2004 MITSUBISHI ENDEAVOR Battery terminal positive

[x] Cancel search: Battery terminal positive

Page 2227 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 158: Measuring Voltage Between Terminal No.10 And Ground
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
The measured value should be approximately 12 volts (battery 
positive voltage).  
Q: D

Page 2235 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Q: Is the refrigerant temperature switch operating properly?
  
YES:
 Go to Step 19.  
NO:
 Replace the refrigerant temperature switch. Check that the air 
conditioning works normally.  
STEP 19. Chec

Page 2252 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 181: Measuring Voltage Between Terminal 1 And Ground
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
The measured value should be approx. 12 volts (battery positive 
voltage).  
Q: Is the meas

Page 2256 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 185: Locating Connector C
-202
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
3. Measure the voltage between terminal 1 and ground. 
The measured value should be approximately 12 volts (batte

Page 2260 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 188: Locating Connector C
-202
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
2. Measure the voltage between terminal 5 and ground. 
The measured value should be approximately 12 volts (batte

Page 2305 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Follow the table below to check the defogger relay for continuity. DEFOGGER RELAY CONTINUITY
 
Q: Is the defogger relay in good condition?
  
YES:
 Go to Step 4.  
NO:
 Replace the defogger relay. The

Page 2307 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 222: Locating Connector F
-01 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
4. Measure the voltage between terminal 1 and ground. 
The measured value should be approximately 12 volts (battery

Page 2309 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 224: Locating Connector C
-201
 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
2. Measure the voltage between terminal 5 and ground. 
The measured value should be approximately 12 volts (batte