1999 NISSAN PRIMERA engine oil capacity

Engine Maintenance
INSPECTION AND ADJUSTMENT
Drive belt deflection and tension
Deflection adjustment Unit: mm (in) Tension adjustment* Unit: N (kg, lb)
Used belt
New beltUsed belt
New belt
LimitAfter
adjustmentLimitAfter
adjustment
Alternator
Without aircondi-
tioner compressor10.2
(0.402)6.5 - 7.0
(0.256 - 0.276)5.5 - 6.1
(0.217 - 0.240)
292
(29.8, 65.6)652 - 740
(66.5 - 75.5,
146.6 - 166.4)789 - 877
(80.5 - 89.7,
177.4 - 197.6)
With airconditioner
compressor8.1
(0.319)5.3 - 5.7
(0.209 - 0.224)4.5 - 5.0
(0.177 - 0.197)
Power steering
oil pump10.8
(0.425)6.6 - 7.5
(0.260 - 0.295)6.0 - 6.6
(0.236 - 0.260)196
(20.0, 44.1)495 - 583
(50.5 - 59.5,
111.3 - 131.1)603 - 691
(61.5 - 70.5,
135.6 - 155.3)
Applied pushing force 98 N (10 kg, 22 lb)—
*: If belt tension gauge cannot be installed at check points shown, check drive belt tension at a different location on the belt.
Oil capacity (Refill capacity)Unit:
(Imp pts)
With oil filter change 2.9 (5 - 1/8)
Without oil filter change 2.7 (4 - 3/4)
Coolant capacityUnit:
(Imp pts)
With reservoir tank 6.1 (10 - 3/4)
Reservoir tank 0.8 (1 - 3/8)
Spark plug
Make CHAMPION NGK
Standard typeRC10YCC4
RC10YC4BKR5E-11
Hot typeRC12YCC4
RC12YC4BKR4E-11
Cold typeRC7YCC4
RC7YC4BKR6E-11
Plug gap mm (in) 1.0 - 1.1 (0.039 - 0.043)
SERVICE DATA AND SPECIFICATIONS (SDS)QG
MA-56

Engine Maintenance
INSPECTION AND ADJUSTMENT
Drive belt deflection and tension
Deflection adjustment Unit: mm (in) Tension adjustment* Unit: N (kg, lb)
Used belt
New beltUsed belt
New belt
LimitAfter adjust-
mentLimitAfter adjust-
ment
Alternator12-13
(0.47 - 0.51)8-9
(0.31 - 0.35)7-8
(0.28 - 0.31)264
(26.9, 59.3)493 - 583
(50.3 - 59.5,
110.8 - 131.1)11720 70J00 11720 70J05
603 - 691
(61.5 - 70.5,
135.6 - 155.3)652 - 740
(66.5 - 75.5,
146.6 - 166.4)
Air condi-
tioner com-
pressor9 (0.35)5.5 - 6.5
(0.217 -
0.256)4.5 - 5.5
(0.177 -
0.217)304
(31.0, 68.3)534 - 623
(54.5 - 63.5,
120.0 - 140.1)11920 9F500 11920 9F505
652 - 740
(66.5 - 75.5,
146.6 - 166.4)838 - 926
(85.5 - 94.5,
188 - 208)
Power steer-
ing oil pump12
(0.47)8-9
(0.31 - 0.35)7-8
(0.28 - 0.31)264
(26.9, 59.3)493 - 583
(50.3 - 59.5,
110.8 - 131.1)603 - 691
(61.5 - 70.5,
135.6 - 155.3)603 - 691
(61.5 - 70.5,
135.6 - 155.3)
Applied push-
ing force98 N (10 kg, 22 lb)—
*: If belt tension gauge cannot be installed at check points shown, check drive belt tension at a different location on the belt.
Oil capacity (Refill capacity)Unit:
(Imp pts)
With oil filter change 3.7 (6 - 1/2)
Without oil filter change 3.5 (6 - 1/8)
Coolant capacity (Refill capacity)
Unit:
(Imp pts)
Engine SR20DE
With reservoir tankM/T 6.6 (11 - 5/8)
CVT 6.8 (12)
Reservoir tank 0.8 (1 - 3/8)
Spark plug
Make NGK
Ty p e
Standard BKR6EY-11
Hot—
Cold—
Plug gap mm (in) 1.0 - 1.1 (0.039 - 0.043)
Ignition leadUnit: kΩ/m
Ignition lead Resistance [at 25°C(77°F)]
No. 1 cylinder Approx 3.8
No. 2 cylinder Approx 3.5
No. 3 cylinder Approx 2.7
No. 4 cylinder Approx 2.4
For U.K. (Made by Bougicord) 4.48 - 6.72 kΩ(1.365 - 2.048
kΩ/ft) [at 25°C (77°F)]
SERVICE DATA AND SPECIFICATIONS (SDS)SR20DE
MA-57

Engine Maintenance
INSPECTION AND ADJUSTMENT
Drive belt deflection
Deflection adjustment Unit: mm (in)
Used belt
New belt
Limit After adjustment
Alternator 17 (0.67)10.5 - 12.5
(0.413 - 0.492)8.5 - 10.5
(0.335 - 0.413)
Air conditioner compressor 17 (0.67)11.5 - 13.5
(0.453 - 0.531)9.5 - 11.5
(0.374 - 0.453)
Power steering oil pump 8 (0.31)5-7
(0.20 - 0.28)4-6
(0.16 - 0.24)
Applied pushing force 98 N (10 kg, 22 lb)
Coolant capacity (Refill capacity)
Unit:
(Imp pts)
With reservoir tank 6.4 (11 - 1/4)
Reservoir tank 0.8 (1 - 3/8)
Engine oil capacity (Refill capacity)
Unit:
(Imp pts)
With oil filter 5.0 (8 - 3/4)
Without oil filter 4.5 (7 - 7/8)
Injection nozzle
Unit: kPa (bar, kg/cm2, psi)
Injection pressure 12,749 (127.5, 130, 1,849)
SERVICE DATA AND SPECIFICATIONS (SDS)CD20T
MA-58

General Specifications Ð RS5F32A and
RS5F70A
TRANSAXLE
Engine CD20T QG16DE QG18DE SR20DE
Transaxle model RS5F32A RS5F70A
Transaxle model code number 2J624 8E069 7J006 6J016
Number of speeds5
Synchromesh typeWarner
Shift pattern
NMT031
Gear ratio 1st 3.3333 3.3333
2nd 1.9545 1.9545
3rd 1.2857 1.2857
4th 0.9268 0.9268
5th 0.7333 0.7556
Reverse 3.2143 3.2143
Number of teeth Input gear 1st 15 15
2nd 22 22
3rd 28 28
4th 41 41
5th 45 45
Rev. 14 14
Main gear 1st 50 50
2nd 43 43
3rd 36 36
4th 38 38
5th 33 34
Rev. 45 45
Reverse idler gear 31 37
Oil capacity (Reference)(Imp pt) 3.6 - 3.8 (6-3/8 - 6-3/4) 3.0 (5-1/4)
Oil level mm (in)
57 - 62 (2.244 - 2.441)75.5 - 80.5
(2.972 - 3.169)56.5 - 61.0
(2.224 - 2.402)
FINAL GEAR
Engine QG16DE QG18DE/ SR20DE CD20T
Final gear ratio 4.4375 4.1765 3.8888
Number of
teethFinal gear/
Pinion71/16 71/17 70/18
Side gear/
Pinion16/10 14/10 14/10
SERVICE DATA AND SPECIFICATIONS (SDS)
General Specifications Ð RS5F32A and RS5F70A
MT-86