2012 RENAULT PULSE Owners Manual


> (GLW    0RGHO .$2(0B5HQDXOW @
SPA2406Type A (with panic alarm)
SPA2502Type B (without panic alarm)1. Intelligent Key \f2)
2. Mec\banical key \finside t\be Intelligent Key) \f2)
3. Key number plate
WARNING:
.Radio waves could adversely affect electric
medical equipment. Those who use a pace-
maker should contact the electric medical
equipment manufacturer for the possible
influences before use.
. The Intelligent Key transmits radio waves
when the buttons are pushed. The radio waves may affect aircraft navigation and
communication systems. Do not operate the
Intelligent Key while on an airplane. Make
sure the buttons are not operated uninten-
tionally when the unit is stored during a
flight.
T\be Intelligent Key system can operate all t\be door
\fincluding t\be back door) locks using t\be remote
controller function or pus\bing t\be request switc\b on
t\be ve\bicle wit\bout taking t\be key out from a pocket or
purse. T\be operating environment and/or conditions
may affect t\be Intelligent Key system operation.
Be sure to read t\be following before using t\be
Intelligent Key system.
CAUTION:
. Be sure to carry the Intelligent Key with you
when operating the vehicle.
. Never leave the Intelligent Key in the vehicle
when you leave the vehicle.
. When the outside temperature is extremely
low, the Intelligent Key system may not
function properly.
T\be Intelligent Key is always communicating wit\b t\be
ve\bicle as it receives radio waves. T\be Intelligent Key
system transmits weak radio waves. Environmental
conditions may interfere wit\b t\be operation of t\be
Intelligent Key system under t\be following operating
conditions.
. W\ben operating near a location w\bere strong
radio waves are transmitted, suc\b as a TV tower,
power station and broadcasting station.
. W\ben in possession of wireless equipment, suc\b
as a cellular telep\bone, transceiver, and CB radio. .
W\ben t\be Intelligent Key is in contact wit\b or
covered by metallic materials.
. W\ben any type of radio wave remote control is
used nearby.
. W\ben t\be Intelligent Key is placed near an electric
appliance suc\b as a personal computer.
. W\ben t\be ve\bicle is parked near a parking meter.
In suc\b cases, correct t\be operating conditions before
using t\be Intelligent Key function or use t\be mec\banical
key.
Alt\boug\b t\be life of t\be battery varies depending on t\be
operating conditions, t\be battery’s life is approximately
2 years. If t\be battery is disc\barged, replace it wit\b a
new one.
For information regarding replacement of a battery, see
“Intelligent key battery” \fP.8-25) .
Since t\be Intelligent Key is continuously receiving radio
waves, if t\be key is left near equipment w\bic\b transmits
strong radio waves, suc\b as signals from a TV and
personal computer, t\be battery life may become
s\borter.
To start t\be engine w\ben t\be Intelligent Key battery is
disc\barged, see “Pus\b-button ignition switc\b \fmodel
wit\b Intelligent Key system)” \fP.5-6) . Replace t\be
disc\barged battery wit\b a new one as soon as
possible.
Because t\be steering w\beel is locked electrically,
unlocking t\be steering w\beel wit\b t\be ignition switc\b in
t\be “LOCK” position is impossible w\ben t\be ve\bicle
battery is completely disc\barged. In t\bis case, unlock-
ing t\be steering w\beel would be also impossible. Pay
special attention t\bat t\be ve\bicle battery is not
completely disc\barged.
As many as 4 Intelligent Keys can be used wit\b one
ve\bicle. For information about t\be purc\base and use of
additional Intelligent Keys, contact a RENAULT dealer.
Pre-driving checks and adjustments3-9
INTELLIGENT KEY SYSTEM (if
equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-10Pre-driving checks and adjustments
CAUTION:
.Do not allow the Intelligent Key, which
contains electrical components, to come
into contact with water or salt water. This
could affect the system function.
. Do not drop the Intelligent Key.
. Do not strike the Intelligent Key sharply
against another object.
. Do not change or modify the Intelligent Key.
. Wetting may damage the Intelligent Key. If
the Intelligent Key gets wet, immediately
wipe until it is completely dry.
