2022 MERCEDES-BENZ S-CLASS SALOON LONG Owners Manual

When the Wi-Fi function is switched
oM, it is no t
possible to establish a hotspot connection.
When the Wi-Fi function is switched oM, no con-
nection can be established with the MBUX rear
tablet.
% Depending on the vehicle equipment, you can
pur

chase a data package directly from a
mobile phone network provider via the
Mercedes me Store. To be able to use the
data package, you conclude a separate con-
tract with a mobile phone network provider
via the Mercedes me Store, which can be ter-
minated at any time and for which there are
no costs. This contract is a prerequisite for
using the services from the previously pur-
chased package. The availability of this option
is dependent on the country. If the data pack-
age option is not available or can be upgra-
ded, you can purchase data volume directly
from the mobile phone network provider for a
fee.
% The use of the vehicle data t
ariM by external
devices is not available in all countries. Using the multimedia system as a Wi-Fi hotspot 
Select MBUX hotspot. 
Select one of the following connection
op

tions.
Connecting using a QR code
R
equirement: an app for scanning the QR code is
installed on the device being connected.
Alternatively: the device being connected has an
integrated QR code scanner (see manufacturer's
operating instructions). 
Scan the QR code shown.
The W

i-Fi connection is established.
Connecting using NFC 
Activate NFC on the device to be connected. 
When the NFC icon is displayed in the MBUX
hotspot menu, hold t
he device to be connec-
ted to the NFC interface. 
Follow the instructions on the device.
The W

i-Fi connection is established. Connecting using a security key 
Select the vehicle from the device to be con-
nect
ed. The vehicle is displayed with the
MBUX XXXXX network name. 
Enter the security key which is shown in the
centr
al display on the device to be connected. 
ConNrm t
he entry.
Generating a new security key 
Select the hotspot name MBUX XXXXX in t
he
MBUX hotspot menu. 
ConNrm t
he prompt with Yes.
A new security key is generated.
A connection will be established with the newly
cr
eated security key.
% When a new security key is generated, all
e

xisting Wi-Fi connections are then discon-
nected. If the Wi-Fi connections are being re-
established, the new security key must be
entered.
Using a mobile communication device as a Wi-Fi
ho
tspot (tethering)
% This function is country-dependent. 382
MBUX multimedia system


Select the Manage Internet access op tion in
the Internet and Bluetooth menu.
% The Wi-Fi function on the mobile phone and
Int

ernet access via Wi-Fi must be activated
(see the manufacturer's operating instruc-
tions). 
Select Search for access. 
Select the network. 
Log in to the Wi-Fi network.
or 
Select the mobile phone with the


Select Reset .
A q uery appears asking if the system should
really be reset. 
Select Yes .
The multimedia sy
stem is reset to the factory
settings. The multimedia system is restarted
aser the system reset.
% Due to data protection, as well as the function
of individual dr
iving systems and driving safety
systems, it is a requirement to carry out a
complete system reset before selling the vehi-
cle or transferring it to a third party, or aser
use as a hire car. AMG TRACK PACE
Function of AMG TRACK PACE
%
This function is an on-demand feature and
can be activ
ated via Mercedes me aser you
purchase your vehicle. The Digital Owner's
Manual contains further information on
Mercedes me and on-demand features.
With AMG TRACK PACE, the driving characteris-
tics on r
ace tracks can be analysed and opti- mised. You can drive previously saved race tracks
(e.g. Hoc
kenheimring), or record and save new
tracks. The driven lap times are stored for every
track. These can be analysed and compared to
other lap times to achieve the best possible race
results. Additionally, acceleration and braking pro-
cedures can be measured and stored.
Note: Use AMG TRACK PACE only on closed-oM
routes outside the public traPc area. Adapt your
driving style to your personal performance and
environmental conditions. As the driver, you are
solely responsible for driving your vehicle. Park
your vehicle safely before operating the applica-
tion. Setting Track Race
Multimedia system:
4 TRACK PACE 5
Track Race
R

ecording a new track 
Select New track. 
Select

Measuring time on a saved track

Select All tracks
. 
Select the desired track. 
Select W. 
Select Start timing if y ou are already at the
starting line.
or 
Select Navigate to f
or navigation to the start-
ing line.
Timing begins automatically when the starting line
has been cr
ossed.
% When

1
Lap overview
2 Parameter overview
3 Editing parameters
4 Deleting parameters
5 Adding new parameters
% The following values can be set for the param-
e
ters, for example:
= speed =
Longitudinal/lat
eral acceleration
= Steering angle
= Engine speed
= Engine oil/tyre temperature
Based on the analysis, you can check and opti-
mise t
he driving behaviour for any position on the
track.
Exporting tracks (USB) 
Select õ Tracks.
An o
verview of all stored tracks appears. 
Select the desired track. 
Select options W f
or the desired track. 
Select Export track to

