2017 KIA OPTIMA PLUG-IN HYBRID Owners Manual

Vehicle to vehicle distance
setting
To set vehicle to vehicle distance:
0+'
This function allows you to program
the vehicle to maintain relative distance to the vehicle ahead without depressing
the accelerator pedal or brake pedal.
The vehicle to vehicle distance will au‐
tomatically activate when the advanced smart cruise control system is on.
Select the appropriate distance accord‐
ing to road conditions and vehicle
speed. Each time the button is pressed, the
vehicle to vehicle distance changes as
follows:
%JTUBODF
 %JTUBODF
 %JTUBODF

%JTUBODF


For example, if you drive at 90 km/h
(56 mph), the distance maintain as fol‐ lows: Distance 4 - approximately 52.5 mDistance 3 - approximately 40 mDistance 2 - approximately 32.5 mDistance 1 - approximately 25 m
NOTICE
The 'Distance 4' is always set when
the system is used for the first time
after starting the engine.
The advanced smart cruise control
system remember the last vehicle to
vehicle distance which the driver
used in the vehicle with AEB.
Driving your vehicle
7-64

To set vehicle to vehicle distance:
%JTUBODF
 %JTUBODF
%JTUBODF
 %JTUBODF
0+' 0+'
0+' 0+'
• The vehicle will maintain the set
speed, when the lane ahead is clear.
• The vehicle will slow down or speed up to maintain the selected distance,when there is a vehicle ahead of you
in the lane. (A vehicle will appear in
front of your vehicle in the LCD dis‐
play only when there is an actual ve‐
hicle in front of you)
• If the vehicle ahead speeds up, your vehicle will travel at a steady cruising
speed after accelerating to the selec‐
ted speed.
CAUTION
•The warning chime sounds andLCD display blinks if it is hard tomaintain the selected distance tothe vehicle ahead.
•If the warning chime sounds, ac‐tively adjust the vehicle speed bydepressing the brake pedal accord‐ing to the road condition aheadand driving condition.
(Continued)

7-65
7
Driving your vehicle

(Continued)
•Even if the warning chime is notactivated, always pay attention tothe driving conditions to preventdangerous situations from occur‐ring.
Collision alert
0+'
When the ASCC system is on, and there
is a high risk of collision due to sudden braking of the vehicle in front or not
securing enough space with the vehicle
in front, the driver needs to control the brake system or the steering wheel
manually. In this case, the collision alert
warning displays on the instrument cluster and warning sounds. Decrease
vehicle speed immediately.
WARNING
•Even when the indicator displayingthe distance with the vehicle infront does not blink or the collisionalert does not sound, always drivesafely.
•Depending on the use of radio,sound quality, and driving condi‐tions, you may not be able to hearthe warning sound. Therefore, al‐ways pay close attention to trafficin front.
0+'-
Driving your vehicle
7-66

CAUTION
If the vehicle ahead (vehicle speed:less than 30 km/h) disappears to thenext lane, the warning chime willsound and a message will appear.Adjust your vehicle speed for vehi‐cles or objects that can suddenly ap‐pear in front of you by depressingthe brake pedal according to theroad condition ahead and drivingcondition.
In traffic situation
0+'-
In traffic, your vehicle will stop if the
vehicle ahead of you stops. Also, if the vehicle ahead of you starts moving,
your vehicle will start as well. However,
if the vehicle stops for more than 3 seconds, you must depress the acceler‐
ator pedal or move up/down the lever
(to RES+ or SET-) to start driving.
Radar to detect distance to the
vehicle ahead
0+')1
The sensor detects the distance to the
vehicle ahead.
If the sensor is covered with dirt or
other foreign matter, the vehicle to ve‐
hicle distance control may not operate
correctly.
Always keep the area in front of the sensor clean.

