2012 RENAULT PULSE Owners Manual


> (GLW    0RGHO .$2(0B5HQDXOW @
Audio main operation
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
POWER button:
To turn on the audio system, push the Power button.
.The system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the Power button.
Volume control:
To control the volume, turn the VOL control knob.
Turn the knob clockwise to make the sound louder.
Turn the knob counterclockwise to make the sound
quieter.
MENU button:
To change the audio settings (BASS, TREBLE,
FADER, BALA\bCE, BEEP and CLOCK) , push the
button to select the mode while the CD or radio is
on.
Push the
button until the desired mode appears
on the display.
BASS ?TREBLE ?FADE ?BALA\bCE ?BEEP
O\b ?CLOCK
Audio setting
Push the SEEK/TRACK button (
or) or
TU\bE/FF·REW/FOLDER button (or) to
adjust while the following audio setting is displayed.
:( í) to decrease / (+) to increase
:(í) to decrease / (+) to increase
: (F) to front fade / (R) to rear fade
: (R) to right balance / (L) to left balance
Once the audio settings are set to the desired level,
push the
button until the radio or CD display
appears.
If no action is performed for approximately 5 seconds,
the audio settings mode will automatically return to the
normal mode.
Beep setting
To turn the beep sound off or on, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonoruntil the desired mode
is displayed. This turns on or off the beep sound when
audio buttons are pushed.
Clock setting
To display the clock on the screen, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonorto select CLOCK O\b.
1. Turn the clock display on.
2. Push the
button while CLOCK O\b is on the
display. The hour and minute digits blink.
3. To adjust the hours, push the SEEK/TRACK button
or.
4. To adjust the minutes, push the TU\bE/FF·REW/ FOLDER button
or.
If no user input is detected for 10 seconds, or when
the \fME\bU” button is pushed, the clock setting mode
will automatically return to the normal mode.
CD player operation
SAA3123
The audio system operates when the ignition switch is
in the \fACC” or \fO\b” position.
Loading:
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playing, push the Power
button.
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
button:
When the
button is pushed while a CD is loaded,
the CD will start playing automatically.
button:
When the
button is pushed while a CD with a title
is being played, the display will change as follows:
Heater and air conditioner, and audio system4-17
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-18Heater and air conditioner, and audio system
CD:
CD with MP3 or WMA:
SEEK/TRACK button:
Whe\f the
butto\f is \bushed while a CD is bei\fg
\blayed, the \brese\ft track will be adva\fced a\fd move to
the \fext track. Push the
butto\f several times to
ski\b forward tracks. The CD will adva\fce the \fumber
of times the butto\f is \bushed. Whe\f the last track of
the CD is forwarded, the first track will be \blayed.
Whe\f the
butto\f is \bushed while a CD is bei\fg
\blayed, the \brese\ft track will start over from the
begi\f\fi\fg of the curre\ft track. Push the
butto\f
several times to ski\b back tracks. The CD will rewi\fd
the \fumber of times the butto\f is \bushed. Whe\f the
first track of the CD is rewou\fd, the last track will be
\blayed.
TUNE/FF·REW/FOLDER button:
Whe\f the
orbutto\f is \bushed a\fd held while
a CD is bei\fg \blayed, the CD will be \blayed while
forwardi\fg or rewi\fdi\fg. Whe\f the butto\f is released,
the CD will retur\f to the \formal \blay s\beed.
Whe\f the
orbutto\f is \bushed while a CD
with MP3 or WMA is bei\fg \blayed, the first track i\f the
\fext or the \brevious folder will be \blayed.
button:
Whe\f the
butto\f is \bushed while a CD is bei\fg
\blayed, the first 10 seco\fds of all the tracks will be
\blayed.
Whe\f the
butto\f is \bushed agai\f, the CD will
retur\f to \formal \blay from the track which is \blayi\fg.
(Repeat) button:
To cha\fge the \blay setti\fgs, \bush the
butto\f to
select the mode.
CD:
RPT DISC ?RPT TRACK
CD with MP3 or WMA:
RPT DISC ?RPT FOLDER ?RPT TRACK
RPT DISC:
All the tracks of the CD will be \blayed co\fti\fuously i\f
seque\ftial order. The dis\blay i\fdicates \fo symbol
mark. While the
butto\f is \bushed, the dis\blay
i\fdicates “RPT DISC”.
RPT TRACK:
The selected track of the CD will be \blayed co\f-
ti\fuously. While the
butto\f is \bushed, the dis\blay
i\fdicates “RPT TRACK”.
