Page 1298 of 3229

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Fluid Level CheckI6 3.2L
Petrol
General Procedures W ARNING: Observe due care when drai ning, as  the flui d can be very hot .
Ens ure t hat  the aut omat ic trans mi s si on is  in 'P' and t he handbrake is
ful ly appli ed.
1.
Remove t he air cleaner hous ing.
Refer t o:  Air Cleaner  (303-12B Intake Ai r Dis tribut ion and Fil tering -
TD4 2.2L Dies el, Removal  and Inst all ati on).
2.
Clean t he area around the trans mi s si on fl uid fil ler plug.
3. Remove t he transmis si on fluid fil ler plug.
4.
5.  W ARNING: Do not work on or under a vehi cle s upported onl y
by a jack. Al ways  support  t he vehi cl e on s afet y s tands .
• NOTE: Make s ure that t he vehi cl e is  st andi ng on a level  s urface.
Rais e and s upport  t he vehi cl e.
5.
Remove t he front  unders hiel d.
Refer t o:  Engi ne Unders hi eld  (501-02 Front  End Body Panel s ,
Removal and Ins tall ati on).
6.
Clean t he area around the trans mi s si on fl uid l evel  plug.
7.
Place a contai ner under the t rans mi ss i on.
8.
Lower the vehicle.
9.
Add 0.5 li tres of trans mi s si on fl uid.
10.
11.  CAUTION: A new O-ring s eal is  t o be ins tall ed.
Inst all  t he transmis si on fluid fil ler plug.
T orque:  40 Nm 11.
Inst all  t he air cleaner hous ing.
12. 
     
        
        Page 1300 of 3229

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Fluid Drain and RefillI6
3.2L Petrol
General Procedures W ARNING: Observe due care when drai ning, as  the flui d can be very hot .
Ens ure t hat  the aut omat ic trans mi s si on is  in 'P' and t he handbrake is
ful ly appli ed.
1.
Remove t he air cleaner hous ing.
Refer t o:  Air Cleaner  (303-12B Intake Ai r Dis tribut ion and Fil tering -
TD4 2.2L Dies el, Removal  and Inst all ati on).
2.
Clean t he area around the trans mi s si on fl uid fil ler plug.
3. Remove t he transmis si on fluid fil ler plug.
4.
5.  W ARNING: Do not work on or under a vehi cle s upported onl y
by a jack. Al ways  support  t he vehi cl e on s afet y s tands .
• NOTE: Make s ure that t he vehi cl e is  st andi ng on a level  s urface.
Rais e and s upport  t he vehi cl e.
5.
Remove t he front  unders hiel d.
Refer t o:  Engi ne Unders hi eld  (501-02 Front  End Body Panel s ,
Removal and Ins tall ati on).
6.
Clean t he area around the trans mi s si on fl uid l evel  and drai n plugs .
7.
Place a contai ner under the t rans mi ss i on.
8. 
     
        
        Page 1303 of 3229

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Fluid Level CheckTD4
2.2L Diesel
General Procedures W ARNING: Observe due care when drai ning, as  the flui d can be very hot .
Ens ure t hat  the aut omat ic trans mi s si on is  in 'P' and t he handbrake is
ful ly appli ed.
1.
Clean t he area around the trans mi s si on fl uid fil ler plug.
2. Remove t he transmis si on fluid fil ler plug.
3.
4.  W ARNING: Do not work on or under a vehi cle s upported onl y
by a jack. Al ways  support  t he vehi cl e on s afet y s tands .
• NOTE: Make s ure that t he vehi cl e is  st andi ng on a level  s urface.
Rais e and s upport  t he vehi cl e.
4.
Remove t he front  unders hiel d.
Refer t o:  Engi ne Unders hi eld  (501-02 Front  End Body Panel s ,
Removal and Ins tall ati on).
5.
Clean t he area around the trans mi s si on fl uid l evel  plug.
6.
Place a contai ner under the t rans mi ss i on.
7.
Lower the vehicle.
8.
Add 0.5 li tres of trans mi s si on fl uid.
9.
10.  CAUTION: A new O-ring s eal is  t o be ins tall ed.
Inst all  t he transmis si on fluid fil ler plug.
T orque:  40 Nm 10.
Connect  t he Land Rover approved diagnos t ic equipment. St art  and
run the engine.
11.
Us ing t he diagnos ti c equi pment  t o moni tor t he transmis s ion fluid
t emperature, al low the t emperat ure t o reach 60 degrees  C.
12. 
     
