2001 TOYOTA AVALON lock

BE1E5-01
I12539
Master Switch
Driver Side Junction Block

ECU ACC Fuse
Mirror Assembly

Mirror Motor
- BODY ELECTRICALPOWER MIRROR CONTROL SYSTEM
BE-1 13
1717 Author
: Date
:
2001 AVALON (RM808U)
POWER MIRROR CONTROL SYSTEM
LOCATION

BE1DG-01
I13484
Ignition Switch
Driver Side Junction Block

PWR - OUTLET Fuse (No.1,2)
Power Outlet Main Switch
Power Point Relay
Power Outlet Socket
Power Outlet Main SwitchPower Point Relay
Driver Side Junction Block

PWR - OUTLET Fuse (No.1,2)
Ignition Switch
Power Outlet Socket
Floor shift vehicle:
Column shift vehicle:
- BODY ELECTRICALPOWER OUTLET
BE-13
1617 Author
: Date
:
2001 AVALON (RM808U)
POWER OUTLET
LOCATION

BE1DF-01
I12522
Relay Block No.8Engine Room
Junction Block
Relay Block No.7
Instrument Panel Junction Block
- BODY ELECTRICALPOWER SOURCE
BE-9
1613 Author
: Date
:
2001 AVALON (RM808U)
POWER SOURCE
LOCATION

I12519
1. MAIN Fuse - 40 A
2. RDI Fuse - 30 A
3. CDS Fuse - 30 A
4. HAZ Fuse - 15 A
5. SRS WRN Fuse - 5 A
6. DCC 1 Fuse - 30 A
7. ALT-S Fuse - 5 A
8. AM2 Fuse - 10 A
9. HORN Fuse - 10 A
10. DOOR NO. 2 Fuse - 15 A
11. A/F Fuse - 25 A
12. IG2 Fuse - 15 A
13. EFI NO. 1 Fuse - 15 A
14. ABS NO. 2 Fuse - 25 A
15. ABS NO. 3 Fuse - 25 A
16. EFI NO. 2 Fuse - 7.5 A
17. ALT Fuse - 120 A
18. ABS Fuse - 60 A
19. DRL Fuse - 7.5 A
20. ABS NO. 4 Fuse - 5 A
21. HTR Fuse - 50 A
22. AM1 Fuse - 40 AEngine Room Junction Block:
1
A
D
G 2
B
E
H 3
C
F
1011
1213141516
98
45
29
28
67
20
27
30
19
2625
2324
23. H-LP LH Fuse - 15 A *2
24. H-LP RH Fuse - 15 A *2
25. H-LP LH LWR Fuse - 15 A *1
26. H-LP RH LWR Fuse - 15 A *1
27. SPARE Fuse - 10 A
28. SPARE Fuse - 15 A
29. SPARE Fuse - 25 A
30. SPARE Fuse - 30 AA. MG/CLT Relay
B. A/F Relay
C. HORN Relay
D. EFI Relay
E. IG2 Relay
F. ST Relay
G. HEAD Relay
H. HTR Relay Relays: Fuses:
*1: w/ Daytime Running Light
*2: w/o Daytime Running Light 1718
21 22
BE-10
- BODY ELECTRICALPOWER SOURCE
1614 Author
: Date
:
2001 AVALON (RM808U)

I12518
1. ECU-IG NO. 1 Fuse - 5 A
2. ECU-B NO. 2 Fuse - 7.5 A
3.TAIL Fuse - 10 A
4. SEAT HTR Fuse - 20 A
5. FR P/W Fuse - 20 A
6.GAUGE NO. 1 Fuse - 10 A
7. HTR Fuse - 10 A
8. FOG Fuse - 15 A
9. TURN Fuse - 7.5 A
10. A/C Fuse - 10 A
11. RADIO Fuse - 15 A
12. PANEL Fuse - 5 A
13.FL P/W Fuse - 25 A
14.PWR OUTLET NO. 1 Fuse - 15 A
15. ECU-ACC Fuse - 5 A
16. SRS ACC Fuse - 10 A
17. MIR HTR Fuse - 10 A
18. PWR OUTLET NO. 2 Fuse - 15 A
19. GAUGE NO. 2 Fuse - 10 A
20. OBDII Fuse - 7.5 A
21.STOP Fuse - 15 A
22.DOME Fuse - 7.5 A
23. OPNER Fuse - 5 A
24.RL P/W Fuse - 20 A
25.RR P/W Fuse - 20 A
26. WIP Fuse - 25 A
27.ECU-IG NO. 2 Fuse - 10 A
28.CIG Fuse - 15 A
29.DOOR NO. 1 Fuse - 25 A
30. SUN ROOF Fuse - 30 A
31. DEF Fuse - 40 A
32.PWR SEAT Fuse - 30 A Fuses:
Driver Side Junction Block:
2526
31
32
1234568
21222324
7910
27282930
Relays:
A. FOG Relay
B. DEF Relay
C. IG1 Relay
D. TAIL Relay
E. PWR Relay
F. N/F-1
G.N/F-2
AB
C
D E F G
11121314151718161920
- BODY ELECTRICALPOWER SOURCE
BE-1 1
1615 Author
: Date
:
2001 AVALON (RM808U)

