1999 TOYOTA CAMRY manual transmission

MX04Q±01
Q02949
Front
SM0199
SST
Z00428
Z00429
± MANUAL TRANSAXLE (S51)OUTPUT SHAFT
MX±33
1883 Author: Date:
REASSEMBLY
HINT:
Coat all of the sliding and rotating surfaces with gear oil before
reassembly.
1. INSTALL NO.1 CLUTCH HUB INTO HUB SLEEVE
(a) Install the 3 springs and shifting keys to the clutch hub.
(b) Install the hub sleeve to the clutch hub.
HINT:
Position the identification groove of the hub sleeve to the front
of the transmission.
2. INSTALL THRUST WASHER, 1ST GEAR, NEEDLE
ROLLER BEARING, SYNCHRONIZER RING AND NO.1
HUB SLEEVE TO OUTPUT SHAFT
(a) Using SST and a press, install the thrust washer.
SST 09316±60011 (09316±00041)
(b) Apply gear oil to the needle roller bearing.
(c) Place the synchronizer ring on the gear and align the ring
slots with the shifting keys.
(d) Using a press, install the 1st gear and No.1 hub sleeve.
3. INSPECT 1ST GEAR THRUST CLEARANCE
(See page MX±28)

Q08145
SST
SM0286
SST
SM0155
SST
Z00442
MT0634
SST MX±38
± MANUAL TRANSAXLE (S51)DIFFERENTIAL CASE
1888 Author: Date:
6. Transaxle Case Side:
IF NECESSARY, REPLACE DIFFERENTIAL SIDE
BEARING RETAINER OIL SEAL
(a) Using SST and a hammer, drive out the oil seal from the
retainer.
SST 09950±60020 (09951±00680), 09950±70010
(09951±07150)
(b) Using SST and a hammer, drive in a new oil seal until its
surface is flush with the case surface.
SST 09350±32014 (09351±32130, 09351±32150)
(c) Coat the lip of the oil seal with MP grease.
7. Transmission Case Side:
IF NECESSARY, REPLACE SIDE OIL SEAL
(a) Using a screwdriver and hammer, drive out the oil seal.
(b) Using SST and a hammer, drive in a new oil seal until its
surface is flush with the case surface.
SST 09350±32014 (09351±32130, 09351±32150)
(c) Coat the lip of the oil seal with MP grease.
8. Transaxle Case Side:
IF NECESSARY, REPLACE SIDE BEARING OUTER
RACE
(a) Using a brass bar and hammer, drive out the bearing out-
er race.
(b) Install the bearing retainer without an O±ring.
(c) Install and torque the 6 bolts.
Torque: 18 N´m (185 kgf´cm, 13 ft´lbf)
(d) Place the thinnest shim into the case.
(e) Using SST and a press, install a new bearing outer race.
SST 09950±60020 (09951±00680), 09950±70010
(09951±07150)
(f) Remove the 6 bolts.
(g) Remove the bearing retainer and shim.

SM0287
SST
Q08649
Case Side
SM0289
SST
± MANUAL TRANSAXLE (S51)DIFFERENTIAL CASE
MX±41
1891 Author: Date:
3. INSTALL SIDE BEARING TO DIFFERENTIAL CASE
(a) Using SST and a press, install a new side bearing to the
transmission case side.
SST 09316±60011 (09316±00011), 09350±32014
(09351±32120)
(b) Install the vehicle speed sensor drive gear to the trans-
axle case side.
(c) Using SST and a press, install a new side bearing to the
transaxle case side.
SST 09316±60011 (09316±00011), 09350±32014
(09351±32120)
NOTICE:
Install the black cage bearing on the vehicle speed sensor
drive gear side.
4. ADJUST DIFFERENTIAL CASE SIDE BEARING PRE-
LOAD
(a) Install the differential to the transaxle case.
(b) Install the transmission case.
(c) Install and torque the case bolts.
Torque: 29 N´m (300 kgf´cm, 22 ft´lbf)
(d) Install the shim into the transmission case.
(e) Install the bearing retainer without an O±ring.
(f) Install and torque the 6 bolts.
Torque: 18 N´m (185 kgf´cm, 13 ft´lbf)

Z00620
SST MX±42
± MANUAL TRANSAXLE (S51)DIFFERENTIAL CASE
1892 Author: Date:
(g) Using SST and a torque wrench, measure the preload.
SST 09564±32011
Preload (at starting):
0.8 ± 1.6 N´m (8 ± 16 kgf´cm, 6.9 ± 13.9 in.´lbf)
If the preload is not within the specification, remove the trans-
mission case side bearing retainer. Select another shim.
HINT:
The preload will change about 0.3 ± 0.4 N´m (3 ± 4 kgf´cm, 2.6
± 3.5 in.´lbf) with each 0.05 mm (0.0019 in.) change in shim
thickness.
MarkThickness mm (in.)MarkThickness mm (in.)
11.90 (0.0748)112.40 (0.0945)
21.95 (0.0768)122.45 (0.0965)
32.00 (0.0787)132.50 (0.0984)
42.05 (0.0807)142.55 (0.1004)
52.10 (0.0827)152.60 (0.1024)
62.15 (0.0846)162.65 (0.1043)
72.20 (0.0866)172.70 (0.1063)
82.25 (0.0886)182.75 (0.1083)
92.30 (0.0906)192.80 (0.1102)
102.35 (0.0925)±±
(h) Remove the 6 bolts.
(i) Remove the bearing retainer and shim.
(j) Remove the 17 bolts.
(k) Remove the transmission case.