7-67
7
Driving your vehicle

Radar check message
0+'-
If the radar or cover is dirty or ob‐
scured with foreign matter such as snow, this message will appear and it
will disappear after for a while. In this
case, the system may not function temporarily, but it does not indicate a
malfunction of the advanced smart
cruise control System. Clean the radar or cover by using a soft cloth and it will
operate normally.
SCC (Advanced smart cruise
control) malfunction message
0+'-
The message will appear when the ve‐
hicle to vehicle distance control system is not functioning normally.
We recommend have the system
checked by an authorized Kia dealer.
CAUTION
•Do not install accessories aroundthe sensor and do not replace thebumper by yourself. It may inter‐fere with the sensor performance.
•Always keep the sensor andbumper clean.
•To prevent sensor cover damagefrom occurring, wash the car witha soft cloth.
•Do not damage the sensor or sen‐sor area by a strong impact. If thesensor moves slightly off position,the advanced smart cruise controlsystem will not operate correctlywithout any warning or indicatorfrom the cluster.If this occurs, we recommend thatthe system be checked by an au‐thorized Kia dealer.
•Use only a genuine Kia sensor cov‐er for your vehicle. Do not paintanything on the sensor cover.
Driving your vehicle
7-68

To adjust the sensitivity of
advanced smart cruise control
0+'-
The sensitivity of vehicle speed when
following the front vehicle to maintain the set distance can be adjusted. Go to
the User Settings Mode (Driving Assist)
and select SCC (Advanced smart cruise control). You may select one of the
three stages you prefer. • Slow: Vehicle speed following the front ve‐
hicle to maintain the set distance is
slower than normal speed. • Normal:
Vehicle speed following the front ve‐hicle to maintain the set distance is
normal
• Fast: Vehicle speed following the front ve‐
hicle to maintain the set distance is
faster than normal speed.
NOTICE
The last selected mode is remained
in the system
To convert to cruise control
mode:
0+'-
0+'-

7-69
7
Driving your vehicle

The driver may choose to only use the
cruise control mode (speed control function) by doing as follows: 1. Turn the advanced smart cruise control system on (the cruise indi‐
cator light will be on but the sys‐
tem will not be activated).
2. Push the distance to distance switch for more than 2 seconds.
3. Choose between "Advanced smart cruise control (SCC) mode" and
"Cruise control (CC) mode".
WARNING
When using the cruise control mode,you must manually access the dis‐tance to other vehicles as the sys‐tem will not automatically brake toslow down for other vehicles.
Limitations of the system
0+'
The advanced smart cruise control sys‐
tem may have limits to its ability to de‐ tect distance to the vehicle ahead due
to road and traffic conditions.
On curves
• On curves, the advanced smart cruise control system may not detect a
moving vehicle in your lane, and then your vehicle could accelerate to the
set speed. Also, the vehicle speed will
rapidly down when the vehicle ahead
is recognized suddenly. • Select the appropriate set speed on
curves and adjust your vehicle speedby depressing the accelerator or
brake pedal according to the road
condition ahead and driving condition.
0+'
• Your vehicle speed can be reduced due to a vehicle in the adjacent lane.
Adjust your vehicle speed by depress‐ ing the brake pedal according to the
road condition ahead and driving con‐
dition. Apply the accelerator pedal
and select the appropriate set speed.
Check to be sure that the road condi‐ tions permit safe operation of the
advanced smart cruise control.
Driving your vehicle
7-70

On inclines
0+'
• During uphill or downhill driving, theadvanced smart cruise control sys‐
tem may not detect a moving vehicle in your lane, and cause your vehicle
to accelerate to the set speed. Also,
the vehicle speed will rapidly down
when the vehicle ahead is recognized
suddenly.
• Select the appropriate set speed on inclines and adjust your vehicle speed
by depressing the accelerator or
brake pedal according to the road
condition ahead and driving condition.
Lane changing
0+'
• A vehicle which moves into your lane from an adjacent lane cannot be rec‐
ognized by the sensor until it is in the sensor's detection range.
• The sensor may not detect immedi‐ ately when a vehicle cuts in suddenly.
Always pay attention to the traffic,
road and driving conditions.
• If a vehicle which moves into your lane is slower than your vehicle, yourspeed may decrease to maintain the
distance to the vehicle ahead.
• If a vehicle which moves into your lane is faster than your vehicle, your
vehicle will accelerate to the selected
speed.
0+'
• Your vehicle may accelerate when a vehicle ahead of you disappears.
• When you are warned that the vehi‐ cle ahead of you is not detected,drive with caution.

7-71
7
Driving your vehicle