2001 TOYOTA SEQUOIA fuel pressure

DIDIJ±01
± DIAGNOSTICSAUTOMATIC TRANSMISSION
DI±517
711 Author: Date:
2005 SEQUOIA (RM1146U)
TOYOTA PART AND SYSTEM NAME LIST
This reference list indicates the part names used in this manual along with their definitions.
Part and system nameDefinition
Toyota HCAC system, Hydrocarbon adsorptive Catalyst
(HCAC) system, HC adsorptive three±way catalystHC adsorptive three±way catalytic converter
Variable Valve Timing sensor, VVT sensorCamshaft position sensor
Variable valve timing system, VVT systemCamshaft timing control system
Camshaft timing oil control valve, Oil control valve OCV,
VVT, VSVCamshaft timing oil control valve
Variable timing and lift, VVTLCamshaft timing and lift control
Crankshaft position sensor ºAºCrankshaft position sensor
Engine speed sensorCrankshaft position sensor
THAIntake air temperature
Knock control moduleEngine knock control module
Knock sensorEngine knock sensor
Mass or volume air flow circuitMass air flow sensor circuit
Vacuum sensorManifold air pressure sensor
Internal control module, Control module, Engine control
ECU, PCMPower train control module
FC idleDeceleration fuel cut
Idle air control valveIdle speed control
VSV for CCV, Canister close valve VSV for canister controlEvaporative emissions canister vent valve
VSV for EVAP, Vacuum switching valve assembly No. 1,
EVAP VAV, Purge VSVEvaporative emissions canister purge valve
VSV for pressure switching valve, Bypass VSVEvaporative emission pressure switching valve
Vapor pressure sensor, EVAP pressure sensor, Evaporative
emission control system pressure sensorFuel tank pressure sensor
Charcoal canisterEvaporative emissions canister
ORVR systemOn±board refueling vapor recovery system
Intake manifold runner controlIntake manifold tuning system
Intake manifold runner valve, IMRV, IACV (runner valve)Intake manifold tuning valve
Intake control VSVIntake manifold tuning solenoid valve
AFSAir fuel ratio sensor
O2 sensorHeater oxygen sensor
Oxygen sensor pumping current circuitOxygen sensor output signal
Oxygen sensor reference ground circuitOxygen sensor signal ground
Accel position sensorAccelerator pedal position sensor
Throttle actuator control motor, Actuator control motor, Elec-
tronic throttle motor, Throttle control motorElectronic throttle actuator
Electronic throttle control system, Throttle actuator control
systemElectronic throttle control system
Throttle/pedal position sensor, Throttle/pedal position switch,
Throttle position sensor/switchThrottle position sensor
Turbo press sensorTurbocharger pressure sensor
Turbo VSVTurbocharger pressure control solenoid valve
P/S pressure switchPower±steering pressure switch
VSV for ACMActive control engine mount
Speed sensor, Vehicle speed sensor ºAº, Speed sensor for
skid control ECUVehicle speed sensor
ATF temperature sensor, Trans. fluid temp. sensor, ATF
temperature sensor ºAºTransmission fluid temperature sensor
Electronic controlled automatic transmission, ECTElectronically controlled automatic
Intermediate shaft speed sensor ºAºCounter gear speed sensor

DIDJ2±01
± DIAGNOSTICSAUTOMATIC TRANSMISSION
DI±567
761 Author: Date:
2005 SEQUOIA (RM1146U)
FAIL±SAFE CHART
1. FAIL±SAFE
This function minimizes the loss of the ECT functions when any malfunction occurs in a sensor or solenoid.
Malfunction PartFunction
Output Speed Sensor (SP2)During an output speed sensor malfunction, shift control is effected through the
input speed sensor signal (NT).
ATF Temp. Sensor No. 1During an ATF temperature sensor No. 1 malfunction, up±shift to the 5th and flex
lock±up clutch control are prohibited.
Shift Solenoid Valve S1, S2 and SR
The current to the failed solenoid valve is cut off and control is effected by operating
the other solenoid valves with normal operation.
Shift control is effected depending on the failed solenoid as described in the table
on the next page.
Shift Solenoid Valve SL1 and SL2During a solenoid valve SL1 or SL2 malfunction, up±shift to the 5th is prohibited.
Shift Solenoid Valve SLU
During a solenoid valve SLU malfunction, the current to the solenoid valve is
stopped. This stops lock±up control and flex lock±up control, fuel economy de-
creases.
Shift Solenoid Valve SLT
During a solenoid valve SLT malfunction, the current to the solenoid valve is
stopped. This stops line pressure optimal control, the shift shock increases. How-
ever, shifting is effected through normal clutch pressure control.
Fail Safe Function:
If either of the shift solenoid valve circuits has an open or short failure, the ECM turns the other shift solenoid
ºONº and ºOFFº in order to shift into the gear positions shown in the table below.
In case of a short circuit, the ECM stops sending current to the short circuited solenoid.
Even if starting the engine again in the fail±safe mode, the gear position remains in the same position.