. If the outside temperature is below í108C
(148F) , the battery of the Intelligent Key may
not function properly.
. Do not place the Intelligent Key for an
extended period in an area where tempera-
tures exceed 608C (1408F) .
. Do not attach the Intelligent Key with a key
holder that contains a magnet.
. Do not place the Intelligent Key near equip-
ment that produces a magnetic field, such as
a TV, audio equipment and personal compu-
ters or cellular phones.
If an Intelligent Key is lost or stolen, \fENA\bLT
recommends erasing the ID code of that Intelligent
Key from the vehicle. This may prevent the unauthor-
ized use of the Intelligent Key to operate the vehicle.
For information regarding the erasing procedure,
contact a \fENA\bLT dealer.
The Intelligent Key function can be disabled. For
information about disabling the Intelligent Key function,
contact a \fENA\bLT dealer.
OPE\fATING \fANGE
SPA2038
The Intelligent Key functions can only be used when
the Intelligent Key is within the specified operating
range from the request switch
*1.
When the Intelligent Key battery is discharged or
strong radio waves are present near the operating
location, the Intelligent Key system’s operating range
becomes narrower, and the Intelligent Key may not
function properly.
The operating range is within 80 cm (31.50 in) from
each request switch
*1.
If the Intelligent Key is too close to the door glass,
handle or rear bumper the request switches may not
function.
When the Intelligent Key is within the operating range,
it is possible for anyone, even someone who does not
carry the Intelligent Key, to push the request switch
and lock/unlock the doors.
\bSING INTELLIGENT KEY SYSTEM
JVP0088X
The request switch will not function under the following
conditions:
. When the Intelligent Key is left inside the vehicle
. When the Intelligent Key is not within the
operational range
. When any door is open or not closed securely
. When the Intelligent Key battery is discharged
. When the ignition switch is in the “ACC” or “ON”
position
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SPA2407
.Do not push the door hand\fe request swit\bh with
the Inte\f\figent Key he\fd in your hand as i\f\fustrated.
The \b\fose distan\be to the door hand\fe wi\f\f \bause
the Inte\f\figent Key system to have diffi\bu\fty
re\bognizing that the Inte\f\figent Key is outside the
vehi\b\fe.
. After \fo\bking the doors using the door hand\fe
request swit\bh, make sure that the doors have
been se\bure\fy \fo\bked by operating the door
hand\fes.
. When \fo\bking the doors using the door hand\fe
request swit\bh, make sure to have the Inte\f\figent
Key in your possession before operating the door
hand\fe request swit\bh to prevent the Inte\f\figent
Key from being \feft in the vehi\b\fe.
. The door hand\fe request swit\bh is operationa\f on\fy
when the Inte\f\figent Key has been dete\bted by the
Inte\f\figent Key system.
. Do not pu\f\f the door hand\fe before pushing the
door hand\fe request swit\bh. The door wi\f\f be
un\fo\bked but wi\f\f not open. Re\fease the door
hand\fe on\be and pu\f\f it again to open the door.
Request swit\bh \fo\bations
JVP0095X
JVP0089X
When you \barry the Inte\f\figent Key with you, you \ban
\fo\bk or un\fo\bk a\f\f doors by pushing the door hand\fe
request swit\bh (driver’s or front passenger’s)
*Aor
ba\bk door request swit\bh*Bwithin the range of
operation.
When you \fo\bk or un\fo\bk the doors, the hazard
indi\bator wi\f\f f\fash as a \bonfirmation.
Lo\bking doors
1. Push the ignition swit\bh to the “OFF” position.
2. Carry the Inte\f\figent Key with you.
3. C\fose a\f\f doors.
4. Push the door hand\fe request swit\bh
*A(driver’s
or front passenger’s) or the ba\bk door request
swit\bh
*B.
5. A\f\f doors and the ba\bk door wi\f\f be \fo\bked.
6. The hazard indi\bator f\fashes on\be.
7. Operate door hand\fes to \bonfirm that the doors have been se\bure\fy \fo\bked.
Lockout protection:
To prevent the Inte\f\figent Key from being a\b\bidenta\f\fy
\fo\bked in the vehi\b\fe, \fo\bkout prote\btion is equipped
with the Inte\f\figent Key system.
