2017 KIA OPTIMA PLUG-IN HYBRID Owners Manual

Page 377 of 686

KIA OPTIMA PLUG-IN HYBRID 2017  Owners Manual Bluetooth® Wireless Technology
(Type B-2)
When No Devices have been Paired
1. çress  the /PHONE  button  or
the   button  on  the  steering
wheel  controls.  The  following
screen is displayed.
2.

Page 378 of 686

KIA OPTIMA PLUG-IN HYBRID 2017  Owners Manual êome phones (i.e., içhone®
, Android and
Blackberry phones) may offer an option 
to  allow  acceptance  of  all  future  Blue‐
tooth  connection  requests  by  default." and  "Visit  http

Page 379 of 686

KIA OPTIMA PLUG-IN HYBRID 2017  Owners Manual • çaired  çhone:  Device  that  is  pairedbut not connected.
Connecting a Device
From  the  paired  phone  list,  select  the
device  you  want  to  connect  and  press
the [Connect] (1) button.
D

Page 380 of 686

KIA OPTIMA PLUG-IN HYBRID 2017  Owners Manual çhone Menus
With  a  Bluetooth ®
  Wireless  Technology
device  connected,  press  the 
/PHONE  button  to  display  the  çhone
menu screen. • Dial  Number:  Displays  the  dial  screen where  nu

Page 381 of 686

KIA OPTIMA PLUG-IN HYBRID 2017  Owners Manual NOTICE
•When an incoming call pop-up is
displayed, most Audio and êETUç
mode features are disabled. Only
the call volume will operate.
•The telephone number may not be
properly displayed in some

Page 382 of 686

KIA OPTIMA PLUG-IN HYBRID 2017  Owners Manual NOTICE
•Up to 1,000 contacts entries can
be copied into car contacts.
•Upon downloading contacts data,
previously saved contacts data will
be deleted.
•Downloading is not possible if the
contact

Page 383 of 686

KIA OPTIMA PLUG-IN HYBRID 2017  Owners Manual 4. êêç: êecure êimple çairing[Non êêç supported device] 
After  a  few  moments,  a  screen  is
displayed  where  the  passkey  is  en‐
tered.
Enter  the  passkey  L

Page 384 of 686

KIA OPTIMA PLUG-IN HYBRID 2017  Owners Manual NOTICE
•The waiting period during phone
pairing will last for one minute.
The pairing process will fail if the
device is not paired within the giv‐
en time. If the pairing process
fails, you must