2017 MAZDA MODEL CX-3 Owner's Manual - RHD (UK, Australia) (in English)

4–157
When Driving
i-ACTIVSENSE
Cancel display
Displays when any of the following operations is done and the system is temporarily
cancelled.
 


 OFF/CAN switch is operated



 Accelerator pedal is strongly depressed


Active Driving Display Display in the instrument cluster

Adjustable Speed Limiter Main Indication (White), Adjustable Speed Limiter
Set Indication (White)/Indicator Light (Green)
Adjustable speed limiter main indication (white)
The adjustable speed limiter main indication (white) is displayed in the instrument cluster
when the adjustable speed limiter is activated.


Adjustable speed limiter set indication (white)/indicator light (green)
The adjustable speed limiter set indication (white) is displayed in the instrument cluster and
the adjustable speed limiter set indicator light (green) turns on when a speed has been set.

4–158
When Driving
i-ACTIVSENSE
Speed Limiter Warning Beep
Indicated in instrument cluster
If the vehicle speed exceeds the set speed by about 3 km/h (2 mph) or more, a warning
sound operates continuously and the adjustable speed limiter display À ashes at the same
time. The warning sound operates and the display À ashes until the vehicle speed decreases
to the set speed or less.
Indicated in active driving display
If the vehicle speed exceeds the set speed by about 3 km/h (2 mph) or more, a warning
sound is activated continuously and the adjustable speed limiter display À ashes at the same
time. The indication stops À ashing and remains on if the vehicle speed continues to exceed
the set speed by about 3 km/h (2 mph) or more, and the indication and warning sound
remain on until the vehicle is driven at the set speed or less.
Verify the safety of the surrounding area and adjust the vehicle speed by applying the
brakes. Additionally, keep a safer distance from the vehicles behind you.


Active Driving Display Display in the instrument cluster

CAUTION
(With cruise control)
If the set speed is set lower than the current vehicle speed by pressing the SET
or RES /
switch, the warning beep is not activated for about 30 seconds even if the vehicle speed is
faster than the newly set speed by 3 km/h (2 mph). Be careful not to drive over the set
speed.
(With Mazda Radar Cruise Control (MRCC))
If the set speed is set lower than the current vehicle speed by pressing the SET
or RES
switch, the warning beep is not activated for about 30 seconds even if the vehicle speed is
faster than the newly set speed by 3 km/h (2 mph). Be careful not to drive over the set
speed.

4–159
When Driving
i-ACTIVSENSE
NOTE
When the system is temporarily cancelled by depressing the accelerator pedal fully, the
adjustable speed limiter display shows the cancel display. If the vehicle speed exceeds the
set speed by about 3 km/h (2 mph) or more while the cancel display is displayed, the set
speed display À ashes but the warning sound is not operated.
Activation/Deactivation
NOTE
When the ignition is switched off, the system status before it was turned off is maintained.
For example, if the ignition is switched off while the adjustable speed limiter is operating,
the system will be operable when the ignition is switched ON the next time.
Activation
Press the MODE switch to operate the system. The adjustable speed limiter screen is
displayed, and the adjustable speed limiter main indication (white) turns on.
NOTE
When the cruise control or Mazda Radar Cruise Control (MRCC) system becomes
operable after pressing the MODE switch, press the mode switch again to switch to the
adjustable speed limiter.
Deactivation
To deactivate the system, do the following operations:
When a cruising speed has been set (adjustable speed limiter set indication (white)/
indicator light (green) turns on)
Long-press the OFF/CAN switch or press the OFF/CAN switch 2 times. The adjustable
speed limiter screen is no longer displayed and the adjustable speed limiter set indication
(white)/indicator light (green) turns off.
When a cruising speed has not been set (adjustable speed limiter main indication
(white) turns on)
Press the OFF/CAN switch. The adjustable speed limiter screen is no longer displayed and
the adjustable speed limiter main indication (white) turns off.

4–160
When Driving
i-ACTIVSENSE
NOTE
When the MODE switch is pressed while the adjustable speed limiter is operating, the
system switches to the cruise control or Mazda Radar Cruise Control (MRCC) system.
Setting the System
WARNING
Always verify the safety of the surrounding area when setting the adjustable speed
limiter:
If the speed is set lower than the current vehicle speed, the vehicle speed is decreased
to the set speed. Verify the safety of the surrounding area and keep a safer distance
between vehicles ahead and behind you.
1. Press the MODE switch to turn the system on.
2. (With cruise control)
Press the SET
to set the speed. When the current vehicle speed is 30 km/h (20 mph) or
more, the speed is set to the current vehicle speed. When the current vehicle speed is less
than 30 km/h (20 mph), the speed is set to 30 km/h (20 mph).
(With Mazda Radar Cruise Control (MRCC))
Press the SET
or SET to set the speed. When the current vehicle speed is 30 km/h
(20 mph) or more, the speed is set to the current vehicle speed. When the current vehicle
speed is less than 30 km/h (20 mph), the speed is set to 30 km/h (20 mph).
3. (With cruise control)
To increase the set speed, press the RES
switch continuously. The set speed can be
adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about
1 km/h (1 mph) increments by pressing the RES
switch momentary. For example, the
set speed increases about 4 km/h (4 mph) by pressing the RES
switch 4 times.
(With Mazda Radar Cruise Control (MRCC))
To increase the set speed, press the SET
switch continuously. The set speed can be
adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about
1 km/h (1 mph) increments by pressing the SET
switch momentary. For example, the
set speed increases about 4 km/h (4 mph) by pressing the SET
switch 4 times.
4. To decrease the set speed, press the SET
switch continuously. The set speed can be
adjusted in 10 km/h (5 mph) decrements. The set speed can also be adjusted in about
1 km/h (1 mph) increments by pressing the SET
switch momentary. For example, the
set speed decreases about 4 km/h (4 mph) by pressing the SET
switch 4 times.