. When the Inte\f\figent Key is \feft in the vehi\b\fe and
you try to \fo\bk the door using the driver’s inside
\fo\bk knob after getting out of the vehi\b\fe, a\f\f the
doors wi\f\f un\fo\bk automati\ba\f\fy and a \bhime wi\f\f
sound after the door is \b\fosed.
. When the Inte\f\figent Key is \feft in the vehi\b\fe whi\fe
the driver’s door is opened and you try to \fo\bk the
door using the power door \fo\bk swit\bh after
getting out of the vehi\b\fe, an inside warning \bhime
wi\f\f sound after the power door \fo\bk swit\bh or the
driver’s inside \fo\bk knob is operated.
CAUTION:
The lockout protection may not function under
the following conditions:
.When the Intelligent Key is placed on top of
the instrument panel.
Pre-driving checks and adjustments3-11
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-12Pre-driving checks and adjustments
.When the Intelligent Key is placed inside of
the glove box.
. When the Intelligent Key is placed inside of
the door pockets.
. When the Intelligent Key is placed on or
under the spare tire area.
. When the Intelligent Key is placed inside or
near metallic materials.
The lockout protection may function when the
Intelligent Key is outside the vehicle but is too
close to the vehicle.
Unlocking doors
All door unlock:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch
*Aor back
door reques\f swi\fch*B.
3. All doors and \fhe back door will be unlocked.
4. The hazard indica\for flashes \fwice.
If a door handle is pulled while unlocking \fhe doors,
\fha\f door may no\f be unlocked. Re\furning \fhe door
handle \fo i\fs original posi\fion will unlock \fhe door. If \fhe
door does no\f unlock, af\fer re\furning \fhe door handle,
push \fhe door handle reques\f swi\fch \fo unlock \fhe
door.
Selective door unlock mode:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch (driver’s or fron\f passenger’s)
*Aor back door reques\f
swi\fch*B.
3. The corresponding door will be unlocked. 4. Push \fhe door handle reques\f swi\fch (driver’s or
fron\f passenger’s)
*Aor back door reques\f
swi\fch*Bagain wi\fhin 5 seconds.
5. All doors will be unlocked.
Switching door unlock mode (if equipped) :
To swi\fch \fhe door unlock mode from one \fo ano\fher,
see “Using remo\fe keyless en\fry sys\fem” (P.3-7) .
Automatic relock:
All doors will be locked au\foma\fically unless one of \fhe
following opera\fions is performed wi\fhin 30 seconds
af\fer pushing \fhe reques\f swi\fch while \fhe doors are
locked.
. Opening any doors.
. Pushing \fhe igni\fion swi\fch.
If during \fhe prese\f \fime period \fhe “UNLOC\b”
bu\f\fon on \fhe In\felligen\f \bey is pushed, all doors will be
locked au\foma\fically af\fer \fhe nex\f prese\f \fime.
BATTERY SAVER SYSTEM
When all \fhe following condi\fions are me\f for a period
of \fime, \fhe ba\f\fery saver sys\fem will cu\f off \fhe power
supply \fo preven\f ba\f\fery discharge.
. The igni\fion swi\fch is in \fhe “ACC” posi\fion, and
. All doors are closed, and
. The selec\for lever is in \fhe “P” (Park) posi\fion
(Au\foma\fic \fransmission/Con\finuously Variable
Transmission model) .
WARNING AND AUDIBLE REMINDERS
The In\felligen\f \bey sys\fem is equipped wi\fh a func\fion
\fha\f is designed \fo minimize improper opera\fions of \fhe
In\felligen\f \bey and \fo help preven\f \fhe vehicle from
being s\folen.
Type A (model wi\fh vehicle informa\fion dis-
play)
The warning buzzer sounds and \fhe warning display
appears on \fhe do\f ma\frix display (in \fhe vehicle
informa\fion display) when improper opera\fions are
de\fec\fed. See \fhe \froubleshoo\fing guide on \fhe nex\f
page. For warning and indica\fors on \fhe vehicle
informa\fion display, see “Vehicle informa\fion display”
(P.2-20) .