RPT FOLDER:
All the tracks of selected folder will be \blayed
co\fti\fuously i\f seque\ftial order (CD with MP3 or
WMA o\fly) . While the
butto\f is \bushed, the
dis\blay i\fdicates “RPT FOLDER”.
(Random) button:
To cha\fge the \blay seque\fce, \bush the
butto\f to
select the mode.
CD:
RDM DISC ?RPT DISC
CD with MP3 or WMA:
RDM DISC ?RDM FOLDER ?RPT DISC
RPT DISC:
All the tracks of the CD will be \blayed co\fti\fuously i\f
seque\ftial order. The dis\blay i\fdicates \fo symbol
mark. While the
butto\f is \bushed, the dis\blay
i\fdicates “RPT DISC”.
RDM DISC:
All the tracks or folders (CD with MP3 or WMA o\fly) of
the CD will be \blayed co\fti\fuously i\f ra\fdom order.
While the
butto\f is \bushed, the dis\blay i\fdicates
“RDM DISC”.
RDM FOLDER:
All the tracks of the selected folder will be \blayed
co\fti\fuously i\f ra\fdom order (CD with MP3 or WMA
o\fly) . While the
butto\f is \bushed, the dis\blay
i\fdicates “RDM FOLDER”.
MUTE button:
Press the
butto\f to \bause the track.
CD EJECT button:
To eject a CD, \bush the CD EJECT
butto\f.
Whe\f the
butto\f is \bushed twice, the CD will be
ejected further, a\fd the CD ca\f be removed with ease.
If a CD is ejected by \bushi\fg the
butto\f, a\fd it is
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
not taken out from the loading slot, the CD \fill
automatically be reloaded to the slot to \brotect the CD
(12 cm discs only) .
AUX button:
The AUX IN jack is located on the audio unit. The AUX
IN audio in\but jack acce\bts any standard analog audio
in\but such as from a \bortable cassette ta\be, CD \blayer,
MP3 \blayer or la\bto\b com\buters.
Push the AUX button to \blay a com\batible device \fhen
it is \blugged into the AUX IN jack.
CAUTION:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display. .
For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio o\beration
SAA3123
The audio system o\berates \fhen the ignition s\fitch is
in the “ACC” or “ON” \bosition.
/button:
When the
/button is \bushed \fhile the audio
system is off, the audio system \fill turn on and the
radio \fill turn on.
When the
/button is \bushed \fhile another
audio source is \blaying, the another audio source \fill
turn off and the radio \fill turn on.
To change the radio bands, \bush the
/button
until the desired band (FM1, FM2, AM) is dis\blayed.
The FM stereo indicator, “ST” \fill dis\blay during FM
stereo rece\btion. When the stereo broadcast signal is
\feak, the radio \fill automatically change from stereo
to monaural rece\btion.
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station frequency
manually, \bush the
orbutton until the desired
frequency is achieved.
When adjusting the broadcasting station frequency
automatically, \bush the
orbutton. When the
system detects a broadcasting station, it \fill sto\b at
the station.
SEEK UP/DOWN button:
When adjusting the broadcasting station frequency
automatically, \bush the
button. When the
system detects a broadcasting station, it \fill sto\b at
the station.
button:
When the
button is \bushed, the system \fill seek
and sto\b at the detected broadcasting station for 5
seconds, and then it \fill start to seek for the next
broadcasting station.
Push the
button in this 5-second \beriod to sto\b
seeking.
Radio memory button:
The audio system can store u\b to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
To store the station frequency:
1. Tune to the desired broadcasting station fre- quency by using the
orbutton.
2. Push and hold a memory button (1 - 6) until a bee\b sounds.
Heater and air conditioner, and audio system4-19
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-20Heater and air conditioner, and audio system
3. The switch number \fnd frequenc\b will \fppe\fr onthe displ\f\b when the memor\b is stored properl\b.
4. Perform steps 1 - 3 for \fll other memor\b buttons.
Push \f memor\b button (1 - 6) to select \f desired
memor\b.
If the b\ftter\b c\fble is disconnected, or if the \fudio fuse
blows, the r\fdio memor\b will be er\fsed. In such \f c\fse,
reset the desired st\ftions.
(Automatic Preset) button:
The \fudio s\bstem c\fn store up to 6 FM st\ftion
frequencies \fnd 6 AM st\ftion frequencies.
To store the st\ftion frequenc\b \futom\ftic\fll\b, push \fnd
hold the
button until \f beep sounds. The st\ftion
will be \futom\ftic\fll\b stored in the “AUTO.P” memor\b.
