2015 MITSUBISHI L200 Owner's Manual (in English)

Mass group
Seating positionFront passengerActivated airbagDeactivated airbag#I-9 to 18 kgXL*2II-15 to 25 kgXL*3III-22 to 36 kgXL*3
#
: With front passenger’s airbag deactivated by means of front passenger’s airbag ON-OFF switch
CAUTIONl When installing a child restraint system, remove the head restraint from the seat.Key of letters to be inserted in the table above:
l
L- Suitable for particular child restraints in the following list (MITSUBISHI MOTORS GENUINE parts).
l X- Seat position not suitable for children in this mass group.
L (Genuine part information) Genuine parts No.UN-R44 Approval No.*1MZ314393E1-04301146*2MZ313045E1-04301133*3MZ314250E1-04301169
Child restraint
4-19OKTE15E3Seat and seat belts4

NOTElThere is no applicable MITSUBISHI MOTORS GENUINE Parts to the Mass Group “0-Up to 10 kg”.

MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For further information, please contact a MITSUBISHI MOTORS Authorized Service Point.Single cab (Bench seat)
Mass group
Seating positionFront passengerFront centreActivated airbagDeactivated airbag #0- Up to 10 kgXXX0+- Up to 13 kgXL*1XI-9 to 18 kgXL*2XII-15 to 25 kgXL*3XIII-22 to 36 kgXL*3X
#
: With front passenger’s airbag deactivated by means of front passenger’s airbag ON-OFF switch
CAUTIONl When installing a child restraint system, remove the head restraint from the seat.Key of letters to be inserted in the table above:
l
L- Suitable for particular child restraints in the following list (MITSUBISHI MOTORS GENUINE parts).
l X- Seat position not suitable for children in this mass group.
Child restraint
4-20OKTE15E3Seat and seat belts4

L (Genuine part information) Genuine parts No.UN-R44 Approval No.*1MZ314393E1-04301146*2MZ313045E1-04301133*3MZ314250E1-04301169NOTEl
There is no applicable MITSUBISHI MOTORS GENUINE Parts to the Mass Group “0-Up to 10 kg”.

MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For further information, please contact a MITSUBISHI MOTORS Authorized Service Point.Club cab
Mass group
Seating positionFront passengerRear outboardActivated airbagDeactivated airbag #0- Up to 10 kgXXX0+- Up to 13 kgXL*1L*1I-9 to 18 kgXL*2L*2II-15 to 25 kgXL*3XIII-22 to 36 kgXL*3X
#
: With front passenger’s airbag deactivated by means of front passenger’s airbag ON-OFF switch
Child restraint
4-21OKTE15E3Seat and seat belts4

CAUTIONlWhen installing a child restraint system, remove the head restraint from the seat if the head restraint is adjustable.Key of letters to be inserted in the table above:
l
L- Suitable for particular child restraints in the following list (MITSUBISHI MOTORS GENUINE parts).
l X- Seat position not suitable for children in this mass group.
L (Genuine part information) Genuine parts No.UN-R44 Approval No.*1MZ314393E1-04301146*2MZ313045E1-04301133*3MZ314250E1-04301169NOTEl
There is no applicable MITSUBISHI MOTORS GENUINE Parts to the Mass Group “0-Up to 10 kg”.

MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For further information, please contact a MITSUBISHI MOTORS Authorized Service Point.Double cab
Mass group
Seating positionFront passengerRear outboardRear centreActivated airbagDeactivated airbag #0- Up to 10 kgXXUX
Child restraint
4-22OKTE15E3Seat and seat belts4