PP0H7±03
± PREPARATIONMANUAL TRANSAXLE (E153)
PP±61
11 3 Author: Date:
MANUAL TRANSAXLE (E153)
SST (Special Service Tools)
09223±15020Oil Seal & Bearing ReplacerDifferential case oil seal
09308±00010Oil Seal PullerOutput shaft front bearing outer
race
09316±20011Transfer Bearing ReplacerDifferential case tapered roller
bearing
09316±60011Transmission & Transfer Bearing
Replacer
(09316±00011)Replacer Pipe
(09316±00021)Replacer ºAº
(09316±00041)Replacer ºCº1st gear
No.1 hub sleeve
Differential case tapered roller
bearing outer race
(09316±00071)Replacer ºFºOutput shaft front bearing
09506±30012Differential Drive Pinion Rear
Bearing Cone ReplacerOutput shaft rear bearing
09506±35010Differential Drive Pinion Rear
Bearing ReplacerNo.2 hub sleeve
3rd gear
Input shaft rear bearing
09608±00081Differential Side Bearing Cone
ReplacerInput shaft oil seal
09612±65014Steering Worm Bearing PullerInput shaft bearing
Differential case tapered roller
bearing outer race

PP0H2±04
PP±66
± PREPARATIONMANUAL TRANSAXLE (S51)
11 8 Author: Date:
MANUAL TRANSAXLE (S51)
SST (Special Service Tools)
09308±00010Oil Seal PullerInput shaft front bearing
Output shaft front bearing
09309±120205th Driven Gear Replacer5th driven gear
09310±35010Countershaft Bearing ReplacerInput shaft front bearing
Output shaft front bearing
09316±60011Transmission & Transfer Bearing
Replacer
(09316±00011)Replacer Pipe3rd driven gear
Differential side bearing
(09316±00041)Replacer ºCºOutput shaft thrust washer
09350±32014TOYOTA Automatic Transmission
Tool Set
(09351±32120)Overdrive Bearing ReplacerDifferential side bearing
(09351±32130)HandleDifferential side bearing
retainer oil seal
Differential case oil seal
(Transaxle case side)
(09351±32150)Oil Seal ReplacerDifferential side bearing
retainer oil seal
Differential case oil seal
(Transaxle case side)
09564±32011Differential Preload Adaptor
09608±00071Drive Pinion Rear Bearing Cone
ReplacerInput shaft rear bearing

SS09P±01
SS±48
± SERVICE SPECIFICATIONSMANUAL TRANSAXLE (E153)
211 Author: Date:
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
Transaxle x Engine 17 mm head
14 mm head A
(See page MX±4) 14 mm head B64
46
37650
470
38047
34
27
Cruise control actuator x Body (w/ Cruise control)131309
Starter x Transaxle3940029
Clutch release cylinder x Transaxle121209
Clutch acummulator x Transaxle Bolt
Nut21
26210
27015
20
Clutch line bracket x Transaxle121209
Front wheel1031,05076
Exhaust pipe support stay3333024
Front exhaust pipe x Exhaust manifold6263046
Front exhaust pipe x Center exhaust pipe5657041
No.1 exhaust pipe support bracket x Front suspension member3333024
Stabilizer bar link x Stabilizer bar3940029
Stabilizer bar bracket x Front suspension member1919514
PS gear assembly x Front suspension member1811,850134
Front engine absorber x Transaxle4849035
RH exhaust manifold stay2020014
Front engine mounting insulator x Front suspension member Silver bolt
Green bolt44
66450
67033
48
LH engine mounting insulator x Front suspension member8082059
LH engine mounting bracket x Transaxle6465047
Rear engine mounting insulator x Front suspension member6667048
Steering return pipe x Front suspension member101007
Front suspension member with lower suspension arm Bolt A
Bolt B
(See page MX±4) Nut C181
32
361,850
330
370134
24
27
Flywheel housing under cover x Transaxle7.88069 in.´lbf
Shift cable grommet retainer x Body4.95043 in.´lbf
Shift lever assembly x Body121209
No.2 selecting bellcrank with selecting bellcrank support2020014
Shift and select lever shaft lock bolt4950036
Shift and select lever shaft assembly x Transmission case2020014
Transmission case cover x Transmission case2930022
Breather plug4950036
Output shaft lock nut1231,25090
Shift fork and shift head set bolt2424017
Rear bearing retainer x Transmission case4243031
Straight screw plug2525018
Straight screw plug (Reverse restrict pin)131309
Reverse idler gear shaft lock bolt2930022
Transmission case x Transaxle case2930022
Transmission oil pipe x Transaxle case1717513
Reverse shift arm bracket assembly x Transaxle case1717513

± SERVICE SPECIFICATIONSMANUAL TRANSAXLE (E153)
SS±49
212 Author: Date:
Transmission oil pump assembly x Transaxle case1717513
Transaxle case receiver x Transaxle case7.47565 in.´lbf
Clutch release fork support4748035
Control lever housing support bracket x Transaxle case1717513
Vehicle speed sensor1717513
Clutch release line bracket x Transaxle case1717513
Back±up light switch4041030
Filler and drain plug4950036
No.1 and No.2 oil receiver pipe x Transmission case1717513
Transmission oil cooler sub±assembly x Elbow3435025
Elbow x Transaxle case2727520
Transmission oil pump case x Oil pump cover101058
Transaxle case cover x Transaxle case5455040
Differential left case x Differential right case6364046
Ring gear set bolt1241,26091