2001 TOYOTA SEQUOIA side step

BO46Y±01
H16753
Side Door Step
Plate Cover
Step Cover
Protector
Step Plate
Side Step Bracket
No. 3 Side Step Bracket
No. 2 Side Step Bracket
No. 1 Side Step Bracket Step Cover
Protector
N´m (kgf´cm, ft´lbf) : Specified torque
19 (195, 14)
19 (195, 14)
19 (195, 14)
19 (195, 14)
4.9 (50, 43 in.´lbf)
4.9 (50, 43 in.´lbf)
4.9 (50, 43 in.´lbf)
4.9 (50, 43 in.´lbf)
± BODYSIDE STEP
BO±109
3662 Author: Date:
2005 SEQUOIA (RM1146U)
SIDE STEP
COMPONENTS

BO47S±02
AB0152
SST BO±166
± BODYSEAT BELT PRETENSIONER
3719 Author: Date:
2005 SEQUOIA (RM1146U)
DISPOSAL
HINT:
When scrapping vehicle equipped with a SRS or disposing of
a front seat outer belt (with seat belt pretensioner), always first
deploy the airbag in accordance with the procedure given in RS
section or activate the seat belt pretensioner. If any abnormality
occurs with the airbag deployment or seat belt pretensioner ac-
tivation, contact the SERVICE DEP. of the TOYOTA MOTOR
SALES, U.S.A. INC. When disposing of a front seat outer belt
(with seat belt pretensioner) activated in a collision, follow the
same procedure given in step 1±(d) in ºDISPOSALº.
CAUTION:

Never dispose of front seat outer belt which has inac-
tivated pretensioner.

The seat belt pretensioner produces a sizeable ex-
ploding sound when it activates, so perform the op-
eration out±of±door and where it will not create a nui-
sance to nearby residents.

When activating the seat belt pretensioner, always
use the specified SST. (SRS Airbag Deployment Tool)
Perform the operation in a place away from electrical
noise.
SST 09082±00700, 09082±00740

When activating a front seat outer belt (with seat belt
pretensioner), perform the operation at least
10 m (33 ft) away from the front seat outer belt.

Use gloves and safety glasses when handling a front
seat outer belt with activated pretensioner.

Always wash your hands with water after completing
the operation.

Do not apply water, etc. to a front seat outer belt with
activated pretensioner.

05_SEQUOIA_U (L/O 0408)
21
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
To unlock: Push the ªUNLOCKº switch
once to unlock the driver 's door alone.
Pushing the switch twice within 3 seconds
unlocks all the side doors and back door
simultaneously. Each time the ªUNLOCKº
switch is pushed, two beeps will be heard,
and the parking lights and tail lights flash
twice.
This double switch operation to unlock all
the side doors and back door can be
changed to a single switch operation. For
details, contact your Toyota dealer.
When all the side doors and back door
are unlocked simultaneously with a wire-
less remote control transmitter, the interior
light, luggage compartment light, ignition
switch light and foot light come on for
about 15 seconds before fading out, even
if the door is not opened. (For details, see
ªCenter interior and personal lightsº on
page 150, ªCenter interior lightº on page
151, ªLuggage compartment lightº on page
152 and ªIgnition switch lightº on page
152 in Section 1±5.)
You have 30 seconds to open a door after
using the wireless remote unlock feature.
If a door is not opened by then, all the
side doors and back door will be automati-
cally locked again.The timing for the automatic door lock
function can be changed. For details, con-
tact your Toyota dealer.
If the ªLOCKº or ªUNLOCKº switch is kept
pressed in, the locking or unlocking opera-
tion is not repeated. Release the switch
and then push again.
The wireless door locking or unlocking
function can be erased. For details, con-
tact your Toyota dealer.
SWITCHING BEEP SOUND ON AND OFF
You can switch the beep on and off. (The
beep is on initially and after battery re-
placement.)
To switch the beep on and off:
With the driver 's door openedÐ
1. Insert the ignition key and remove it.
2. Within 5 seconds, insert the ignition
key again and turn it to the ªONº posi-
tion.
3. After 10 seconds, push the same
ªLOCKº, ªUNLOCKº, ªPANICº switch or
back window open button twice within
10 seconds.
Two beep sounds inform you that the
program has been switched on or off.
If this procedure is not followed exactly,
the beep will not operate as expected.Check the beep ON/OFF operation by
pushing the transmitter switch after you
finish this procedure. If the beep does not
operate as expected, repeat this proce-
dure from step 1.