DID8P±01
I28566
Seat Position
Control ECU
A/C ECU (Integration
Control Panel) BEANBody ECU
Back Door ECU
ECM
Light Control
Rheostat
Vehicle Speed
Sensor
Oil Pressure
Sender Gauge
Fuel Sender Gauge
Seat Inner
Belt Switch
Park/neutral
Position Switch
Turn Signal
Flasher Relay
Washer Level SensorKey Unlock
Warning Switch
Door Courtesy
Lamp Switch
Parking Brake Switch
Transponder
Key ECU
4WD Control ECU
Airbag Sensor
Center ECU Combination
Meter
Skid Control ECU
Suspension
Control ECU
Translate ECU
Overhead Module
(Garage Door
Opener)BEAN
BEAN
BEAN
BEAN
BEAN BEAN
± DIAGNOSTICSCOMBINATION METER SYSTEM
DI±1605
1799 Author: Date:
2005 SEQUOIA (RM1146U)
SYSTEM DIAGRAM

DID8Q±01
DI±1608
± DIAGNOSTICSCOMBINATION METER SYSTEM
1802 Author: Date:
2005 SEQUOIA (RM1146U)
SYSTEM DESCRIPTION
1. METER GAUGE AND WARNING/INDICATOR
GAUGE:
ItemDetail
SpeedometerVehicle speed sensor (Direct line).
TachometerECM transmits engine speed to the meter to display.
ODO/TRIP MeterCombination meter assy.
FuelDisplays a fuel level according to a signal from the fuel sender gauge (Direct line).
Water TemperatureDisplays engine coolant temperature according to a signal from the ECM (BEAN).
Oil PressureReceives a signal from the oil pressure sender (Direct line).
Volt MeterDisplays vehicle voltage according to a voltage from the IG terminal (Direct line).
WARNING/INDICATOR:
HINT:
Combination meter bulb check is performed for 3 seconds after the ignition switch is turned ON.
ItemDetailList of indicators available for
bulb check
O/D OFFReceives a signal from the ECM (Direct line)±
TURNTurns signal switch ON (Direct line)±
BEAMReceives a signal from the body ECU (*1), Displays a signal received from the
dimmer switch (*2) (Direct line)±
SECURITYReceives a set signal from the transponder key ECU and body ECU (Direct line)±
CHARGEReceives a malfunction signal from the alternator (Direct line)
AIR BAGReceives a malfunction signal from the airbag sensor center (Direct line)
D SEAT BELTReceives the driver seat belt signal (Unfastened) from the seat belt inner front LH
(Direct line)±
DOOROpen door indicator comes on when a signal is received from the ECU (BEAN)
from each door±
A/T OIL TEMP.Warning is displayed when the oil temperature is high (Direct line)
BRAKEComes on when the parking brake switch is on or the brake fluid level warning
switch is on (Direct line)
MIL (CHECK ENGINE)Receives a malfunction signal from the ECM (Direct line)
FUEL WARNINGReceives the fuel empty signal from the fuel sender gauge (Direct line)±
ABSReceives a malfunction signal from the skid control ECU (Direct line)
WASHERWarning is displayed when the washer level is low (Direct line)±
CRUISEReceives a CRUISE on signal or malfunction signal from the ECM (Direct line)±
VSC TRACReceives a malfunction signal from the skid control ECU (Direct line)
VSC (TRAC) OFFReceives a malfunction signal from the translate ECU (Direct line)
SLIPReceives a malfunction signal from the translate ECU (Direct line)
4HIReceives a 4HI signal from the 4WD control ECU (Direct line)±
CTR DIF LOCKReceives a DIF LOCK signal from the 4WD control ECU (Direct line)±
A/T PReceives a P signal from the park/neutral position switch (Direct line)±
A/T NReceives an N signal from the park/neutral position switch (Direct line)±
A/T DReceives a D signal from the park/neutral position switch (Direct line)±
A/T 3Receives a 3 signal from the park/neutral position switch (Direct line)±
A/T 2Receives a 2 signal from the park/neutral position switch (Direct line)±
A/T LReceives an L signal from the park/neutral position switch (Direct line)±