CAUTION:
When the buzzer sounds and the warning
display appears, be sure to check both the
vehicle and the Intelligent Key.
Type B (model wi\fhou\f do\f ma\frix display)
A chime or beep sounds inside and ou\fside \fhe vehicle
and a warning ligh\f illumina\fes or blinks.
See \fhe \froubleshoo\fing guide on \fhe nex\f page and
“Warning/indica\for ligh\fs and audible reminders” (P.2-
12) .
In\felligen\f \bey sys\fem warning ligh\f:
P posi\fion selec\fing warning ligh\f:
CAUTION:
When the chime or beep sounds or the warning
light illuminates or blinks, be sure to check both
the vehicle and the Intelligent Key.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
TROUBLE SHOOTING GUIDE
SymptomPo\f\fibl\b cau\f\bAction to tak\b
Wh\bn pu\fhing th\b ignition \fwitch to \ftop
th\b \bngin\b Typ\b A: Th\b SHIFT P warning app\bar\f on
th\b di\fplay and th\b in\fid\b warning chim\b
\found\f continuou\fly or for a f\bw \f\bc-
ond\f.
Typ\b B: Th\b P po\fition \f\bl\bcting warning
light in th\b m\bt\br and th\b in\fid\b warning
chim\b \found\f continuou\fly (Automatic
Tran\fmi\f\fion and Continuou\fly Variabl\b
Tran\fmi\f\fion mod\bl\f) .
Th\b \f\bl\bctor l\bv\br i\f not in th\b “P” (Park)
po\fition.
Shift th\b \f\bl\bctor l\bv\br to th\b “P” (Park)
po\fition.
Wh\bn \fhifting th\b \f\bl\bctor l\bv\br to th\b P
(Park) po\fition. (Automatic Tran\fmi\f\fion
and Continuou\fly Variabl\b Tran\fmi\f\fion
mod\bl\f) Th\b in\fid\b warning chim\b \found\f con-
tinuou\fly.
Th\b ignition \fwitch i\f in th\b “ACC” or
“ON” po\fition.Pu\fh th\b ignition \fwitch to th\b “OFF”
po\fition.
Wh\bn op\bning th\b driv\br’\f door to g\bt
out of th\b v\bhicl\b Th\b in\fid\b warning chim\b \found\f con-
tinuou\fly.Th\b ignition \fwitch i\f in th\b “ACC”
po\fition.Pu\fh th\b ignition \fwitch to th\b “OFF”
po\fition.
Wh\bn clo\fing th\b door aft\br g\btting out
of th\b v\bhicl\b Typ\b A: Th\b NO KEY warning app\bar\f on
th\b di\fplay, th\b out\fid\b chim\b \found\f 3
tim\b\f and th\b in\fid\b warning chim\b
\found\f for a f\bw \f\bcond\f.
Typ\b B: Th\b Int\bllig\bnt K\by \fy\ft\bm
warning light in th\b m\bt\br blink\f in y\bllow,
th\b out\fid\b chim\b \found\f 3 tim\b\f and
th\b in\fid\b warning chim\b \found\f for a
f\bw \f\bcond\f.
Th\b ignition \fwitch i\f in th\b “ACC” or
“ON” po\fition.
Pu\fh th\b ignition \fwitch to th\b “OFF”
po\fition.
Typ\b A: Th\b SHIFT P warning app\bar\f on
th\b di\fplay and th\b out\fid\b chim\b \found\f
continuou\fly.
Typ\b B: Th\b P po\fition \f\bl\bcting warning
light in th\b m\bt\br illuminat\b\f and th\b
out\fid\b chim\b \found\f continuou\fly
(Automatic Tran\fmi\f\fion and Continu-
ou\fly Variabl\b Tran\fmi\f\fion mod\bl\f) . Th\b ignition \fwitch i\f in th\b “ACC” or
“OFF” po\fition and th\b \f\bl\bctor l\bv\br i\f
not in th\b “P” (Park) po\fition.
Mov\b th\b \f\bl\bctor l\bv\br to th\b “P” (Park)
po\fition and pu\fh th\b ignition \fwitch to
th\b “OFF” po\fition.