Mass group
Seating positionFront passengerRear outboardRear centreActivated airbagDeactivated airbag#0+- Up to 13 kgXL*1U, L* 1XI-9 to 18 kgXL*2U, L* 2L*2II-15 to 25 kgXL*3U, L* 3L*3III-22 to 36 kgXL*3U, L* 3L*3
#
: With front passenger’s airbag deactivated by means of front passenger’s airbag ON-OFF switch
CAUTIONl When installing a child restraint system, remove the head restraint from the seat.Key of letters to be inserted in the table above:
l
U- Suitable for “universal” category restraints approved for use in this mass group.
l L- Suitable for particular child restraints in the following list (MITSUBISHI MOTORS GENUINE parts).
l X- Seat position not suitable for children in this mass group.
L (Genuine part information) Genuine parts No.UN-R44 Approval No.*1MZ314393E1-04301146*2MZ313045E1-04301133*3MZ314250E1-04301169
Child restraint
4-23OKTE15E3Seat and seat belts4

NOTElThere is no applicable MITSUBISHI MOTORS GENUINE Parts to the Mass Group “0-Up to 10 kg”.

MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For further information, please contact a MITSUBISHI MOTORS Authorized Service Point.

Child restraint anchorage
points (Double cab)*
E00406900354
Anchorage locations
There are 2 child restraint anchorage points on the floor, located behind the rear seat.These are for securing a child restraint sys-
tem tether strap to each of the 2 rear seating positions in your vehicle.
*: Rear of the vehicle
CAUTIONl The anchorages are only applicable for child
restraints fitted in the rear seat.
Tether anchorage strap installa-
tion
WARNINGl Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attach-
ing other items or equipment to the vehi- cle.
1. Remove the head restraint from the loca-
tion in which you wish to install a child
restraint.
2. Drop the child restraint’s tether strap (A)
down the back of the rear seatback.
Child restraint
4-24OKTE15E3Seat and seat belts4

3.Tip the armrest forward. Open the fas-
tener (B) that is located in the space where the armrest was stowed.
4. Put your hand in the opening of the fas-
tener, attach the tether strap’s hook (C)
to the tether anchorage (D), and securely tighten the tether strap.
Installing a child restraint sys-
tem to the lower anchorage (ISOFIX child restraint mount-ings)*
E00408900114
Your vehicle’s second seat is fitted with low-
er anchorages for attaching a child restraint
system with ISOFIX mountings.
Child restraint system with
ISOFIX mountings
E00409000574
The child restraint system is designed only
for seats that incorporate lower anchorages. Retain the child restraint system using the
lower anchorages.
It is not necessary to retain the child restraint
system using the vehicle’s seat belts.
A- Child restraint system connectors
To install
WARNINGl If there is any foreign material in or
around the connectors, remove it before
installing the child restraint system. Also, make sure the seat belt is away from, not
looped through or otherwise interfering
with, the child restraint system. If foreign matter is not removed and/or the seat belt interferes with the child restraint system,
the child restraint system will not be se-
cured properly and could move forward in the event of sudden braking or a colli-sion, seriously injuring the child and pos-
sibly other vehicle occupants.
Child restraint
4-25OKTE15E3Seat and seat belts4

WARNINGlWhen the vehicle is moving do not adjust
the seat where the child restraint system
is installed.
1. Remove the head restraint from the loca-
tion in which you wish to install a child
restraint. Refer to “Head restraints” on
page 4-08.
2. Push the child restraint system’s connec-
tors into the lower anchorages (A) in ac-
cordance with the instructions provided
by the child restraint system’s manufac-
turer.
If your child restraint system requires
the use of a tether strap, fasten the tether strap in accordance with steps 3 through
5. If a tether strap is unnecessary, per- form the step 6.
3. Drop the child restraint’s tether strap (B)
down the back of the rear seatback.
4. Tip the armrest forward. Open the fas-
tener (C) that is located in the space where the armrest was stowed.
5. Put your hand in the opening of the fas-
tener, attach the tether strap’s hook (D)
to the tether anchorage (E), and securely
tighten the tether strap.
6. Push and pull the child restraint system
in all directions to be sure it is firmly se- cured.
To remove
Remove the child restraint in accordance
with the instructions provided by the child re-
straint system’s manufacturer.
Child restraint
4-26OKTE15E3Seat and seat belts4