.
. REG (Regional) mode
Some local radio stations are linked together according to their region because they only o\b\ber
limited coverage due to their limited number o\b
transmitters. I\b the signal \brom one station be-
comes weak while you are driving around, RDS
mode will switch to another local station in the
region with a stronger signal.
When the REG mode is activated in the FM band
and the radio receiver is tuned to a local radio
station, it will kee\f receiving this radio station
without switching to another local station. For
activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
Traffic Announcement (TA):
. The TA \bunction o\ferates in the FM and CD
modes.
. The TA mode is turned on or o\b\b when the TA/
NEWS button is \fushed \bor less than 2 seconds.
. The TA mode o\ferates regardless o\b whether the
AF mode is on or o\b\b.
. “TA ON” is dis\flayed when the TA mode is turned
on, and the TA indicator turns on. “TA OFF” is
dis\flayed when the TA mode is turned o\b\b, and the
TA indicator turns o\b\b.
The \bollowing \bunctions o\ferate when the TA mode is
on:
. Traffic announcement interrupt function
When a tra\b\bic announcement is received, the
announcement is tuned in and the volume
increases to the set level.
Once the tra\b\bic announcement is \binished, the unit
returns to the source which was set be\bore the
tra\b\bic announcement started, and the volume
returns to the \frevious level. For EON stations,
the radio is interru\fted by another EON station
with tra\b\bic announcements.
The tra\b\bic announcement interru\ft mode is
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
cancelled if the TA/NEWS butt\fn is pushed
durin\b a traffic ann\funcement. The TA m\fde
returns t\f the standby m\fde and the audi\f unit
returns t\f the previ\fus s\furce.
News mode
When the NEWS butt\fn is pushed \fr the TA/NEWS
butt\fn is pushed f\fr l\fn\ber than 2 sec\fnds in the FM
m\fde, the news functi\fn is activated. “NEWS” is
displayed f\fr 3 sec\fnds and the NEWS indicat\fr
appears \fn the display.
When the news functi\fn is activated, the radi\f
receives a news c\fde fr\fm the FM br\fadcastin\b news
stati\fn and the actual playin\b m\fde will be interrupted.
Once the news br\fadcast is finished, the unit returns
t\f the previ\fus m\fde.
In s\fme c\funtries \fr re\bi\fns, this service is n\ft
available \fr the si\bnal is t\f\f weak t\f be received.
1. News standby mode
.The news standby m\fde can be activated in
the FM \fr CD m\fde.
.A news interrupti\fn will be ann\funced and“NEWS” will be displayed when the radi\f
detects the news c\fde fr\fm the tuned stati\fn
\fr EON stati\fns. The display will then chan\be
t\f the PS name \ff the interruptin\b stati\fn.
.When pushin\b the NEWS butt\fn \fr pushin\b
the TA/NEWS butt\fn f\fr l\fn\ber than 2
sec\fnds, the news standby m\fde is turned
\fff and the indicat\fr disappears fr\fm the
display.
2. News interruption mode
.When the NEWS butt\fn \fr the TA/NEWS
butt\fn is pushed durin\b the news interrupti\fn
m\fde, the radi\f returns t\f the previ\fus s\furce.
H\fwever, the news standby m\fde is kept.
.When thebutt\fn is pushed durin\b the
news interrupti\fn m\fde, the radi\f chan\bes t\f
the CD m\fde. H\fwever, the news standby
m\fde is kept.
If the radi\f band is chan\bed t\f the MW \fr LW,
the news standby m\fde will be turned \fff.
Heater and air conditioner, and audio system4-29
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-30Heater and air conditioner, and audio system
FM-AM RADIO WITH COMPACT DISC (CD) P\fAYER (Ty\be D)
JVH0011X
1. MUTE button
2. FM·AM radio band select button
3. CD button
4. Radio memory buttons
5. AUX button
6. CD EJECT button
7. DISP button
8. SEEK/TRACK/FI\fE button9. SCAN button
10. RDM (Random) button
11. RPT (Re\beat) button
12. Power button/Volume control knob
13. AUX IN (auxiliary in\but) jack
14. AUTO.P (Automatic Preset) button
15. SCR\f (Scroll) button
16. TUNE/FF (Forward)·REW (Rewind)/FO\fDER
button 17. MENU button
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Audio main operation
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
POWER button:
To turn on the audio system, push the Power button.
.The system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the PWR button.
Volume control:
To control the volume, turn the VOLUME control knob.
Turn the knob clockwise to make the sound louder.
Turn the knob counterclockwise to make the sound
quieter.
MENU button:
To change the audio settings, push the
button to
select the mode while the CD or radio is on.
Push the
button until the desired mode appears
on the display.
BASS ?TREBLE ?FADE ?BALA\bCE ?BEEP ?
CLOCK ?BASS
Push the SEEK/TRACK button (
or) or
TU\bE/FF·REW/FOLDER button (or) to
adjust the audio settings.
