2015 MITSUBISHI L200 Owner's Manual (in English)

: Medium amount of air from the ventila-
tors
: Large amount of air from the ventilators
Face position
Air flows only to the upper part of the pas-
senger compartment.
Foot/Face position
Air flows to the upper part of the passenger
compartment, and flows to the leg area.
: Optional equipment
NOTEl With the mode selection dial between the
“” and “” positions, air flows mainly
to the upper part of the passenger compart-
ment. With the mode selection dial between
the “
” and “” positions, air flows
mainly to the leg area.
Foot position
Air flows mainly to the leg area.
: Optional equipmentFoot/Demister position
Air flows to the leg area, the windscreen and
the door windows.
: Optional equipment
NOTEl With the mode selection dial between the
“” and “” positions, air flows mainly
to the leg area. With the mode selection dial
between the “
” and “” positions, air
flows mainly to the windscreen and door
windows.Ventilators
7-03OKTE15E3For pleasant driving7

Demister position
Air flows mainly to the windscreen and thedoor windows.
Heater/Manual air
conditioning* E00700500410
The heater/air conditioning can only be usedwhile the engine is running.
Control panel
E00700600512
1- Mode selection dial
2- Rear window demister switch ® p. 5-43
3- Blower speed selection dial
4- Air conditioning switch*
5- Temperature control dial
6- Air selection lever
Blower speed selection dial
E00700700119
Select the blower speed by turning the blower
speed selection dial clockwise or anticlock- wise.
The blower speed will gradually increase as
the dial is turned to the right.
When the blower speed selection dial is set to the “OFF” position, all fan-driven airflow
will stop.
Heater/Manual air conditioning*
7-04OKTE15E3For pleasant driving7 LHD RHD

Temperature control dial
E00700900209
Turn the temperature control dial clockwise
to make the air warmer. Turn it anticlockwise
to make the air cooler.NOTEl While the engine coolant temperature is low,
the temperature of the air from the heaterwill be cool/cold until the engine warms up, even if you have selected warm air with the
dial.Mode selection dial
E00701100266
To change the position and amount of air
flowing from the ventilators, turn the mode
selection dial. (Refer to “Changing the mode selection” on page 7-02.)
Air selection lever
E00701300460
To change the air selection, use the air selec-
tion lever.
l “
” Outside air
Outside air is introduced into the passen-
ger compartment.
l “
” Recirculated air
Air is recirculated inside the passenger
compartment.
Heater/Manual air conditioning*
7-05OKTE15E3For pleasant driving7 LHD RHD

CAUTIONlNormally, use the “” (outside) position
to keep the windscreen and side windows clear and quickly remove fog or frost from
the windscreen.
If high cooling performance is desired, or if
the outside air is dusty or otherwise contami-
nated, use the “
” (recirculation) position.
Set the air selection lever to the “
” (out-
side) position periodically to increase venti-
lation so that the windows do not become fogged up.
l Use of the “
” (recirculation) position for
extended time may cause the windows to fog up.
Air conditioning switch*
E00701500781
Push the switch, and the air conditioning
compressor will turn on. The air conditioning
indication lamp (A) will come on.
Push the switch again and the air condition-
ing compressor will stop and the indication
lamp goes off.
CAUTIONl When using the air conditioning, the idling
speed may slightly increase as the air condi- tioning compressor is switched on/off auto-
matically. While the vehicle with an A/T is
stationary, fully depress the brake pedal to
prevent the vehicle from creeping.Operating the air conditioning
system
E00701800247
Heating
Set the mode selection dial to the “” posi-
tion and set the air selection lever to the
“
” (outside) position.
Turn the temperature control dial clockwise
or anticlockwise to the desired temperature. Select the desired blower speed.NOTEl For maximum heat, set the blower speed at
the 3 rd
position.
Heater/Manual air conditioning*
7-06OKTE15E3For pleasant driving7 LHD RHD LHD RHD