4–161
When Driving
i-ACTIVSENSE
NOTE
  (With cruise control)  When the vehicle set speed is displayed in the instrument cluster, press the RES /
switch to set the displayed vehicle speed.
 (With Mazda Radar Cruise Control (MRCC))  When the vehicle set speed is displayed in the instrument cluster, press the RES switch
to set the displayed vehicle speed.
  The system is temporarily cancelled when the vehicle is accelerated by depressing the
accelerator pedal strongly, however, it resumes when the vehicle speed decreases to the
set speed or less.
  The vehicle speed may exceed the set speed on a down slope.
Temporarily Cancelling the System
The system is temporarily cancelled (stand-by status) when any of the following operations
is done while the adjustable speed limiter is displayed.
 


 OFF/CAN switch is pressed



 Accelerator pedal is strongly depressed

With cruise control
Press the RES /
switch to resume the operation at the previous set speed. The adjustable
speed limiter display remains displayed.
With Mazda Radar Cruise Control (MRCC)
Press the RES switch to resume the operation at the previous set speed. The adjustable speed
limiter display remains displayed.
NOTE
  (With cruise control)  The set speed can be set by pressing the SET switch while the system is in stand-by
status.
 (With Mazda Radar Cruise Control (MRCC))  The set speed can be set by pressing the SET or SET switch while the system is in
stand-by status.
  The adjustable speed limiter is not cancelled by depressing the brake pedal.

4–162
When Driving
i-ACTIVSENSE
*Some models.
Advanced Smart City Brake Support (Advanced SCBS)
(Except Indonesia, Malaysia, and Thailand)
*
The Advanced Smart City Brake Support (Advanced SCBS) alerts the driver of a possible
collision using the display and a warning sound when the Forward Sensing Camera (FSC)
detects a vehicle ahead or pedestrian and determines that a collision with the object is
unavoidable while the vehicle is driven at a vehicle speed of about 4 to 80 km/h (2 to
50 mph) if the object is a vehicle ahead and about 10 to 80 km/h (6.2 to 50 mph) if the
object is a pedestrian. In addition, the system reduces damage in the event of a collision by
operating the brake control (SCBS brake) when the system determines that a collision is
unavoidable. In addition, when the driver depresses the brake pedal, the brakes are applied
¿ rmly and quickly to assist. (Brake Assist (Advanced SCBS brake assist))


Forward Sensing
Camera (FSC)

WARNING
Do not rely completely on the Advanced Smart City Brake Support (Advanced SCBS)
system:
 
 The Advanced Smart City Brake Support (Advanced SCBS) system is only designed
to reduce damage in the event of a collision. Over reliance on the system leading to
the accelerator pedal or brake pedal being mistakenly operated could result in an
accident.
  The Advanced Smart City Brake Support (Advanced SCBS) system operates in
response to a vehicle ahead or a pedestrian. The system does not operate in response
to obstructions such as a wall, 2-wheeled vehicles, or animals.

4–163
When Driving
i-ACTIVSENSE
CAUTION
In the following cases, turn the system off to prevent a mis-operation:  
 The vehicle is being towed or when towing another vehicle. 
 The vehicle is on a chassis roller. 
 When driving on rough roads such as in areas of dense grass or off-road.
Refer to Stopping the Advanced Smart City Brake Support (Advanced SCBS) System
Operation on page 4-165 on how to turn off the Advanced Smart City Brake Support
(Advanced SCBS) system.

4–16 4
When Driving
i-ACTIVSENSE
NOTE
  The Advanced Smart City Brake Support (Advanced SCBS) system will operate under
the following conditions.
 


 The engine is running.



 The Smart City Brake Support (SCBS) warning light (amber) does not illuminate.



 (Object is vehicle ahead) 
 The vehicle speed is between about 4 to 80 km/h (2 to 50 mph).



 (Object is a pedestrian) 
 The vehicle speed is between about 10 to 80 km/h (6.2 to 50 mph).



 The Advanced Smart City Brake Support (Advanced SCBS) system is not turned off. 

 Under the following conditions, the Advanced Smart City Brake Support (Advanced
SCBS) system may not operate normally:
 


 The Advanced Smart City Brake Support (Advanced SCBS) system will not operate
if the driver is deliberately performing driving operations (accelerator pedal and
steering wheel).
 


 If there is the possibility of partial contact with a vehicle ahead.



 The vehicle is driven on a slippery road surface such as wet roads or icy or snow-
bound roads.
 


 The braking performance is adversely affected due to cold temperatures or wet
brakes.
 


 The vehicle is driven at the same speed as the vehicle ahead.



 The accelerator pedal is depressed.



 The brake pedal is depressed.



 The steering wheel is being operated.



 The selector lever is being operated. 

 In the following cases, the Advanced Smart City Brake Support (Advanced SCBS)
may operate.
 


 Objects on the road at the entrance to a curve.



 Vehicles passing in the opposite lane while making a curve.



 When passing through a toll gate.



 When passing through low gates, narrow gates, car washing machines, or tunnels.



 If you suddenly come close to a vehicle ahead.



 2-wheeled vehicles, animals, or standing trees. 

 (Manual transaxle)  If the vehicle is stopped by the SCBS operation and the clutch pedal is not depressed,
the engine stops.