DID8S±01
/ /
/ /
COMBINATION METER SYSTEM Check Sheet
Inspector 's name:
Customer 's NameVIN
Production Date
Licence Plate No.
Date Vehicle
Brought InOdometer Readingkm
miles
Weather Conditions
When Problem
OccurredFrequency Problem Occurs
Weather
Outside temperature Constantly  Sometimes ( times per day, month)
 Once only Date Problem First Occurred
 Fine  Cloudy  Rainy  Snowy
 Various/Others
 Hot  Warm  Cool
 Cold (Approx. 5F ( 5C))
Problem Symptom
Gauge

Malfunction in speedometer

Malfunction in tachometer

Malfunction in engine coolant temperature receiver gauge

Malfunction in fuel receiver gauge

Entire combination meter does not operate

Buzzer does not sound (Key reminder warning, Seat belt warning)

Seat belt warning for driver's seat does not operate
Others

Operating light control rheostat does not change light brightness

















Malfunction in oil pressure receiver gauge

Malfunction in volt meter DI±1612
± DIAGNOSTICSCOMBINATION METER SYSTEM
1806 Author: Date:
2005 SEQUOIA (RM1146U)
CUSTOMER PROBLEM ANALYSIS CHECK

DID8U±01
DI±1614
± DIAGNOSTICSCOMBINATION METER SYSTEM
1808 Author: Date:
2005 SEQUOIA (RM1146U)
PROBLEM SYMPTOMS TABLE
HINT:
Inspect the related ºFuseº and ºRelayº before confirming the suspected area as shown in the table below.
MALFUNCTION SYSTEM:
SymptomSuspected AreaSee page
Entire combination meter does not operate.Refer to troubleshooting proceduresDI±1628
Operating light control rheostat does not change light brightness.Refer to troubleshooting proceduresDI±1645
Seat belt warning does not operate.Refer to troubleshooting proceduresDI±1650
Key reminder warning buzzer does not sound.
1. Multiplex communication system
2. Key unlock warning switch circuit
3. Door courtesy lamp switch circuit
4. Combination meter assyDI±1892
DI±1715
DI±1728
IN±35
METER GAUGES:
SymptomSuspected AreaSee page
Malfunction in speedometerRefer to troubleshooting proceduresDI±1632
Malfunction in tachometerRefer to troubleshooting proceduresDI±1636
Malfunction in fuel receiver gaugeRefer to troubleshooting proceduresDI±1640
Malfunction in engine coolant temperature receiver gaugeRefer to troubleshooting proceduresDI±1644
Malfunction in oil pressure receiver gaugeRefer to troubleshooting proceduresDI±1654
Malfunction in volt meterRefer to troubleshooting proceduresDI±1658
WARNING LIGHTS:
SymptomSuspected AreaSee page
Check engine warning light (MIL) does not come on.
1. ECM
2. Wire harness or connector
3. Combination meter assyDI±9
±
IN±35
Discharge warning light does not come on.
1. ECM
2. Wire harness or connector
3. Combination meter assyDI±9
±
IN±35
Brake warning light does not come on.
1. Skid control ECU
2. Wire harness or connector
3. Combination meter assyDI±895
±
IN±35
ABS warning light does not come on.
1. Skid control ECU
2. Wire harness or connector
3. Combination meter assyDI±895
±
IN±35
SRS warning light does not come on.
1. Airbag sensor assy
2. Wire harness or connector
3. Combination meter assyDI±1126
±
IN±35
Open door warning light does not come on.
1. Door courtesy light switch circuit
2. Wire harness or connector
3. Combination meter assy
4. Body ECUDI±1728
±
IN±35
IN±35
Fuel level warning light does not come on.
1. Refer to troubleshooting
2. Wire harness or connector
3. Combination meter assyDI±1640
±
IN±35
Low oil pressure warning light does not come on.
1. Low oil pressure warning switch
2. Wire harness or connector
3. Combination meter assyBE±55
±
IN±35