Measurement can be stopped early by interrupt-
ing t
he acceleration procedure.
Quarter mile race 
Select = Drag race options. 
Select Quarter-mile. 
Set a target distance.
Measur

ement stops as soon as the speciNed
target distance has been reached. 
Start oM and begin t
he measurement.
Measurement begins when the vehicle accel-
erates. Timing runs until the target distance or
a maximum of one mile has been travelled.
Measurement can be stopped early by interrupt-
ing t
he acceleration procedure.
Measuring braking 
= Drag Race options 
Select Braking. 
Set a starting speed or select Automatic. 
Start oM and begin t
he measurement. 
Brake to a stop.
Measur

ement is incremental, in steps of
10 km/h to a stop. If the braking procedure is
started e.g. at a speed of 157 km/h, meas-
urement starts as soon as 150 km/h has
been reached.
Storing and calling up measured values
If measur
ement is completed or cancelled, a
prompt appears asking whether the measurement
should be saved. 
ConNrm t
he prompt with OK to save.
Calling up saved measurements 
± Select History. 
Select Acceleration, Quarter-mile or Braking. 
Select a measurement.
The desir

ed measurement is displayed in
detail.
or 
Delete a measurement. Calling up the telemetry display
Multimedia system:
4 TRACK PACE 5
Telemetry
The t

elemetry display shows current vehicle data
as a digital value and as a diagram. Up to four
parameters can be selected to be shown on the
display.
For example:
= Engine speed
= Wheel angle
= Speed
= Steering angle 
Set the desired parameters. 
Set the time.
The se

t parameters are evaluated in the dia-
gram for the selected time. ConNguring
AMG TRA
CK PACE Requirements:
T

o connect a mobile device to the TRACK PACE
app: MBUX multimedia system
387

=
The TRA CK PACE app is installed on the
mobile end device.
= The mobile end device is connected to the
multimedia system via Wi-Fi.
Multimedia system: 4 TRACK PACE 5
=
Connect mobile device via the TRACK PACE app
The TRACK PACE app makes it possible to record
videos and to synchronise them with stored
tracks. 
Select TRACK PACE App. 
Select Authorise new device .
Start the TRACK PACE app on the device to be
connect
ed. 
Select Continue and conNr
m the authorisation
prompt.
A four-digit code is shown on the central dis-
play. 
Enter the code in the smartphone.
The de
vice is authorised. De-authorising the mobile device 
Select TRACK PACE App. 
Select a device. 
ConNrm t
he message prompt with Yes.
The device is de-authorised.
Setting the TRACK PACE display on the head-up
displa
y and driver's display 
Select IC and HUD contents . 
Activate or deactivate the desired contents.
The cont
ents on the head-up display and the
driver's display are adapted.
% For further information on the Head-up Dis-
pla
y ( page 344).
% Further information about the driver's display
(  pag

e 342).
Setting acoustic feedback 
Select Acoustic feedback.
A scale wit
h values from 0 to 10 is shown. 
Select a setting. Displaying statistics 
Select TRACK PACE statistics.
S
tatistics on the current user proNle are dis-
played.
The following data are displayed:
= Driving time
= Track driven
= Recorded tracks
= Recorded Track Races
= Laps recorded
= Recorded Drag Races
= Maximum design speed
Activating the ambient light
If t
his function is active, the vehicle interior is lit in
red or green depending on delta time. 
Select Ambient lighting. 
Activate or deactivate the function.
Adjusting the dashcam
If t
he vehicle is equipped with a dashcam, it can
be used in AMG TRACK PACE. 388
MBUX multimedia system


Select Dashcam. 
Select Track Race or Drag Race and activ ate
Activate recording . 
You can set which overlay is to be used in the
r

ecorded video under Video overlay contents.Plug-in hybrid settings
ConNguring
t
he charging settings Multimedia system:
4 © 5
Hybrid 5
Charging
Se

tting the charging program 
Select Home, Work or Standard.
Opening the socket Oap
Press Open socket flap .
The soc
ket Oap opens and can be closed
again by hand.
Unlocking the charging cable (mode 3 or 4)
When t
he function is active, the charging cable is
unlocked when the maximum charge level is
reached. 
Select Home or Work. 
Activate or deactivate Unlock charging cable.
Activating or deactivating location-based charging 
Select Charge at home or Charge at work. 
Activate or deactivate Select based on loca-
tion.
When the function is activated, the vehicle's cur-
r
ent position is saved as one of the selected
options. When the address is reached again, a
brief query appears as to whether the respective
charging program should be selected.
Activating or deactivating rapid charging 
Activate or deactivate the Rapid charging
function.
The Rapid charging function incr
eases the maxi-
mum possible charging capacity at charging sta-
tions up to 60 kW in order to charge the vehicle's
high-voltage battery faster. Aser the charging
process is complete, the charging capacity in the
"Standard" charging program is again limited to
20 kW in order to protect the high-voltage battery. Setting the departure time
The se

t departure times are used for the vehicle's
pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. When rapid charging is
deactivated, the charging process start time is
optimised for the next departure time. When rapid
charging is activated, the charging process starts
immediately, irrespective of the next departure
time. 
Select Next departure time.
The following charging times can be selected: = individual c

harging times
= a Week profile
Setting an individual departure time 
Select Add new timeand se
t the time.
or 
Select