Cooling (vehicles with air condi-tioning)
E00701900424
1. Set the mode selection dial to the “”
position.
2. Set the air selection lever to the “
”
(outside) position.
3. Push the air conditioning switch (B).
4. Change the temperature by turning the
control dial clockwise or anticlockwise.
5. Select the desired blower speed.CAUTIONl If the outside air is dusty or otherwise conta-
minated, or if high cooling performance is
desired, set air selection lever to the “
”
(recirculation) position and the temperature control dial all the way to the left.
Set to the “
” (outside) position periodi-
cally to increase ventilation so that the win- dows do not become fogged up.
Combination of unheated air
and heated air
E00702000451
Select the mode selection dial to the position shown in the illustration and set the air selec- tion lever to the “
” (outside) position.
The air flow will be directed to the leg area
and the upper part of the passenger compart-
ment. Select the desired blower speed.
Warm air flows to the leg area and unheated
or slightly warm air (depending upon temper-
ature setting) flows to the upper part of the
passenger compartment.
Demisting of the windscreen
and door windows
E00702100579
CAUTIONl For safety, make sure you have a clear view
through all the windows.
To remove frost or mist from the windscreen
and door windows, use the mode selection di-
al (“
” or “”).
Heater/Manual air conditioning*
7-07OKTE15E3For pleasant driving7LHD RHD LHD RHD

For ordinary demisting
Use this setting to keep the windscreen anddoor windows clear of mist, and to keep the
leg area heated (when driving in rain or
snow).
1. Set the air selection lever to the “”
(outside) position.
2. Set the mode selection dial to the “
”
position.
3. Select your desired blower speed by turning the blower speed selection dial.
4. Select your desired temperature by turn- ing the temperature control dial.
5. Push the air conditioning switch (B). (vehicles with air conditioning)
For quick demisting
1. Set the air selection lever to the “”
(outside) position.
2. Set the mode selection dial to the “
”
position.
3. Set the blower to the maximum speed. 4. Set the temperature to the maximum temperature position.
5. Push the air conditioning switch (B). (vehicles with air conditioning)
NOTEl To demist effectively, direct the air flow
from the side ventilators towards the door windows.
l Do not set the temperature control dial to the
max. cool position. Cool air will blow
against the window glasses and form mist on them.
Heater/Manual air conditioning*
7-08OKTE15E3For pleasant driving7LHD RHD LHD RHD

Introduction of outside air
E00702200235
To introduce air into the vehicle during hot
weather, set the air selection lever to the “
” (outside) position and set the tempera-
ture control dial to the positions shown in the
illustration. Be sure to set the temperature
control dial all the way to the left. Select the desired blower speed.
NOTEl Turn the mode selection dial clockwise and
air will flow to the leg area and the wind-
screen.Automatic air conditioning*
E00702400110
The air conditioning can only be used whilethe engine is running.
Control panel
E00702502551
Type 1Type 2
1- Mode selection dial
2- Blower speed selection dial
3- Temperature control dial
4- Rear window demister switch ® p. 5-43
5- Air conditioning switch
6- Air selection switch
NOTEl There is an interior air temperature sensor
(A) in the illustrated position.
Automatic air conditioning*
7-09OKTE15E3For pleasant driving7 LHD RHD

NOTENever place anything on top of the sensor,
since doing so will prevent it from function- ing properly.Blower speed selection dial
E00702800273
Select the blower speed by turning the blower
speed selection dial clockwise or anticlock- wise.
The blower speed will gradually increase as
the dial is turned to the right.
When the blower speed selection dial is set to
the “OFF” position, all fan-driven airflow
will stop.Temperature control dial
E00703000575
Turn the temperature control dial clockwise
to make the air warmer. Turn it anticlockwise
to make the air cooler.
Type 1Type 2

Automatic air conditioning*
7-10OKTE15E3For pleasant driving7 RHD
LHD