2015 MITSUBISHI L200 Owner's Manual (in English)

3.Remove the socket and bulb assembly
together by turning it anticlockwise, and then remove the bulb by pulling it out.
4. To install the bulb, perform the removal
steps in reverse.
Licence plate lamps
E01004602123
1. Insert a straight blade (or minus) screw-
driver into the lamp assembly and pry
gently to remove it.
NOTEl Wrap a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
lens and the body.2. Remove the socket and bulb assembly
together by turning it anticlockwise, and then remove the bulb by pulling it out.
3. To install the bulb, perform the removal
steps in reverse.
NOTEl When mounting the lamp unit, put the hook
(A) on the right side of the lamp unit into thebody first.
Replacement of lamp bulbs
10-35OKTE15E3Maintenance10

NOTEFront room lamp and personallamps*
E01004700364
1. Insert a straight blade (or minus) screw-
driver into the notch of the lens and pry gently to remove it.
Remove the bulb from the lamp holder.
NOTEl Wrap a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
lens.
2. To install the bulb, perform the removal
steps in reverse.
NOTEl When installing the lens, align the 2 tabs on
the lens with the holes on the vehicle side.Rear room lamp*
E01004901392
Type 1
1. Insert a straight blade (or minus) screw-
driver into the notch of the lens and pry
gently to remove it. Remove the bulb
from the lamp holder.NOTEl Wrap a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
lens.
2. To install the bulb, perform the removal
steps in reverse.
NOTEl When installing the lens, fit the two tabs on
one side of the lens into the holes on the ve-hicle side before fitting the two tabs on the opposite side of the lens into the holes on the
vehicle side.
Replacement of lamp bulbs
10-36OKTE15E3Maintenance10

NOTE
Type 2
1.Insert a straight blade (or minus) screw-
driver into the notch of the lens and pry gently to remove it. Remove the bulb
from the lamp holder.
NOTEl Wrap a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
lens.
2. To install the bulb, perform the removal
steps in reverse.
NOTEl When installing the lens, align the 2 tabs on
the lens with the holes on the vehicle side.Door courtesy lamps*
E01005400238
1. Insert a straight blade (or minus) screw-
driver into the lens and pry gently to re-
move it. Remove the bulb from the lamp
holder.NOTEl Wrap a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
lens.
2. To install the bulb, perform the removal
steps in reverse.
Replacement of lamp bulbs
10-37OKTE15E3Maintenance10

NOTElWhen installing the lens, align the 2 tabs on
the lens with the holes on the vehicle side.Glove box lamp
E01006100069
We recommend you to have the glove box
lamp replaced by a specialist.
Centre console downlight
E01008700144
Type 1Type 2Type 1
We recommend you to have the centre con-
sole downlight replaced by a specialist.
Type 2
1. Insert a straight blade (or minus) screw-
driver with a cloth over its tip at edge of
the garnish (A) and pry gently to remove it.
2. Turn the bulb socket (B) anticlockwise
to remove it.
3. Remove the bulb by pulling out.
4. To install the bulb, perform the removal
steps in reverse.
Replacement of lamp bulbs
10-38OKTE15E3Maintenance10

Vehicle labeling................................................................................ 11-02
Vehicle dimensions........................................................................... 11-04
Vehicle performance......................................................................... 11-10 Vehicle weight.................................................................................. 11-11
Engine specifications........................................................................ 11-16
Transmission specifications.............................................................. 11-17
Electrical system............................................................................... 11-18
Tyres and wheels...............................................................................11-19
Other specifications...........................................................................11-19
Fuel consumption.............................................................................. 11-20
Refill capacities................................................................................. 11-22Specifications
OKTE15E311

Vehicle labelingE01100101791
Vehicle identification number
The vehicle identification number is stamped as shown in the illustration.
Vehicle information code plate
The vehicle information code plate is located as shown in the illustration.
The plate shows model code and engine mod-
el, transmission model and body colour code,
etc.
Please use this number when ordering re-
placement parts.
1- Model code
2- Engine model code
3- Transmission model code
4- Body colour code
5- Interior code
6- Option code
Vehicle labeling
11-02OKTE15E3Specifications11

Vehicle identification numberplate (RHD vehicles only)
The vehicle identification number is stamped on the plate riveted to the left front corner of the instrument panel pad. It is visible from
outside of the vehicle through the wind- screen.
Engine number
The engine number is stamped on the enginecylinder block as shown in the illustration.Vehicle labeling
11-03OKTE15E3Specifications11

Vehicle dimensionsE01100204070
Vehicle dimensions
11-04OKTE15E3Specifications11Single Cab