Pre-driving checks and adjustments3-13
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-14Pre-driving checks and adjustments
SymptomPossible cause\fction to take
W\ben pus\bing t\be request switc\b or t\be
“LOCK”
button on t\be Intelligent
Key to lock t\be door T\be outside c\bime sounds for a few
seconds and all t\be doors unlock.T\be Intelligent Key is inside t\be ve\bicle. Carry t\be Intelligent Key wit\b you.
T\be ignition switc\b is in t\be “\fCC” or
“ON” position.
Pus\b t\be ignition switc\b to t\be “OFF”
position.
\f door is not closed securely. Close t\be door securely.
W\ben pus\bing t\be door \bandle request
switc\b to lock t\be door T\be outside c\bime sounds for a few
seconds.T\be Intelligent Key is inside t\be ve\bicle. Carry t\be Intelligent Key wit\b you.
\f door is not closed securely.
Close t\be door securely.
W\ben pus\bing t\be ignition switc\b to start
t\be engine Type \f: T\be Intelligent Key battery
indicator appears on t\be display.
Type B: T\be Intelligent Key system
warning lig\bt in t\be meter blinks in green.
T\be battery c\barge is low.
Replace t\be battery wit\b a new one. (See
“Battery” (P.8-23) .)
Type \f: T\be NO KEY warning appears on
t\be display and t\be inside warning c\bime
sounds for a few seconds.
Type B: T\be Intelligent Key system
warning lig\bt in t\be meter blinks in yellow
and t\be inside warning c\bime sounds for
a few seconds. T\be Intelligent Key is not in t\be ve\bicle.
Carry t\be Intelligent Key wit\b you.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
USING REMOTE KEYLESS ENTRY FUNC-
TION
Oper\ftin\b r\fn\be
SPA2252Type A (with panic alarm)
SPA2045Type B (without panic alarm)It is possible to lock/unlock \fll doors includin\b the b\fck
door usin\b the remote keyless entry system. The
oper\ftin\b dist\fnce depends upon the conditions
\fround the vehicle. To securely oper\fte the lock \fnd
unlock buttons, \fppro\fch the vehicle to \fbout 1 m (3.3
ft) from the door.
The remote keyless entry system will not function under
the followin\b conditions:.
When the Intelli\bent Key is not within the
oper\ftion\fl r\fn\be.
. When the Intelli\bent Key b\fttery is disch\fr\bed.
For inform\ftion re\b\frdin\b the repl\fcement of \f b\fttery,
see “B\fttery” (P.8-23) .
Lockin\b doors
When you lock or unlock the doors includin\b the b\fck
door, the h\fz\frd indic\ftor will fl\fsh \fs \f confirm\ftion.
1. Pl\fce the i\bnition switch in the “OFF” position \fnd c\frry the Intelli\bent Key.
2. Close \fll doors (includin\b the b\fck door) .
3. Push the “LOCK”
button*1on the
Intelli\bent Key.
4. All doors will be locked.
5. Oper\fte the door h\fndles to confirm th\ft the doors h\fve been securely locked.
CAUTION:
After locking the doors using the Intelligent Key,
be sure that the doors have been securely
locked by operating the door handles.
Unlockin\b doors
1. Push the “UNLOCK”button*2on the
Intelli\bent Key.
2. All doors (includin\b the b\fck door) will be unlocked.
All doors will be locked \futom\ftic\flly unless one of the
followin\b oper\ftions is performed within 30 seconds
\ffter pushin\b the “UNLOCK”
button on the
Intelli\bent Key while the doors \fre locked. If durin\b this
30-second time period, the “UNLOCK”
button on
the Intelli\bent Key is pushed, \fll doors will be locked
\futom\ftic\flly \ffter \fnother 30 seconds. .
Openin\b \fny door or b\fck door.
. Pushin\b the i\bnition switch.
Selecting door unlock mode (if equipped) :
When you first receive the vehicle, the door unlock
mode is set to unlock \fll the doors with one push of the
“UNLOCK”
button*2. The door unlock mode
c\fn be switched to the selective door unlock mode,
which unlocks the p\fssen\ber’s doors \ft the second
push of the “UNLOCK”
button*2
Selective door unlock mode:
1. Push the “UNLOCK”
button*2on the
Intelli\bent Key.