The displ\f\b indic\ftes “AP-**”.
Push the
button to select \f desired memor\b.
MUTE button:
Press the
button to mute the sound. Press \fg\fin
to restore the sound.
FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (T\bpe B)
JVH0060X
1. MUTE button
2. FM r\fdio b\fnd select button
3. AM r\fdio b\fnd select button
4. CD button
5. AUX button
6. CD EJECT button
7. Sound preference button
8. SEEK/TRACK button 9. TUNE/FF (Forw\frd)·REW (Rewind)/FOLDER
button
10. SCAN button
11. RDM (R\fndom) button
12. Power button/VOL (Volume) control knob
13. AUX IN (\fuxili\fr\b input) j\fck
14. RPT (Repe\ft) button
15. AUTO.P (Autom\ftic Preset) button
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
16. Radio memory buttons (1 - 6\f
17. ME\bU button
Audio main operation
The audio system operates when the ignition switch is
in the “ACC” or “O\b” position.
POWER button:
To turn on the audio system, push the Power button.
.The system will turn on in the mode, (radio or CD\f
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the Power button.
Volume control:
To control the volume, turn the VOL control knob.
Turn the knob clockwise to make the sound louder.
Turn the knob counterclockwise to make the sound
quieter.
Sound preference button:
To enter the audio mode (radio, CD or AUX\f , push the
button. When no CD is loaded and AUX is not
connected , the audio system will automatically switch
to the radio mode.
To change the audio settings (BASS, TREBLE,
FADER, BALA\bCE\f , push the
button to select
the mode.
BASS ?TREBLE ?BALA\bCE ?FADER ?BASS
To adjust each audio setting, push the SEEK/TRACK
button or Tune button. BASS: (í\f to decrease / (+\f to increase
TREB(LE\f: (í\f to decrease / (+\f to increase
BAL
(A\bCE\f:
(R\f to right balance / (L\f to left balance
FADE(R\f: (F\f to front fade / (R\f to rear fade
If the audio settings mode is unchanged for approxi-
mately 8 seconds, the audio settings mode will
automatically return to the normal mode.
MENU button:
To change the audio settings (BEEP and CLOCK\f ,
push the
button to select the mode while the CD
or radio is on.
Push the
button until the desired mode appears
on the display.
BEEP O\b ?CLOCK
To turn the beep sound off or on, push the SEEK/
TRACK button
oror TU\bE/FF·REW/
FOLDER buttonoruntil the desired mode
is displayed. This turns on or off the beep sound when
audio buttons are pushed.
Clock display:
To display the clock on the screen, perform the
following operations.
1. Push the
button repeatedly until CLOCK O\b
or OFF appears on the display while the audio
system is on.
2. Push the SEEK/TRACK button
oror
TU\bE/FF·REW/FOLDER buttonorto
select CLOCK O\b. Clock adjustment:
To adjust the clock, turn the clock display on and
perform the following operations.
1. Push the
button while CLOCK O\b is on the
display. The hour and minute digits blink.
2. To adjust the hours, push the SEEK/TRACK button
or.
3. To adjust the minutes, push the TU\bE button
or.
If no user input is detected for 10 seconds, or when
the “ME\bU” button is pushed, the clock setting mode
will automatically return to the normal mode.
CD player operation
JVH0002X
The audio system operates when the ignition switch is
in the “ACC” or “O\b” position.
Loading:
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playing, push the Power
button.
Heater and air conditioner, and audio system4-21
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-22Heater and air conditioner, and audio system
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
button:
When the
button is pushed while a C\f is loaded,
the C\f will start playin\b automatically.
SEEK/TRACK button:
When the
button is pushed while a C\f is bein\b
played, the present track will be advanced and move to
the next track. Push the
button several times to
skip forward tracks. The C\f will advance the number
of times the button is pushed. When the last track of
the C\f is forwarded, the first track will be played.
When the
button is pushed while a C\f is bein\b
played, the present track will start over from the
be\binnin\b of the current track. Push the
button
several times to skip back tracks. The C\f will rewind
the number of times the button is pushed. When the
first track of the C\f is rewound, the last track will be
played.
TUNE/FF·REW/FOLDER button:
When the
orbutton is pushed and held while
a C\f is bein\b played, the C\f will be played while
forwardin\b or rewindin\b. When the button is released,
the C\f will return to the normal play speed.
button:
When the
button is pushed while a C\f is bein\b
played, the first 10 seconds of all the tracks will be
played.
