1993 VOLKSWAGEN CORRADO Repair Manual

SUSPENSION - REAR
Article Text (p. 4)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 09:24PM
WHEEL BEARING
Removal (Disc Brakes)
Raise and support vehicle. Remove wheel assembly. Remove
caliper assembly and support it out of work area. Remove dust cap,
cotter pin, hub nut, and thrust washer. Remove brake disc. Using a
long drift, tap bearings, races, and grease seal from disc hub.
Installation (Disc Brakes)
1) Clean hub cavity thoroughly. Using Bearing Race Installer
(VW 432 and VW 411), press inner and outer bearing races into bore.
Lubricate and install inner bearing. Using Seal Installer (VW 295 and
3074), tap grease seal into bore.
2) Install brake disc, outer bearing, thrust washer, and hub
nut. Reverse removal procedure to complete installation. Adjust wheel
bearing. See WHEEL BEARING under ADJUSTMENTS & INSPECTION. Install NEW
cotter pin.
Removal (Drum Brakes)
Raise and support vehicle. Remove wheel assembly. Remove dust
cap, cotter pin, hub nut, and thrust washer. Remove brake drum. Using
a long drift, tap bearings, races, and grease seal from hub.
Installation (Drum Brakes)
1) Clean hub cavity thoroughly. Using Outer Bearing Race
Installer (VW 431 and VW 411), press outer bearing race into bore.
Using Inner Bearing Race Installer (VW 432 and VW 411), press inner
bearing race into bore. Lubricate and install inner bearing. Using
Seal Installer (VW 295 and 3074), tap grease seal into bore.
2) Install brake drum, outer bearing, thrust washer, and hub
nut. Reverse removal procedure to complete installation. Adjust wheel
bearing. See WHEEL BEARING under ADJUSTMENTS & INSPECTION. Install NEW
cotter pin.
TORQUE SPECIFICATIONS
TORQUE SPECIFICATIONS TABLEÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄApplication Ft. Lbs. (N.m)
Brake Caliper Bolt .......................... 48 (65)
Coil Spring Retainer-To-Piston Rod Nut ...... 11 (15)
Rear Axle Beam Pivot Bushing Bolt ........... 43 (58)
Rear Axle Mounting Pad-To-Body Bolt ......... 63 (85)
Shock Absorber Slot Nut ..................... 15 (20)
Shock Absorber-To-Axle Beam Nut ............. 52 (70)
Shock Absorber-To-Body Bolt ................. 26 (35)
Stub Axle-To-Control Arm Bolt ............... 44 (60)
Wheel Lug Bolt ............................. 81 (110)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄEND OF ARTICLE

SYSTEM WIRING DIAGRAMS
Article Text
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 09:24PM
ARTICLE BEGINNING
1993 System Wiring Diagrams
Volkswagen - Corrado
GROUND DISTRIBUTIONGround Distribution Circuit (1 of 5)

SYSTEM WIRING DIAGRAMS
Article Text (p. 2)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 09:24PMGround Distribution Circuit (2 of 5)

SYSTEM WIRING DIAGRAMS
Article Text (p. 3)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 09:24PMGround Distribution Circuit (3 of 5)

SYSTEM WIRING DIAGRAMS
Article Text (p. 4)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 09:24PMGround Distribution Circuit (4 of 5)

SYSTEM WIRING DIAGRAMS
Article Text (p. 5)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 09:24PMGround Distribution Circuit (5 of 5)
TRANSMISSION

SYSTEM WIRING DIAGRAMS
Article Text (p. 6)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 09:24PMTransmission Circuit
END OF ARTICLE

TRANSMISSION REMOVAL & INSTALLATION - A/T
Article Text
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 09:25PM
ARTICLE BEGINNING
TRANSMISSION SERVICING
Volkswagen Transmission Removal & Installation - Automatic
Corrado SLC, Passat
REMOVAL & INSTALLATION
REMOVAL
1) Obtain radio code. Disconnect negative battery cable.
Remove air ducts to brake caliper and engine air intake. Disconnect
speedometer cable from transaxle.
2) Remove upper transaxle-to-engine bolts. Disconnect and
plug transaxle cooler lines. Support engine from above. Remove
starter. Disconnect accelerator and selector cables from transaxle.
3) Remove left transaxle mount and support. Remove electrical
wiring from transaxle. Remove lower bolts on front mount and remove
mount.
4) Place mating marks on axle shaft flanges. Remove left and
right axle shaft flange bolts. Disconnect right strut-to-spindle
bolts. Remove right side axle. Reconnect strut. Remove protective
plate from transaxle.
5) Remove torque converter-to-drive plate bolts. Slightly
lower engine assembly. Support transaxle with jack. Remove lower
transaxle-to-engine mounting bolts. Lower transaxle.
INSTALLATION
To install, reverse removal procedure. Adjust accelerator and
selector cables if necessary. Use NEW self-locking nuts. Tighten bolts
to specification. See TORQUE SPECIFICATIONS.
TORQUE SPECIFICATIONS
TORQUE SPECIFICATIONS TABLEÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄApplications Ft. Lbs. (N.m)
Axle Shaft Nut ................................. 195 (265)
Axle Shaft-To-Flange Bolts ....................... 33 (45)
Engine Mount Bolts ............................... 33 (45)
Strut-To-Spindle Bolts ........................... 70 (95)
Torque Converter-To-Drive Plate Bolts ............ 44 (60)
Transaxle-To-Engine
M10 Bolts ...................................... 44 (60)
M12 Bolts ...................................... 59 (80)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄEND OF ARTICLE