2015 Peugeot RCZ Owner's Manual

05
223
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Configure the filtering and display of TMC messages
TMC (Traffic Message Channel) messages with GPS Navigation provide traffic information in real time.
Press the TRAFFIC button to display the
"Traffic
information" menu.
Select the "Geographic
filter" function
and
confirm. The system offers a choice of:
-
"Retain all the messages",
or
-
"Retain the messages"
● "Around the vehicle ",
(confirm
the mileage to modify and select
the distance),
●

"On the route".
Confirm
"OK" to save the modifications.
We recommend:
- a
filter on the route and
- a
filter around the vehicle of:
-

12 miles (20 km) in urban areas,
-


30 miles (50 km) on motorways.
TRAFFIC INFORMATION

05
224
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Principal TMC symbols
Red and yellow triangle: traffic information, for example:
Black and blue triangle: general information, for example:
W
eather reports
Modified signage
Risk of explosion Traffic
reports
Narrow carriageway
Road closed
Wind
Slippery surface
Demonstration Fog
Accident
Danger
Parking
Delay
No entry Snow / ice
Roadworks
Traffic
jam
Receiving TA messages
The TA (Traffic Announcement) function gives priority to T A alert messages.
To operate, this function needs good reception of a
radio
station transmitting this type of message. When a traffic report
is transmitted, the current audio source (Radio, CD, USB, ...) is
interrupted automatically to play the

TA message. Normal playback
of the audio source resumes at the end of the transmission of
the
message. Press RA
d IO to display the menu.
Select "Service announcements" then
confirm.
Activate or deactivate "TA "
then confirm.
The volume setting for TA messages can be adjusted only during the
transmission of this type of alert. Activate or deactivate the function at any time by pressing
the button.
During a message, press the button to interrupt it.
TRAFFIC INFORMATION

06
225
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Access to the "TELEPHONE" menu
"Telephone"" d ial"
"
d irectory of contacts"
"Contacts management "
"Phone functions "
"Bluetooth functions "
"Hang up "
Go from the list to the menu (left/right). or
List of recent calls sent and
received with the telephone
connected to the system.
Press this button.
To

make

a

call,

select

a

number

in

the

list

and

confirm

" OK"
to start the call.
Connecting a different telephone deletes the list of
recent calls. No telephone connected.
Telephone connected.
Incoming call.
Outgoing call.
Synchronisation of
contacts in progress.
Telephone call in
progress.
In the top bar of the permanent
display
USING THE TELEPHONE

06
226
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
Pairing a Bluetooth® telephone
First connectionFor reasons of safety and because they require prolonged attention on the part of the driver , the operations for pairing the Bluetooth
mobile telephone to the hands-free system of the audio unit must be
carried out with the vehicle stationary.
In the Bluetooth menu of your telephone, select the
name "PEUGEOT" from the list of devices detected. Press this button.
Select "Bluetooth functions" and
confirm.
Select "Peripherals search " and
confirm.
The list of peripheral devices detected
is displayed. Wait until the "Connect"
button is available.
You can check the compatibility of your telephone at
www.peugeot.co.uk (services).
Activate the telephone's Bluetooth function
and ensure that it is "visible to all" (telephone
configuration).
Quick procedure from the telephone
Enter

a

minimum

4

figure

code

in

the

telephone

and

confirm. Enter the same code in the system,
select "

OK"

and

confirm. Procedure from the system

06
227
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
Select "Connect" and confirm.
The system of fers to connect the
telephone:
-

in "
Hands-free mode" (telephone
only),
-

in "
Audio" mode (streaming: playing
music
files on the telephone),
-

or "
All" (for selection of both
modes).
Select "OK"
and confirm. Then accept automatic connection on the telephone to allow the
telephone to reconnect automatically every time the vehicle is
started.
The ability of the system to connect in only one mode depends on
the telephone. The two modes may both connect by default. The "Hands-free mode" should be used in preference if
"Streaming" is not desired.
The services available depend on the network, the SIM card and the compa\
tibility of the Bluetooth telephone used. Check the telephone
manual and with your network provider for details of the services availa\
ble to you.
Depending on the type of telephone, the system will ask you to
accept or not the transfer of your contacts.
On return to the vehicle, the last telephone connected
automatically reconnects, within around 30 seconds after
switching on the ignition (Bluetooth activated and visible).
To modify the automatic connection mode, remove the pairing
and pair the telephone again with the desired mode.
Enter
a minimum 4 figure code in the telephone
and

confirm.
Enter the same code in the system,
select "OK" and confirm.
Select the name of the desired
peripheral from the list of devices
detected
then confirm.

06
228
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
directory configuration / Synchronisation with the telephone
Press PHONE then select "Contacts
management" and confirm.
Select "New contact" to enter a new
contact.
Select "Sort by Name/First name" or
"Sort by First name/Name" to choose
the order in which they appear.
Select "
d elete all contacts" to delete
the contacts saved in the system. Select "Synchronization options
":
-

No synchronization: only the
contacts saved in the system
(always present).
-


Display telephone contacts: only the
contacts saved in the telephone.
-


Display SIM card contacts: only the
contacts saved on the SIM card.
-


Display all phone contacts:
contacts on the SIM card and in the
telephone.
Select "

Import all the entries" to import
all the contacts in the telephone and
save them in the system.
Once imported, a contact remains visible
whatever telephone is connected.
Select "Contact mem. status" to see the
number of contacts saved in the system
or imported, and the free memory.

06
229
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Editing, importing or deleting a contact
Press PHONE then select "directory of
contacts " and confirm.
Select "Search", then turn the knob to
choose in numerical or alphabetical order
a group of contacts from the entries made
previously,
then confirm.
Go to the list of contacts, select the
desired
contact then confirm.
Select "Open" to view a contact on the
telephone or modify a contact saved in
the system.
Select "Import" to copy a contact from
the telephone to the system.
Select "
d elete" to delete a contact
recorded in the system.
USING THE TELEPHONE
Select OK or press the back button to exit
this menu.
Once the contact has been imported, the Bluetooth symbol
disappears, replaced by the telephone symbol which shows that the
contact has been saved in the system. It is not possible to modify or delete contacts in the telephone or the \
SIM card via the Bluetooth connection.
In the "
d
irectory of contacts" menu, the import and deletion of
contacts is done one by one.

06
230
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
Press PHONE twice.
Select "d ial" then confirm. Select "
d irectory of contacts" then
confirm.
Dial the telephone number using the
virtual keypad selecting each number
in turn.
Confirm
"OK" to make the call. Press TEL or twice on PHONE.
Calling a new number
Calling a contact
Select the desired contact and confirm.
If access was via the PHONE button,
select "Call"
and confirm.
Select
the number and confirm to start
the call.
Making a callUse of the telephone is not recommended while driving. We recommended
that you park safely or make use of the steering mounted controls.