When the
button is pushed a\bain, the C\f will
return to normal play from the track which is playin\b.
(Repeat) button:
To chan\be the play settin\bs, push the
button to
select the mode.
C\f:
RPT \fISC ?RPT TRACK
All the tracks of the C\f will be played continuously in
sequential order. The display indicates no symbol
mark. While the
button is pushed, the display
indicates “RPT \fISC”.
RPT TRACK:
The selected track of the C\f will be played con-
tinuously. While the
button is pushed, the display
indicates “RPT TRACK”.
(Random) button:
To chan\be the play sequence, push the
button to
select the mode.
C\f:
R\fM \fISC ?RPT \fISC
All the tracks of the C\f will be played continuously in
sequential order. The display indicates no symbol
mark. While the
button is pushed, the display
indicates “RPT \fISC”.
R\fM \fISC:
All the tracks of the C\f will be played continuously in random order. While the
button is pushed, the
display indicates “R\fM \fISC”.
MUTE button:
Press the
button to pause the track.
CD EJECT button:
To eject a C\f, push the C\f EJECT
button.
If a C\f is ejected by pushin\b the
button, and it is
not taken out from the loadin\b slot, the C\f will
automatically be reloaded to the slot to protect the C\f
(12 cm discs only) .
AUX button:
The AUX IN jack is located on the audio unit. The AUX
IN audio input jack accepts any standard analo\b audio
input such as from a portable cassette tape, C\f player,
MP3 player or laptop computers.
Push the AUX button to play a compatible device when
it is plu\b\bed into the AUX IN jack.
WARNING:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio operation
JVH0002X
\fhe audio s\bstem operates when the ignition switch is
in the “ACC” or “ON” position.
/button:
When the
/button is pushed while the audio
s\bstem is off, the audio s\bstem will turn on and the
radio will turn on.
When the
/button is pushed while another
audio source is pla\bing, the another audio source will
turn off and the radio will turn on.
\fo change the radio bands, push the
/button
until the desired band (FM1, FM2, or AM) is displa\bed.
\fhe FM stereo indicator, “S\f” will displa\b during FM
stereo reception. When the stereo broadcast signal is
weak, the radio will automaticall\b change from stereo
to monaural reception.
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station frequenc\b
manuall\b, push the
orbutton until the desired
frequenc\b is achieved.
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
orbutton. When the
s\bstem detects a broadcasting station, it will stop at
the station.
SEEK UP/DOWN button:
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
button. When the
s\bstem detects a broadcasting station, it will stop at
the station.
button:
When the
button is pushed, the s\bstem will seek
and stop at the detected broadcasting station for 5
seconds, and then it will start to seek for the next
broadcasting station.
Push the
button in this 5-second period to stop
seeking.
Radio memory button:
\fhe audio s\bstem can store up to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
\fo store the station frequenc\b:
1. \fune to the desired broadcasting station fre- quenc\b b\b using the
orbutton.
2. Push and hold a memor\b button (1 - 6) until a beep sounds.
3. \fhe switch number and frequenc\b will appear on the displa\b when the memor\b is stored properl\b.
4. Perform steps 1 - 3 for all other memor\b buttons.
Push a memor\b button (1 - 6) to select a desired
memor\b.
If the batter\b cable is disconnected, or if the audio fuse
blows, the radio memor\b will be erased. In such a case,
reset the desired stations.
(Automatic Preset) button:
\fhe audio s\bstem can store up to 6 FM station
frequencies and 6 AM station frequencies.
\fo store the station frequenc\b automaticall\b, push and
hold the
button until a beep sounds. \fhe station
will be automaticall\b stored in the “AU\fO.P” memor\b.
\fhe displa\b indicates “AP-**”.
Heater and air conditioner, and audio system4-23
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-24Heater and air conditioner, and audio system
Push thebutton to select a desired memor\f.
MUTE button:
Press the
button to mute the sound. Press again
to restore the sound.
F\b-A\b RADIO WITH CO\bPACT DISC (CD) PLAYER (T\fpe C)
JVH0003X
1. Sound preference button
2. TA (Traffic Announcement)/NEWS button
3. F\b·A\b band select button
4. CD button
5. AUX button
6. CD EJECT button
7. \bENU button
8. SEEK/TRACK button 9. TUNE button
10. ENTER button
11. PHONE END/BACK button
12. POWER ON/OFF button/VOLU\bE control
knob
13. AUX IN (auxiliar\f input) jack
14. PHONE SEND button
15. PHONE BOOK button
&RQGLWLRQ