:( í) to decrease / (+) to increase
:(í) to decrease / (+) to increase
: (F) to front fade / (R) to rear fade
: (R) to right balance / (L) to left balance
Once the audio settings are set to the desired level, push the
button until the radio or CD display
appears.
If no action is performed for approximately 5 seconds,
the audio settings mode will automatically return to the
normal mode.
To turn the beep sound off or on, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonoruntil the desired
mode is displayed. This turns on or off the beep sound
when audio buttons are pushed.
Clock display:
To display the clock on the screen, perform the
following operations.
1. Push the
button repeatedly until CLOCK O\b
or OFF appears on the display while the audio
system is on.
2. Push the SEEK/TRACK button
oror
TU\bE/FF·REW/FOLDER buttonorto select CLOCK O\b.
Clock adjustment:
To adjust the clock, turn the clock display on and
perform the following operations.
1. Push the
button while CLOCK O\b is on the
display. The hour and minute digits blink.
2. To adjust the hours, push the SEEK/TRACK button
or.
3. To adjust the minutes, push the TU\bE/FF·REW/ FOLDER button
or.
If no user input is detected for 10 seconds, or when
the \fME\bU” button is pushed, the clock setting mode
will automatically return to the normal mode.
CD player operation
JVH0012X
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
Loading:
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playing, push the Power
button.
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
button:
When the
button is pushed while a CD is loaded,
the CD will start playing automatically.
button:
When the
button is pushed while a CD with a title
is being played, the display will change as follows:
Heater and air conditioner, and audio system4-31
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-32Heater and air conditioner, and audio system
CD:
CD with MP3 or WMA:
SEEK/TRACK/FILE button:
When the
\futton (lo\bated on the left side) is
pushed while a CD is \feing played, the present tra\bk
will \fe advan\bed and move to the next tra\bk. Push
the
\futton several times to skip forward tra\bks.
The CD will advan\be the num\fer of times the \futton is
pushed. When the last tra\bk of the CD is forwarded,
the first tra\bk will \fe played.
When the
\futton is pushed while a CD is \feing
played, the present tra\bk will start over from the
\feginning of the \burrent tra\bk. Push the
\futton
several times to skip \fa\bk tra\bks. The CD will rewind
the num\fer of times the \futton is pushed. When the
first tra\bk of the CD is rewound, the last tra\bk will \fe
played.
TUNE/FF·REW/FOLDER button:
When the
or\futton (lo\bated on the
right side) is pushed and held while a CD is \feing
played, the CD will \fe played while forwarding or
rewinding. When the \futton is released, the CD will
return to the normal play speed.
When the
\futton oris pushed while a
CD with MP3 or WMA is \feing played, the first tra\bk in
the next or the previous folder will \fe played.
button:
When the
\futton is pushed while a CD is \feing
played, the first 10 se\bonds of all the tra\bks will \fe
played.
When the
\futton is pushed again, the CD will
return to normal play from the tra\bk whi\bh is playing.
(Repeat) button:
To \bhange the play settings, push the
\futton to
sele\bt the mode.
CD:
RPT DISC ?RPT TRACK
CD with MP3 or WMA:
RPT DISC ?RPT FOLDER ?RPT TRACK
RPT DISC:
All the tra\bks of the CD will \fe played \bontinuously in
sequential order. The display indi\bates no sym\fol
mark. While the
\futton is pushed, the display
indi\bates “RPT DISC”.
RPT TRACK:
The sele\bted tra\bk of the CD will \fe played \bon-
tinuously. While the
\futton is pushed, the display
indi\bates “RPT TRACK”.
RPT FOLDER:
All the tra\bks of sele\bted folder will \fe played
\bontinuously in sequential order (CD with MP3 or
WMA only) . While the
\futton is pushed, the
display indi\bates “RPT FOLDER”.
(Random) button:
To \bhange the play sequen\be, push the
\futton to
sele\bt the mode.
CD:
RDM DISC ?RPT DISC
CD with MP3 or WMA:
RDM DISC ?RDM FOLDER ?RPT DISC
RPT DISC:
All the tra\bks of the CD will \fe played \bontinuously in
sequential order. The display indi\bates no sym\fol
mark. While the
\futton is pushed, the display
indi\bates “RPT DISC”.
RDM DISC:
All the tra\bks or folders (CD with MP3 or WMA only) of
the CD will \fe played \bontinuously in random order.
While the
\futton is pushed, the display indi\bates
“RDM DISC”.
RDM FOLDER:
All the tra\bks of the sele\bted folder will \fe played
\bontinuously in random order (CD with MP3 or WMA
only) . While the
\futton is pushed, the display
indi\bates “RDM FOLDER”.
(Scroll) button:
When the title is displayed \fut it is a long one, the
whole title is not shown in the display. In this \base,
push the \futton to s\broll the title. When the title is
s\brolled to the end of it, the display will stop moving
and return to the first \bondition.
&RQGLWLRQ