DI±1618
± DIAGNOSTICSCOMBINATION METER SYSTEM
1812 Author: Date:
2005 SEQUOIA (RM1146U) C5±19 ± Body ground
G±B ± Body
groundA/T shift position signal
(L)A/T L indicator ON10 to 14 V
C5±20 ± Body groundGR±L ± Body
groundTire pressure signalTire pressure warning light ON6.7 to 12 V
C5±20 ± Body groundGR±L ± Body
groundTire pressure signalTire pressure warning light OFFBelow 1 V
C5±21 ± Body groundR ± Body groundInjector signalIgnition switch ONPulse generation
C5±22 ± Body groundW±G ± Body
groundIllumination signalLight control switch OFFBelow 1 V
C5±22 ± Body groundW±G ± Body
groundIllumination signalLight control switch ON10 to 14 V
C5±23 ± Body groundY±G ± Body
groundTachometer signalEngine runningPulse generation
(see waveform 1)
C5±24 ± Body groundY ± Body groundSpeed signal (Input)Ignition switch ON and turn the
wheel slowly10 to 14 V e
Below 1 V
C5±25 ± Body groundG±O ± Body
groundSpeed signal (Output)Ignition switch ON and turn the
wheel slowlyPulse generation
(see waveform 2)
C5±26 ± Body groundV ± Body groundPower source for fuel
sender gaugeIgnition switch ON, fuel level is
FULLBelow 1 V
C5±26 ± Body groundV ± Body groundPower source for fuel
sender gaugeIgnition switch ON, fuel level is
EMPTY4 to 7 V
C5±27 ± Body groundL±B ± Body
groundOil pressure signalOil pressure warning light ONBelow 1 V
C5±27 ± Body groundL±B ± Body
groundOil pressure signalOil pressure warning light OFF10 to 14 V
C5±28 ± Body groundB±R ± Body
groundInjector power signalIgnition switch ON10 to 14 V
C5±29 ± Body groundB±Y ± Body
groundSRS warning light signalSRS warning light ONBelow 1 V
C5±29 ± Body groundB±Y ± Body
groundSRS warning light signalSRS warning light OFF8 to 14 V
C5±33 ± Body groundG±Y ± Body
groundTurn signal (R)Ignition switch ON, turn signal RH
indicator OFFBelow 1 V
C5±33 ± Body groundG±Y ± Body
groundTurn signal (R)Ignition switch ON, turn signal RH
indicator ON10 to 14 V
C5±34 ± Body groundL±Y ± Body
groundA/T shift position signal
(P)A/T P indicator OFFBelow 1 V
C5±34 ± Body groundL±Y ± Body
groundA/T shift position signal
(P)A/T P indicator ON10 to 14 V
C5±35 ± Body groundB±Y ± Body
groundA/T shift position signal
(R)A/T R indicator OFFBelow 1 V
C5±35 ± Body groundB±Y ± Body
groundA/T shift position signal
(R)A/T R indicator ON10 to 14 V
C5±36 ± Body groundG±R ± Body
groundA/T shift position signal
(N)A/T N indicator OFFBelow 1 V
C5±36 ± Body groundG±R ± Body
groundA/T shift position signal
(N)A/T N indicator ON10 to 14 V
C5±37 ± Body groundW±R ± Body
groundA/T shift position signal
(D)A/T D indicator OFFBelow 1 V

I27708
C5±31
C5±32
(*1) C5±30
C5±25
C5±24
C6±10
C5±23
C5±28
C5±21
C5±4
C5±29
C5±26
C6±11
C6±12
C5±22 C5±27
CPU
Supply CircuitC5±6
C5±5
C6±23
HEAD (*2)
OIL MAINT
DOOR
ILL
AIRBAG
D±BELT
FUEL WARNIG
C5±3
HI
N
LO
MAN.
BRAKE C6±16
C6±15
C6±14
C6±13
C5±1
*1: w/ Driving Position Memory *2: USA *3: Canada
TAIL (*3)
ONE STEP
DIMMER Buzzer
LCD
Speedometer
Tachometer
Fuel Gauge
Engine Coolant Temperature
Receiver Gauge
Oil Pressure Gauge
Volt Gauge DI±1622
± DIAGNOSTICSCOMBINATION METER SYSTEM
1816 Author: Date:
2005 SEQUOIA (RM1146U)
COMBINATION METER INNER CIRCUIT