I12520
1.HEAD LH UPR Fuse - 10 A *1
2. HEAD RH UPR Fuse - 10 A *1
A. DRL NO. 3 Relay *1
B. DRL NO. 4 Relay *1
C. DRL NO. 2 Relay *1 Relays: Fuses:
A. FAN NO. 3 Relay
B. ABS-MTR Relay
C. FAN NO. 2 Relay
D. ABS-SOL Relay
E. FAN NO. 1 Relay Relays: Relay Block No. 8: Relay Block No. 7:
1 A
D
2B
EC
A
B
C
*1: w/ Daytime Running Light System (w/ Day time running light) BE-12
- BODY ELECTRICALPOWER SOURCE
1616 Author
: Date
:
2001 AVALON (RM808U)

N21865
(a)
(b)
2
112
N21866
21
N21867
2
1
N21865
(a)
(b)
21
1
2
N22086
21
- BODY ELECTRICALPOWER SEAT CONTROL SYSTEM (w/o Driving
Position Memory)BE-109
1713 Author
: Date
:
2001 AVALON (RM808U)
9. INSPECT SLIDE MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (-) lead to terminal 2, check that the
motor turns counterclockwise.
(b) Reverse the polarity, check that the motor turns clock-
wise.
If operation is not as specified, replace the seat adjuster.
10. INSPECT SLIDE MOTOR PTC THERMISTOR OPERA-
TION
( ): Passenger side
(a) Connect the positive (+) lead from the battery to terminal
1 (2), the positive (+) lead from the ammeter to terminal
2 (1) and the negative (-) lead to the battery negative (-)
terminal, then move the seat cushion to the front position.
(b) Continue to apply voltage, check that current changes to
less than 1 ampere within 4 to 90 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 2 (1) and the negative (-)
lead to terminal 1 (2), check that the seat cushion begins
to move backwards.
If operation is not as specified, replace the seat adjuster.
11. INSPECT FRONT VERTICAL MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (-) lead to terminal 2, check that the
motor turns counterclockwise.
(b) Reverse the polarity, check that the motor turns clock-
wise.
If operation is not as specified, replace the seat adjuster.
12. INSPECT FRONT VERTICAL MOTOR PTC THERM-
ISTOR OPERATION
( ): Passenger side
(a) Connect the positive (+) lead from the battery to terminal
1 (2), the positive (+) lead from the ammeter to terminal
2 (1) and the negative (-) lead to the battery negative (-)
terminal, then move the seat cushion to the highest posi-
tion.
(b) Continue to apply voltage, check that the current changes
to less than 1 ampere within 4 to 90 seconds.

N22087
21
N21865
(a)
1(b)
2
2
1
N22088
21
N22089
21
N21865
(a)
(b)
2
1
1 2 BE-1 10
- BODY ELECTRICALPOWER SEAT CONTROL SYSTEM (w/o Driving
Position Memory)
1714 Author
: Date
:
2001 AVALON (RM808U)
(c) Disconnect the leads from the terminals.
(d) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 2 (1) and the negative (-)
lead to terminal 1 (2), check that the seat cushion begins
to descend.
If operation is not as specified, replace the seat adjuster.
13. INSPECT REAR VERTICAL MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (-) lead to terminal 2, check that the
motor turns counterclockwise.
(b) Reverse the polarity, check that the motor turns clock-
wise.
If operation is not as specified, replace the seat adjuster.
14. INSPECT REAR VERTICAL MOTOR PTC THERM-
ISTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
2 (1), the positive (+) lead from the ammeter to terminal
1 (2) and the negative (-) lead to the battery negative (-)
terminal, then move the seat cushion to the highest posi-
tion.
(b) Continue to apply voltage, check that the current changes
to less than 1 ampere within 4 to 90 seconds.
(c) Disconnect the leads from the terminals.
(d) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 1 (2) and the negative (-)
lead to terminal 2 (1), check that the seat cushion begins
to descend.
If operation is not as specified, replace the seat adjuster.
15. INSPECT RECLINING MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (-) lead to terminal 2, check that the
motor turns counterclockwise.
(b) Reverse the polarity, check that the motor turns clock-
wise.
If operation is not as specified, replace the seat adjuster.