05_SEQUOIA_U (L/O 0408)
28
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)

To set function (d)
Push and hold the rear of the driver's
side power door lock switch for 5 sec-
onds with the selector lever in any
position except ªPº.
All the side doors and back door automati-
cally lock and unlock when you release
the power door lock switch. This indicates
that the function is set. If all the doors do
not lock and unlock, the time the switch
was held may have been too short or too
long. Perform the procedure over again
starting from step 1.
If you want to cancel a function, repeat
the procedure. Each time you perform the
procedure, the function is set or can-
celled.Window lock
switch
Driver's door switches
Front passenger's door switch
OPERATING FROM INSIDE
The windows can be operated with the
switch on each side door.
The power windows work when the ignition
switch is in the ªONº position.
Key off operation: If both front doors are
closed, they work for 43 seconds even
after the ignition switch is turned off. They
stop working when either front side door
is opened.
OPERATING THE DRIVER'S AND FRONT
PASSENGER'S WINDOWS
Use the switches on the driver's door
and front passenger 's door.
Normal operation: The window moves as
long as you hold the switch.
To open: Lightly push down the switch.
To close: Lightly pull up the switch.
If you push in the window lock switch on
the driver 's door, the passenger 's window
cannot be operated.
Power windows

05_SEQUOIA_U (L/O 0408)
71
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
This system can memorize the position
of the driver's seat and outside rear
view mirrors, and recall them at the
touch of a button.
Buttons ª1º and ª2º can memorize two
separate positions.
SETTING THE DRIVING POSITION
The key must be in the ªONº position and
the shift lever is in the ªPº position.
1. Adjust the driver 's seat and outside
rear view mirrors to the desired
position.
2. While pushing the ªSETº button,
push button ª1º or ª2º until a beep
is heard.
The system can memorize up to 2 posi-
tions by repeating the above steps. If step
2 is performed when both buttons ª1º and
ª2º are memorized, the previous position
will be erased and a new position will be
set.To make only slight changes to an already
memorized position, the easiest way is to
first activate the memorized position, then
make the desired changes and perform
step 2 above.
Driving position memory
system

05_SEQUOIA_U (L/O 0408)
215
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
Compact disc player
Use this button to skip up or down to a
different track.
Push ª
º or ªº side of the ªSEEK/
TRACKº button until the number of the
track you want to listen to appears on the
display. If you want to return to the begin-
ning of the current track, quickly push the
down side of the button one time.
Vehicles with rear seat entertainment sys-
temÐ
While the DVD player is in operation, the
chapter or track can be changed by push-
ing the ª
º or ªº side of the ªSEEK/
TRACKº button.
ST (Stereo reception) display
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. ªSTº appears on the display. If the
signal becomes weak, the radio reduces
the amount of channel separation to prev-
ent the weak signal from creating noise.
If the signal becomes extremely weak, the
radio switches from stereo to mono recep-
tion.
TA P E
Push the ªTAPEº button to play a cassette
tape.TEXT
This button is used to change the display
for the compact disc that contains text
data.
To change the display, quickly push and
release the ªTEXTº button while the com-
pact disc is playing. The display changes
in the order from the elapsed time to disc
title to track title, then back to the
elapsed time.
If this button is pushed while a compact
disc that does not contain text data is
playing, ªNO TITLEº will appear on the
display.
If the entire disc or track title does not
appear on the display, push and hold the
button until you hear a beep. The rest of
the title will appear.
TUNE (Tuning)
Turn the ªTUNEº knob clockwise to step
up the frequency. Turn the knob counter-
clockwise to step down the frequency.

