1988 CITROEN CX Service Manual

3ft 8531

CARBURETTOR SPECIFICATION
8531

CARBURETTOR SPECIFICATION
Engine type 829.A5
MAKE : SOLEX
Type : 34 CICF Ref. CIT 214 and 214-I
Choke flap in primary barrel
Dual choke carburettor of the compound type
Fuel return pipe to tank located on the carburettor top cover
DESCRIPTION
Venturi
Main jet
Air compensator jet
Emulsion tube
Idling jet
Idling air correction jet
By-pass jet
By-pass air jet
Accelerator pump injector
Econostat - Petrol jet
Air jet
Polyamide fuel float
Ball type needle valve
Positive opening of
1st choke butterfly
Opening of the strangler flap
with 400 mm Mg (530 mb)
Mixture control screw
Idle cut off solenoid 1st choke
23
127.5
205
VA
55
60 Ref. No. @
(under Ref. No. 0)
Ref. No. @
(under Ref. No. @)
Ref. No. @
Ref. No. @
Ref. No. @ 26
115
140
ZA
60
90
145
80 2nd choke
Ref. No. @ 12 I!I 2g
Ref. No. @ 1.8
1.25 k 0.05 mm
4.4 + 0.5 mm
Ref. No. @
Ref. No. @
Adjustments carried out on CCL’POLLUH test bench: Ref. No. @
(under Ref. No. 0
Ref. No. @
[under Ref No. @
Ref. No. @
Ref. No. @
Ref. No. @
Ref. No. @
OPENING OF THE THROTTLE BUTTERFLY 1 INITIAL SETTING OF IDLING SPEED
I
1st choke
W mixture screw closed 2nd choke 1st choke
W mixture screw open 2nd choke
I
Positive opening
1st choke
N 195 K 205 N 240 K 205

MA
142.00/3 1
CARBURETTOR SPECIFICATION
8531

CARBURETTOR SPECIFICATION
Engine type J6T.A500
MAKE : WEBER
Type : 34 DMTR 11 O/100 Ref. W 14550
Choke flap in primary barrel
Idle cut off solenoid
Dual choke compound carburettor
Fuel return pipe to tank located on the carburettor top cover
Throttle closing dashpot
Anti-pollution device
DESCRIPTION - 30110185
30110185 -
1st choke 2nd choke
1st choke 2nd choke
Venturi 24
Ref. No. @ 26 Ref. No. @ 24 Ref. No. @ 26 Ref. No. @
Main jet
1 15 Ref. No. @ 97 (under Ref. No @ 1 11 5 Ref. No. @ 1 17 lunder Ref. No. @ 1
Arr compensator jet
210 Ref. No. @ 130 Ref. No. @ 240 Ref. No. @ 130 Ref. No. @
Emulsion tube
F63 Ref. No. @ F25 iunder Ref No. 0) F63 Ref. No. @ F25 [under Ref. No, 0)
Idling jet 52
Ref. No. @ 50 Ref. No. @ 50 Ref. No. @ 50 Ref. No. @
Idling air correction jet
170 70
170 70
Ball type needle valve
1.75 Ref. No. @ 1.75 Ref. No. @
Float setting
7 i 0.25 mm
7 AI 0.25 mm
Petrol enrichment jet 130 (under Ref No. @ )
130 lunder Ref. No @ 1
Air enrichment jet
1 15 [under Ref No. 0) 1 1 5 [under Ref. No. @ 1
Accelerator pump jet 50
Ref. No. @ 50 Ref. No. @
Air regulating screw
Ref. No. @ Ref. No. @
Mixture control screw Ref. No. @
Ref. No. @
Idle shut off solenoid
Ref. No. @ Ref. No. @
Throttle opening device Ref. No. @
Ref. No. @
Positive opening full choke
1.20 i 0.05 mm 1.20 -fr 0.05 mm
Opening of the strangler flap
with 400 mm Mg (530 mb) 4.25 + 0.25 mm
4.25 --lr 0.25 mm
djustments carried out on ccL’POLLU>) test bench:
Positive
1st choke
2nd choke 1st choke
opening
W mrxture screw closed
W mixture screw open Cumulation
x 110
N 200 K 245 N 255
N 310

8531

CARBURETTOR SPECIFICATION