        
        Page 1305 of 3229
Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Fluid Drain and RefillTD4
2.2L Diesel
General Procedures W ARNING: Observe due care when drai ning, as  the flui d can be very hot .
Ens ure t hat  the aut omat ic trans mi s si on is  in 'P' and t he handbrake is
ful ly appli ed.
1.
Clean t he area around the trans mi s si on fl uid fil ler plug.
2. Remove t he transmis si on fluid fil ler plug.
3.
4.  W ARNING: Do not work on or under a vehi cle s upported onl y
by a jack. Al ways  support  t he vehi cl e on s afet y s tands .
• NOTE: Make s ure that t he vehi cl e is  st andi ng on a level  s urface.
Rais e and s upport  t he vehi cl e.
4.
Remove t he front  unders hiel d.
Refer t o:  Engi ne Unders hi eld  (501-02 Front  End Body Panel s ,
Removal and Ins tall ati on).
5.
Clean t he area around the trans mi s si on fl uid l evel  and drai n plugs .
6.
Place a contai ner under the t rans mi ss i on.
7. 
     
        
        Page 1308 of 3229

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Selector Shaft SealI6 3.2L Petrol
Removal  and Inst all ati on
Removal
• NOTE: Removal  s t eps  in t his  procedure may cont ain i nst all ati on det ail s.
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport  t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he transmis si on cont rol  module (TCM).
Refer t o: Transmis s ion Control Modul e (TCM) - I6 3.2L Petrol (307-01Automat ic Transmis si on/Trans axl e, Removal  and Ins t allat ion).
3.
4. CAUTIONS:
 Take extra care not  t o damage t he mati ng faces .
 "Make s ure t hat a new component  i s ins t al led. "
4.
Installation
1. CAUTIONS:
 Make s ure that  t he mat ing faces  are clean and free of foreignmat eri al .
 Ins tall  t he s eal , fl ush wit h t he transmis s ion case.
To i nst all , revers e t he removal procedure.
1. 
     
        
        Page 1309 of 3229

Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Selector Shaft SealTD4 2.2L Diesel
Removal  and Inst all ati on
Removal
• NOTE: Removal  s t eps  in t his  procedure may cont ain i nst all ati on det ail s.
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport  t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he transmis si on cont rol  module (TCM).
Refer t o: Transmis s ion Control Modul e (TCM) - TD4 2.2L Di es el(307-01 Automat ic Trans mi s si on/Trans axl e, Removal andInst all at ion).
3.
4. CAUTIONS:
 Take extra care not  t o damage t he mati ng faces .
 "Make s ure t hat a new component  i s ins t al led. "
4.
Installation
1. CAUTIONS:
 Make s ure that  t he mat ing faces  are clean and free of foreignmat eri al .
 Ins tall  t he s eal , fl ush wit h t he transmis s ion case.
To i nst all , revers e t he removal procedure.
1. 
     
        
        Page 1310 of 3229
Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Control Module (TCM)I6
3.2L Petrol
Removal  and Inst all ati on
Removal
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport  t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he A/C compress or mounti ng bracket .
Refer t o: Acces sory Dri ve Component  Bracket (303-05A Access oryDrive - I6 3.2L Pet rol , Removal and Ins t al lat ion).
3.
Releas e and dis connect the sel ect or l ever cable.4.
Releas e t he s upport  bracket.5. 
     
        
        Page 1312 of 3229
Publi s hed: 11-May-2011
Automatic Transmission/Transaxle - Transmission Control Module
(TCM)TD4 2.2L Diesel
Removal  and Inst all ati on
Removal
1. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport  t he vehi cl e.
1.
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -General Informat ion, Specificati ons).
2.
Remove t he air cleaner as s embly.
Refer t o: Air Cleaner (303-12A Intake Ai r Dis tribut ion and Fil tering -I6 3.2L Pet rol, Removal and Ins t al lat ion).
3.
Releas e and dis connect the sel ect or l ever cable.4.
Remove t he transmis si on s elector lever.5.