2. The driver’s door unlocks.
3. Push the “UNLOCK”
button*2on the
Intelli\bent Key \f\b\fin.
4. All doors will be unlocked.
To switch to the selective door unlock mode, perform
the followin\b procedure.
Push the “LOCK”
\fnd “UNLOCK”buttons
simult\fneously for more th\fn 5 seconds. Perform the
s\fme procedure to de\fctiv\fte the selective door
unlock mode.
. When the selective door unlock mode is set, the
h\fz\frd indic\ftor fl\fshes 3 times.
. When the \fll door unlock mode is set, the h\fz\frd
indic\ftor fl\fshes once.
Pre-driving checks and adjustments3-15
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-16Pre-driving checks and adjustments
Using panic alarm (if eq\fipped)
If \bo\f are near \bo\fr vehicle and feel threatened, \bo\f
ma\b activate the alarm to call attention as follows:
1. P\fsh the “PANIC”
b\ftton*3on the
Intelligent Ke\b for more than 0.5 second.
2. The theft warning alarm will sta\b on for 25 seconds.
3. The panic alarm stops when:
. It has r\fn for 25 seconds, or
. An\b of the b\fttons on the Intelligent Ke\b are
p\fshed. (Note: Panic b\ftton sho\fld be p\fshed for
more than 0.5 second.)
Hazard indicator operation
When \bo\f lock or \fnlock the doors, the hazard
indicator will flash as a confirmation.
.“LOCK”: The hazard indicator flashes once.
. “UNLOCK”: The hazard indicator flashes twice. Yo\fr vehicle is eq\fipped with either or both of the
following sec\frit\b s\bstems:
.
Theft warning s\bstem
. Anti-Theft S\bstem*
(* immobilizer)
The sec\frit\b condition will be shown b\b the sec\frit\b
indicator light.
THEFT WARNING SYSTEM
The theft warning s\bstem provides vis\fal and a\fdio
alarm signals if parts of the vehicle are dist\frbed.
Sec\frit\b indicator light
SIC2045
The sec\frit\b indicator light is located in the meter
panel.
This light operates whenever the ignition switch is in
the “ACC”, “OFF” or “LOCK” position. This is normal.
How to activate the system:
1. Close all windows and p\fsh the ignition switch to the “OFF” position.
The system can be activated even if the
windows are open. 2. Carr\b the Intelligent Ke\b with \bo\f and get o\ft of
the vehicle.
3. Make s\fre the hood is closed. Close and lock all doors with the door handle req\fest switch, LOCK
b\ftton*1on the Intelligent Ke\b (If the door
is locked \fsing the inside lock knob, the s\bstem
will not be activated) or power door lock switch (If
the door is locked \fsing the power door lock
switch with all the doors closed, the s\bstem will
not be activated. To activate the s\bstem, lock the
door \fsing the power door lock switch with an\b of
the doors open, then close all the doors) .
4. Confirm that the sec\frit\b indicator light comes on. The sec\frit\b indicator light sta\bs on for approxi-
matel\b 30 seconds. The vehicle sec\frit\b s\bstem is
now pre-armed. After approximatel\b 30 seconds
the vehicle sec\frit\b s\bstem a\ftomaticall\b shifts
into the armed phase. The sec\frit\b light begins to
flash once ever\b approximatel\b 3 seconds.
If, d\fring this 30-second pre-arm time period, the
door is \fnlocked with the door handle req\fest
switch, the “UNLOCK”
b\ftton*2on the
Intelligent Ke\b, the power door lock switch, or the
ignition switch is p\fshed to the “ACC” or “ON”
position, the s\bstem will not arm.
Even when the driver and/or passengers are in
the vehicle, the system will activate with all
doors locked and ignition switch in the “LOCK”
position. Push the ignition switch to the “ACC” or
“ON” position to turn the system off.
Theft warning system operation:
The warning s\bstem will give the following alarm:
. The hazard indicator blinks and the horn so\fnds
intermittentl\b for approximatel\b 30 seconds.
SECURITY SYSTEM (if equipped)
&RQGLWLRQ