1995 ACURA TL radio antenna

Dashboard

Component Removal/Installation (cont'd)

Dashboard center panel/Radio panel/Switch panel

removal:

1, Carefully detach the clips, then pull out the dash-

board center panel.

DASHBOARD

CENTER PANEL

CLIMATE

CONTROL

UNIT

2. Disconnect the connectors, then remove the dash-

board center panel.

3. Make sure you have the anti-theft code for the

radio, then write down the frequencies for the

radio's preset buttons.

4. Remove the screws, then pull out the radio panel

with the stereo radio/cassette player. Disconnect the

connectors and antenna lead, then remove it.

CONNECTORS

STEREO RADIO/

CASSETTE PLAYER
ANTENNA

LEAD

SHOP TOWEL
5. Installation is the reverse of the removal procedure.

NOTE:

Make sure the connectors and antenna lead are

connected properly.

Enter the anti-theft code for the radio, then enter

the customer's radio station presets.

Driver's switch panel removal:

1. Carefully detach the clips, then pull out the driver's

switch panel. Disconnect the connectors, then

remove it.

DRIVER'S SWITCH

PANEL

2. Installation is the reverse of the removal procedure.

NOTE: Make sure the connectors are connected

properly.

RADIO

PANEL
CONNECTOR

CONNECTORS
CONNECTORSProCarManuals.com

7. Remov e th e bolts .
CAUTION : Us e protectiv e plate s o n th e botto m o f
th e fron t pilla r trim .
6 x 1. 0 m m9.8 N- m (1. 0 kgf-m ,
7. 2 Ibf-ft )
6 x 1. 0 m m9.8 N- m (1. 0 kgf-m ,
7. 2 Ibf-ft )
6 x 1. 0 m m9.8 N- m (1. 0 kgf-m ,
7. 2 Ibf-ft )
PROTECTIV E
PLATE
CAP CA
P
IN-CA R TEMPERATUR E
SENSO R CONNECTO RDASHBOAR
D
CLIMAT E CONTRO LUNIT CONNECTOR S
ANTENNALEAD
SRS UNI T 9
. Installatio n i s th e revers e o f th e remova l procedure .
NOTE:
Make sur e th e dashboar d fit s ont o th e guid e pi n
correctly .
Before tightenin g th e bolts , mak e sur e th e dash -
boar d wir e harnesse s ar e no t pinched .
Mak e sur e th e connectors , antenn a lea d an d ai r
hos e ar e connecte d properly .
Ente r th e anti-thef t cod e fo r th e radio , the n ente r
th e customer' s radi o statio n presets .
CLIP
CONNECTO R
8. Lif t an d pul l ou t th e dashboar d half-way , the n dis -
connec t th e connectors , antenn a lea d an d ai r hos e
whil e holdin g th e dashboard .
CAUTION : D o no t dro p th e dashboard .
CAP
SHO P TOWE L
SHO
P
TOWE L
CAP
DASHBOAR DGUIDE PI N
5 x 0. 8 m m9 N- m (0. 9 kgf-m ,
7 Ibf-ft )
PROTECTIV E
PLATE
AIRHOS E
ProCarManuals.com

Removal
1. Mak e sur e yo u hav e th e anti-thef t cod e fo r th e radio ,
the n writ e dow n th e frequencie s fo r th e radio' s pre -
set buttons .
2. Pr y ou t th e dashboar d cente r pane l fro m th e dash -
board .
3 . Disconnec t th e connector s fro m th e climat e contro l
unit.
DASHBOAR D CENTE R PANE L
4. Remov e th e radi o pane l an d stere o radio /
cassette/C D Playe r fro m th e dashboard .
5 . Disconnec t th e 16 P an d 5 P connectors , an d antenn a
lea d fro m th e stere o radio/cassette/C D player .
5PCONNECTO RANTENNALEAD
16 P CONNECTO R
STERE O RADIO/CASSETTE/C D PLAYE R
6. Remov e th e stere o radio/cassette/C D playe r fro m
th e radi o panel .
STERE O RADIO/CASSETTE/C DPLAYER
RADIO PANE L
7. Instal l i n th e revers e orde r o f removal .
8 . Ente r th e anti-thef t cod e fo r th e radio , the n ente r th e
customer' s radi o statio n presets .
ProCarManuals.com