05_SEQUOIA_U (L/O 0408)
230
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
CONTROLLER FEATURES
1. ª
º and ªº (DISC/CH/PROG) buttons
2. ª
º and ªº (TUNE/TRACK) buttons
3. ªON/SOURCEº button
4. ªOFFº button1. ª
º and ªº (DISC/CH/PROG) but-
tons
Radio
You can scan only the preset stations for
the band of the front audio system. (For
instructions, see ªÐControls and featuresº
on page 211 in this Section.)
To scan the preset stations:
Push the ª
º or ªº (DISC/CH/PROG)
button. The radio will tune in the next
preset station up or down the band. The
station frequency will appear on the dis-
play.
Cassette tape player
Push the ª
º or ªº (DISC/CH/PROG)
button to select the other side of a cas-
sette tape. The display indicates which
side is currently selected. (ª
º indicates
t he top si de, ª
º indicates the bottom
side.)
Auto±reverse feature: After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.Compact disc player with changer
Use these buttons to select a disc you
want to listen to.
Push the ª
º or ªº (DISC/CH/PROG)
button until the number of the disc you
want to listen appears on the display.
2. ª
º and ªº (TUNE/TRACK) buttons
Radio
Push the ª
º or ªº (TUNE/TRACK) but-
ton to tune or seek.
Tuning:
Quickly push and release the ª
º or ªº
(TUNE/TRACK) button. Each time you
push the button, the radio will step up or
down to another frequency. If you push
and hold the button, and the radio will go
into the seek mode.
Seeking:
Push and hold the ª
º or ªº (TUNE/
TRACK) button. The radio will seek up or
down for a station of the nearest frequen-
cy and will stop on reception. Each time
you push the button, the stations will be
searched one after another.

05_SEQUOIA_U (L/O 0408)
246
2005 SEQUOIA from Aug. '04 Prod. (OM34424U)
2. ªº and ªº (TUNE/TRACK) buttons
Radio
Push the ª
º or ªº (TUNE/TRACK) but-
ton to tune or seek.
Tuning:
Quickly push and release the ª
º or ªº
(TUNE/TRACK) button. Each time you
push the button, the radio will step up or
down to another frequency. If you push
and hold the button, and the radio will go
into the seek mode.
Seeking:
Push and hold the ª
º or ªº (TUNE/
TRACK) button. The radio will seek up or
down for a station of the nearest frequen-
cy and will stop on reception. Each time
you push the button, the stations will be
searched one after another.
Cassette tape player
This button has the following featuresÐ
To fast forward or reverse:
Push and hold the ª
º (TUNE/TRACK)
button until ªFFº will appears on the dis-
play to forward a tape. Push and hold the
ª
º (TUNE/TRACK) button until ªREWº
appears on the display to rewind a tape.To stop the tape while it is fast forward-
ing, push the ª
º (TUNE/TRACK) button.
To stop the tape while it is rewinding,
push the ª
º (TUNE/TRACK) button.
If a tape rewinds completely, the cassette
player will stop and then play that same
side. If a tape fast forwards completely,
the cassette will play the other side of the
tape using the auto±reverse feature.
To skip up or down to locate a song or
recording:
You can select up to nine recordings (in-
cluding current one).
Push the ª
º or ªº (TUNE/TRACK) but-
ton. ªFF 1º or ªREW 1º will appear on the
screen.
Next, push either side of the track button
until the number on the screen reaches
the number of tracks you want to skip. If
you push the button 10 times, the skip
feature will be turned off.
For the skip feature to work correctly a
blank space of at least 3 seconds is con-
sidered to be a start of a recording.
When a beginning of a tape is reached,
the player automatically resumes play.
When the end of the tape is reached, the
player automatically reverses sides and
resumes normal play.In addition, the feature may not work well
with some spoken, live, or classical re-
cordings.
Compact disc player
This button has the following featuresÐ
To skip up or down to a different track:
Push the ª
º or ªº (TUNE/TRACK) but-
ton until the number of the track you want
to listen to appears on the display. If you
want to return to the beginning of the
current track, quickly push the ª
º
(TUNE/TRACK) button one time.
To fast forward or reverse:
Push and hold the ª
º or ªº (TUNE/
TRACK) button to fast forward or reverse
within a compact disc. When you release
the button, the compact disc player will
resume playing.